You’re welcome. Thanks for watching. I think the canon website may provide a reset code. I’m not 100% sure though. Best of luck in the hunt. Please like and subscribe
Very helpful for removing the pads. I did actually wash mine. One thing you didn't mention is that the error message may not go away. Though I know people sell counter reset codes, we're first taking less risk with the temporary reset code from Epson. Hopefully, since our pads are clean, the reset will last longer.
I have an Epson xp530. My machine won’t work because it says it needs the service to do the pads and reset the code. I do want to try what you’ve just done, but how do I get the code?
Nice Video, i didnt know that printers have lifetime waste pads in it, after my printer show me the message. Before i took them out i watch your video, after that i first try the reset, i payed for my key 5,95 Euro to use the WicReset software, i got very fast the missing key for it. Now my Pads stay over night in water with some washing powder. By the way i forgot to put on gloves, my hands are now black. 🤣 For the software you need a USB cable, had to search for it, i knew i had one in my room here, iam glad i found it fast, the software dont work with ethernet.
I cannot remove ink cartridges prior to cleaning pads on my xp-310 because I can’t even get to the ink replacement option on my printer with the error message stuck. How does one do that and can you post a link to reset after cleaning pads? Any help would be greatly appreciated!
clean the pads ( and your hands if inky ) with car shampoo . Worked for me when in the ink jet service industry , wash the car and get that ink off too ;-) There appears to be no electrical connections to the pads so it must be just a timer thing for the warning message.
Sorry about the late response. Here is a cartridge replacement video on this very same printer: czcams.com/video/WDoEh0qgNYo/video.html Hope this helps. Thanks for watching. Please like and subscribe
Hilariously I am now going to open my Epson to find out where all the ink from repeated "nozzle cleaning programs" went!!!!!!!!!!!!!!! 15% ink used every time I did that like what in the FLYING FANDANGO
50 seconds into the video, you decide to tell everyone to remove the cartridges. That's like the captain of a plane flying 30 miles past the airport and then having a crack at landing in the ocean. 😅😅 Cmon man, how we noobs ever gonna stand a chance.
When you look up an instructional video online you watch it in full first to see if you are equipped for the task. You don’t just CZcams it, press play, and dive in full throttle without knowing the next turn. So where I mention about the pads is irrelevant. Just saying some people try to find the smallest thing to complain about. Another example, if you look up a recipe online, do you just start cooking while watching it for the first time and then blame the original chef for mentioning an ingredient you don’t have? Things in life aren’t this hard
you saved me from spending a large amount of cash. As a student who is broke I really needed this video!!
I’m glad I could help. Thanks for watching. Please like and subscribe
Thank you so much Sir, you saved our Christmas 2023!!! Greetings from Nuremberg, Frankonia, Bavaria, South Germany
Glad I could help. Thanks for watching. Please like and subscribe. Merry Christmas and greetings from Canada.
Great video. Never would have figured it out without you help.
Glad I could help. Thanks for the feedback and thanks for watching. Please like and subscribe
I am now drying my pads before reinstalling and will look into how to get a reset code. You probably saved me a load of money, thank you
You’re welcome. Thanks for watching. I think the canon website may provide a reset code. I’m not 100% sure though. Best of luck in the hunt. Please like and subscribe
A brilliant video, thank you, Simon from England.
Hello Simon. Thanks for watching. Glad you found the video helpful. Greetings for Ontario Canada. Please like and subscribe
Thanks, Bill. Very useful video. I'll do mine tomorrow.
Excellent. Glad you found it helpful. Thanks for watching. Please like and subscribe
Very helpful for removing the pads. I did actually wash mine.
One thing you didn't mention is that the error message may not go away.
Though I know people sell counter reset codes, we're first taking less risk with the temporary reset code from Epson. Hopefully, since our pads are clean, the reset will last longer.
Thanks for the tip. Hope the code does good for you. Please like and subscribe
Does anyone know where I can purchase the pads, and, the reset code kit (U.S.)?
I have an Epson xp530. My machine won’t work because it says it needs the service to do the pads and reset the code.
I do want to try what you’ve just done, but how do I get the code?
