How to Replace a Clutch in 110cc 125cc Quad in 15 minutes.
Vložit
- čas přidán 1. 03. 2020
- Video how to step by step at home easy and quick replace a clutch in 4 stroke 110cc 125cc Quad. As per our video in only takes 15 minutes to replace the clutch by your self in any 4 stroke Mini and Midi Quad Bike.
SHOP HERE 👇👇👇 🚚 Fast Delivery to 32 EU Countries
minibikes.store/Spare-Parts
Video Sponsored by: Nitro Motors
Please SUBSCRIBE to get latest videos about Mini Bikes
/ @minibikesstore
CONNECT WITH US HERE!
Facebook: / mini-bikes-store-37621...
VIDEO BLOG: minibikes.store/video-blog
Join our community “Mini Bikes International Support Group - Mini Pocket Bikes, Quads, Pit Bike”
/ 697980870366878
Please, support our channel with :
LIKE 👍
SHARE ✉
SUBSCRIBE ✔
How to Replace a Clutch in 110cc 125cc Quad in 15 minutes. - Auta a dopravní prostředky
SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries
minibikes.store/
Thanks for actually showing the things you need to check when looking for a new clutch!! Great video!!
thank you
My man 💯. Watched 10 videos refusing to explain the full process
Thank you very much very helpful
Thank you for your brilliant work. Keep it up, and GOD bless you.
good video thanks
Great video! Thank you
Thank you
Great video and explanation. Saved me $$$$$$$
The nuut
it's a good video .. one question, shouldn't there be anything more on the adjustment screw that sits on the cover `?
Pro tip: Order the tool when ordering the new clutch.
😂😂Mann you don’t even know my trouble
Is there a torque spec or just make sure its tight? Also thanks for the video.
Great video! Just what I needed. I'm going to assume an ATV clutch is an ATV clutch and give it a shot on my Honda Rancher. Thank you !
How did it work out ?
Tip use the correct tools first off you need an impact screwdriver and secondly you need a special socket to remove internal not without hammering a screwdriver and damaging
What jack do you use to lift atv ?
Do these type only go forward
What about the clutch adjustment?
Yes I need to know this. If I don't need a new clutch, how do I adjust it?
Brilliant.
Question, what oil do u use please?
use 10W40 4T motorcycle oil
How did u get those screws out the cover on the clutch there in there so tight i almost stripped them
Apply loosening pressure with screwdriver in the screw head and tap with a hammer if you don't have an impact driver
Actually they do make a removal tool to make the job easier.
nut has left hand threads, adjustment?
Hey i have a question
Hello. What oil??
What about adjustment
You missed putting on the washer
I don’t for work what do you say say Auto how do you do the quote that there behind the building
How didyou get yours to hold still every time i hit the nut with the screwdriver the whole engine turns
On the left side of the motor there is a plug. Unscrew that and it reveals a nut 9/16 socket and ratchet on it and turn the clutch until handle of the ratchet hits the foot peg. This will hold the motor from spinning when you are hitting the clutch nut. Hope this helps.
siema potrzebuje mini pomocy / widzialem ze 2 lata temu bawiłes sie z mini bike i posiadam mini crossa ale cos go boli///|\\\
siemka nwm czy mi pomozesz bo ten film ma juz 2 lata i czy dalej prowadzisz kanal/ em to mam problem z mini crossem mam gaznik z rometa 205 i dzialało lecz na cieplym po zgaszeniu nie bylo opcji odpalic wiec pomyslalem ze wszystko zdejmę wyszczyszcze poskladam i bedzie dzialac a tu dupa i jedynie co znalazlem to pęknietą uszczelke membrany wymienilem i dalej nic kombinuje juz miesiac i nadal brak reakcji./prosze pomóż.
PS.
mam 2 mini crossy i probowalem z inna cewka swiecą teoretycznie wszystko co sie da to zrobilem a on dalej nic nawet jak mu mieszanke przez otwor od swecy wlalem(2mini cross zatarty
Zapraszam do mnie na kanał video silnik 2t nie odpala
u have a video on how to adjust timing on these Chinese
I nid clutch plates
i like how nobody ever has a punch. Punch sales must be shit.
I żadnego docisku z polautomatu nie ma ? 😲😲😲😲😲
That small spring that goes inside the front of the clutch shown in the video dosnt seem to do anything .the spring just pushes in and out inside that small metal actuator on front of the clutch so It dosnt seem to do anything.
This video stopped my hemorrhoids.
My clutch spins I can’t get the nut off , what do I do ???? I can’t find any information on these
@@FAKE-NAME that’s what I did thank you!
What if the sprocket beside the clutch just spins freely can you buy that 🤷
U ever get a solution to this?
@@u.m.flavien5478 I did get it fixed finally got it off and replaced thanks
I can't get that clutch nut off. I've got the tool and tried banging it. No luck. Any tips
try to use a a flat screwdriver just to untight the first 1/4 of it then use the tool
To trzeba aż filmik nagrywać ,ja mam 15 lat i bym złożył cały silnik .
hack use the right tool tool bk 2
noot
Noot
Also what about clutch adjustment
These clutches don't have an adjustment. The Adjustment bolt just covers the gearbox cover hole.
@@NMEZero666 Thanks Miles, but what is the spring and cap that sits underneath do then? I cant find any info. I wouldnt think that would be underneath if they are just trying to close the hole. Thanks for any input man.
@@brianb5779 The spring and cap don't seem to do anything on the auto shift models but make all the pieces hold together and have some give.
There's a good video of a cut away gearbox with shifting parts that shows how the the nut and bolt function to adjust the clutch on a manual version here
czcams.com/video/PLq2bH_81EE/video.html
@@NMEZero666 Thank you very much Miles, i really appreciate that info. Have a good one brother.
@@brianb5779 Absolutely no problem. I think we all help each other out with these things here and there!
What the fuck did i just watch 😑