Cool video but I would suggest starting it like this, choke on, pull starter slowly, fully extending the rope 2 times, pull till you hear the starter engage and give it a quick pull, you should hear the engine try to start, choke off, little bit of throttle, pull slowly till starter engages, do quick pull till it starts
I'm wondering how much exhaust residue was left on the front end of your car? As soon as I can find a reliable spot to run a 1/5 scale I will have to get one of these guys. Awesome rigs, and the gas motors make everything more simple which means more fun. Can't wait to see er rip!
Do you know how to program a killer bee killswitch? I have a dx5c remote as well and I’m not sure exactly what to do through the remote. I have it plugged in on the buggy but when I turn off the remote while my battery is still plugged in it doesn’t beep or do anything so I’m thinking there’s something I have to do through the radio. Let me know if you know what I can possibly do, thanks !
Yes use race gas if possible and try and not let it sit with old fuel in it for long periods of time 👍👍👍I pull the motor strings once every three weeks 👍👍🔥🔥🔥🔥there a blast
@@earlmoorhead5555 thanks I got it used and they guy has 4 sets of wheels and tires 3 motors and 3 body's and eanugh parts to probably build a second one
Just make sure you dont run any TC-W in it. That stuff is for watercooled 2 cycles like outboard boat motors. Doesnt meet the requirements of an air cooled engine.
@@earlmoorhead5555 same here plus a lot of tools I use at work are 2 stroke. Preheating a brand new engine before starting helps. Also knowing which way choke is helps. A lot pulls with no fuel and oil on cold motor not a good thing. Knocking remote off and then picking it up to stand up again on table makes me question 40 yrs experience. Lay it down won’t tip over and fall. Good luck.
Real life experience are always shown here as ppl saying you have to pre heat ? I don’t agree with as that will depend on where you live and the weather conditions you run on ? Many factors to consider for sure I’ve never had a piece of equipment fail in my lifetime 🤷🏻♂️
There we go! Nice to see some 5th scale gas on the channel bruh. Keep her rich for break-in then have fun. Love the channel.
CrucialRC thank you brother love my 1/5 scales 💪💪👍👍🔥🔥🔥🙏🙏
What a beast 💪👌 , the Greenies won't like that one down at the park 😅
Speed Freak hahahahah ya but all the guys were out watching lmao 👍👍🔥🔥🔥
1/5 scale is the best. Good shit dude keep it up
Thanks 💪💪👍👍🔥🔥🔥🔥
absolutely epic
cool break in,that thing looks and sounds awesome
Island RC -Duke runs awesome even tho I didn’t open her up yet lmao 😂 but I cried a lot today lmao 😂😂🔥🔥🔥👍👍👍
@@earlmoorhead5555 lol,would love to have one,can't wait to see it rip.
Cool video but I would suggest starting it like this, choke on, pull starter slowly, fully extending the rope 2 times, pull till you hear the starter engage and give it a quick pull, you should hear the engine try to start, choke off, little bit of throttle, pull slowly till starter engages, do quick pull till it starts
I bet your neighbours are enjoying the run in process haha
Yes
@@earlmoorhead5555 legend dude keep up the good work
Thanks 🙏
Hate the Break in process lol, seemed to be a little rich with the amount of blue smoke... 💪🏾💯🚀🔥
Life of CoachD it’s full of oil I added a lot for break in 💪💪👍👍🔥🔥🔥👀👀👀
Makes sense 💪🏾💯🚀🔥
nice love this vid ill be getting one of the 5t soon how you like it so far
She’s sounds beautiful big bro congrats champ love the m3 sitting there looking very very pretty lol
Angel Fuentes thank you sounds good even without a pipe installed for now 👍👍🔥🔥🔥
Earl Moorhead Awsome pick up outtingup videos on my v4 kraton that just came in 😈😈😈
Angel Fuentes that should be a fun bashing rc it’s amazing how well it is out the box 👍👍🔥🔥🔥
Love the 5T 2.0!!
Keep pullin that starter like that itll come off in your hand!Secondly put a fan on the engine to get some cooling!!
I’m hoping so then I can upgrade it with a metal one but 6 month it’s still on not bad I better pull it harder 😂😂🤣🤣🤣
I'm wondering how much exhaust residue was left on the front end of your car? As soon as I can find a reliable spot to run a 1/5 scale I will have to get one of these guys. Awesome rigs, and the gas motors make everything more simple which means more fun. Can't wait to see er rip!
Way more run time but needs a pipe right away or clean ups a mess 💯💯💯💯
Do you know how to program a killer bee killswitch? I have a dx5c remote as well and I’m not sure exactly what to do through the remote. I have it plugged in on the buggy but when I turn off the remote while my battery is still plugged in it doesn’t beep or do anything so I’m thinking there’s something I have to do through the radio. Let me know if you know what I can possibly do, thanks !
I just set the kill switch to the channel I wanted to use I didn’t have to program my kill switch unit 👍💯
Earl Moorhead okay cool, I’ll give it a try. Thanks !
Hey earl beautiful losi 5t I just got mine today I’m supper stoked Any suggestions and tips I would really appreciate it great video 🤙🏼
Yes use race gas if possible and try and not let it sit with old fuel in it for long periods of time 👍👍👍I pull the motor strings once every three weeks 👍👍🔥🔥🔥🔥there a blast
Can I use any 2 stroke oil in this truck, I just bought one and I just want to got to auto zone or something
That’s what I do 👍👍
@@earlmoorhead5555 thanks I got it used and they guy has 4 sets of wheels and tires 3 motors and 3 body's and eanugh parts to probably build a second one
Just make sure you dont run any TC-W in it. That stuff is for watercooled 2 cycles like outboard boat motors. Doesnt meet the requirements of an air cooled engine.
Awesome new toy man. -"Angry" Dave
Nice beast time to get it dirty😀😀👍👍👊👊💪💪
Yes today the day to dial it in 💪💪👍👍🔥🔥🔥
Earl. What’s up good brother. Love the video
IkON RC’z thanks Ikon appreciate that brother 👍👍🔥🔥
Is the engine still running good with this break in method?
Yes still going my oldest one is 12 years still going 👌💯
Does it have reverse?
No
Maybe learn how to start a 2 stroke before making a video on it.
40 years of running them pretty easy to start one lmao 🤣
@@earlmoorhead5555 same here plus a lot of tools I use at work are 2 stroke. Preheating a brand new engine before starting helps. Also knowing which way choke is helps. A lot pulls with no fuel and oil on cold motor not a good thing. Knocking remote off and then picking it up to stand up again on table makes me question 40 yrs experience. Lay it down won’t tip over and fall. Good luck.
Real life experience are always shown here as ppl saying you have to pre heat ? I don’t agree with as that will depend on where you live and the weather conditions you run on ? Many factors to consider for sure I’ve never had a piece of equipment fail in my lifetime 🤷🏻♂️
It's not a damm nitro car. Lol just drive the damm thing at low rpms.
Lol 😂🐢🐢🐢🐢🐢🐢👍👍🔥🔥