Once i have replaced the Ink Pads what do i do then to resett the printer please. Its all flashing lights still?????
👍Thanks a lot for your helpful video!!
You’re welcome. Thanks for watching. Please like and subscribe
Nice Video, i didnt know that printers have lifetime waste pads in it, after my printer show me the message. Before i took them out i watch your video, after that i first try the reset, i payed for my key 5,95 Euro to use the WicReset software, i got very fast the missing key for it. Now my Pads stay over night in water with some washing powder.
By the way i forgot to put on gloves, my hands are now black. 🤣
For the software you need a USB cable, had to search for it, i knew i had one in my room here, iam glad i found it fast, the software dont work with ethernet.
Thank you so much I’ll will be doing this 1st in the morning. The locals depend on my brother at my barber shop.
You’re very welcome. Always glad to hear from the hard working viewers and DIYers. Thanks for watching. Please like and subscribe
I cannot remove ink cartridges prior to cleaning pads on my xp-310 because I can’t even get to the ink replacement option on my printer with the error message stuck. How does one do that and can you post a link to reset after cleaning pads? Any help would be greatly appreciated!
Where is the panel on an XP540?
Do you have an image of where it is on an xp960 I cant seem to get it off so easily as you have ??
Unfortunately I no longer have this printer. So what you see in the video is all I can provide
Thank you man
You're welcome. Thanks for watching. Please like and subscribe
clean the pads ( and your hands if inky ) with car shampoo . Worked for me when in the ink jet service industry , wash the car and get that ink off too ;-)
There appears to be no electrical connections to the pads so it must be just a timer thing for the warning message.
Hi Guys I really need help with my printer .. I clean ink pads I put back and still not work my printer what must to do !? .😢
best xp video thanks
Thanks for watching. Glad you enjoyed it. Please like and subscribe
Ty soooooo much!
You’re welcome. Thanks for watching. Please like and subscribe
How do you take the cartridge out before cleaning the ink pads
Sorry about the late response. Here is a cartridge replacement video on this very same printer:
czcams.com/video/WDoEh0qgNYo/video.html
Hope this helps. Thanks for watching. Please like and subscribe
Any know how reset the waste ink counter xp-442 ?
think I saw that you need to go to Epson to "reset" it...... it is a software fix
That's so easy!!
Glad to hear it. Thanks for watching. Please like and subscribe
This process doesn’t work on an XP-600. It is quite a bit more involved.
Thanks for the tip. Please like and subscribe
Unfortunately the ink cartridges don’t move towards centre for removal when E-11 is showing 🤷🏻♀️
That’s no good. Thanks for the info.
where do you buy parts?
Amazon has some printer parts but in most cases the cost is better to just buy a new printer.
Hilariously I am now going to open my Epson to find out where all the ink from repeated "nozzle cleaning programs" went!!!!!!!!!!!!!!!
15% ink used every time I did that like what in the FLYING FANDANGO
Mine are black... like, im putting them under water, and they aren't turning white.
Use rubbing alcohol. Hope this helps. Thanks for watching. Please like and subscribe
I have the software. To reset the ink pad.
Could you please share the specifics on that and where to get it? Thanks for sharing. Please like and subscribe
Hi Jian Could you share the Waste Chip Resetter software,please?
XP-7100 looks much different!!!! Therefore this doesn't apply to ALL XP's.
Ok I’ll keep that in mind. Thanks for watching
I have an xp -830 and this video is NO good
Thanks for the feedback
50 seconds into the video, you decide to tell everyone to remove the cartridges. That's like the captain of a plane flying 30 miles past the airport and then having a crack at landing in the ocean. 😅😅 Cmon man, how we noobs ever gonna stand a chance.
When you look up an instructional video online you watch it in full first to see if you are equipped for the task. You don’t just CZcams it, press play, and dive in full throttle without knowing the next turn. So where I mention about the pads is irrelevant. Just saying some people try to find the smallest thing to complain about. Another example, if you look up a recipe online, do you just start cooking while watching it for the first time and then blame the original chef for mentioning an ingredient you don’t have? Things in life aren’t this hard