Hi, can I please tell me what the reference of this engine is? Continuation of great videos. They are perfect, I have learned a lot from their videos. Thank you very much A hug from Portugal
Thank you for this great video. You should be a member of the Parkside repair team ! However, I would like to ask you if you have any information about the hammer mechanism inside the rotor at 10:32. The hammer should be held inside by a cir-clip. This cir-clip was broken, the parts were thrown out of the tube at disassembly and I don't know how to re-assemble them. Iam not very sure if I have all of the parts. Is there any info available ?
Hello ! My selector button got stuck on the percussion and I can't move it on drilling. Do you have any idea what caused this and how I can fix it? Sorry for my poor English. Happy New Year !
@@zana3587 17:21 but I discovered the defect, the selector button pin got stuck in the hole at the end of the stroke in the housing. I helped him get up with a thin blade, I polished a little the vertical walls of the two holes corresponding to the two positions and I applied grease.
hello, I need help, I have the same drill and the largest gear you show in the video at 10:25 has come off, is it possible to find the abbreviation of that gear to be able to replace it? You would do me a huge favor, thank you.
After welding that bearing, the vaseline is fucked up. I haven't seen you to put another one. And I can't imagine how could you do it after closing the bearing completely.
This part in minute 13, does it compress air, with the welted rod hitting in axial direction. Is this device a pneumatic drill? Sadly You don't talk much explaining a bit the principles of some parts. Thanks for Your videos.
Hello Dahen (is it Your name?) and Merry Christmas from Poland. I've been watching Your chanel since about half a year and I'm impressed. Thanks. Parkside as a Lidl's brand is sold in my country too. I have many tools with this sticker because they are relatively cheap. Some of it are not bad, some are crap. Most of them is on three years of guarntie (premium, black line, called Performance - five). BUT in some cases the better choice is to fix them themselves. Why? Because they don't fix them but change for another one, usualy finaly worthless as the previous one. And so on, many times. And possibility to watch yours ways of repair is, in many cases very usefull. In fact, Lidl should hire You as their service. Then they'd have a better reputation. But You have only two hands and You live far away :) OK thanks a lot again. And Got bless You and Your family.
السلام عليكم أخي، شكرا على الفيديو التوضيحي المفصل مع دقة العمل : czcams.com/video/u_gHc2eW8wo/video.html أملك نفس الآلة لكن تكسر فيها المسنن الكبير ذو 52 سن، هل يمكنك أن ترسله لي إلى الجزائر؟ أو ترسل لي رابط شرائه على الأنترنت، مع كل الشكر و التقدير
Nobody can understand whats broken and what it should do without special knowledge over the working principle. So your videos are pretty much useless if you want to teach something alongside.
Thanks ! The only video I found that helped me open Parkside pbha 12 a1
Hey, Merry Christmas!!! A great hug from a big fan from Brazil.. :)
Merry Christmas sir. thank for all brazil's people
Hello dear teacher, I would like to express my gratitude and thanks for your informative videos🙏🙏🙏🌹
Fantastic. As usual.
I wish you a Happy and Prosperous Year 2021.
Thank you
Fantástico.
Como siempre.
Les deseo un feliz y próspero año 2021. Gracias
Merry Christmas
thank you sir
Feliz Navidad
Excelente, parabéns e obrigado pela partilha
all the other parkside tools. "Hang on brother, we are here to save you!" :))
Hi, can I please tell me what the reference of this engine is? Continuation of great videos. They are perfect, I have learned a lot from their videos. Thank you very much
A hug from Portugal
Parkside=best buy tool for that price... nice video
thank you sir
Good job
Happy new year 🎈
Thank you sir and happy new year
Why not showing the working principle by starting the opened machine slowly?
Гарна робота Відновили інструмент
Дякую вам сер
je suis en admirations bravo 👏👏👏
Merci Monsieur
Please help me, is this engine a 555 or 795? thanks
Отличный ремонт!! Хотя, вместо сварки можно было применить пайку латунью. Но и так отлично вышло!!
спасибо сэр, но у меня нет
What kind of motor is in this machine? any markings?
Good hummer or not? I can buy and benefit that for me?
Thank you for this great video. You should be a member of the Parkside repair team !
However, I would like to ask you if you have any information about the hammer mechanism inside the rotor at 10:32. The hammer should be held inside by a cir-clip. This cir-clip was broken, the parts were thrown out of the tube at disassembly and I don't know how to re-assemble them. Iam not very sure if I have all of the parts. Is there any info available ?
Hey Dahen, which Grease do you use? Thanks you
any kind but good quality
ممتاز جدا.. شكرا لك
اشكرك اخى العزيز
I have the same drill. What grease did you use? Have a nice Day.
any kind but good quality
Hello !
My selector button got stuck on the percussion and I can't move it
on drilling. Do you have any idea what caused this and how I can fix it?
Sorry for my poor English.
Happy New Year !
can you show me in time bar what you mean
@@zana3587 17:21 but I discovered the defect, the selector button pin got stuck in the hole at the end of the stroke in the housing. I helped him get up with a thin blade, I polished a little the vertical walls of the two holes corresponding to the two positions and I applied grease.
great work as always
Thank you sir
جيد جدا انت مبدع استمر 🌷🌷🌷🌷🌷
دەستەكانت خوش بى
زور بةريزي
hello, I need help, I have the same drill and the largest gear you show in the video at 10:25 has come off, is it possible to find the abbreviation of that gear to be able to replace it?
You would do me a huge favor, thank you.
no idea sorry sir
Hi Dahen, Do you know where could I find the big gear? Mine is broken and I can´t find a supplier.
no, sorry
Yeah..🙌..Sir ❤👍
Thank you sir
Wonderful repair skills . My brother
Thank you my teacher and my brother
Your welcome my dear brother.
After welding that bearing, the vaseline is fucked up.
I haven't seen you to put another one.
And I can't imagine how could you do it after closing the bearing completely.
فديو ممتع أحسنت العمل أستاذي العزيز
اشكرك اخى العزيز
Hi. Bro. Excuse me are you understand Persian language?
Top!
Thank you sir
This part in minute 13, does it compress air, with the welted rod hitting in axial direction. Is this device a pneumatic drill? Sadly You don't talk much explaining a bit the principles of some parts. Thanks for Your videos.
thank you sir, yes compress air
ما شاء الله خبرة
اشكرك اخى العزيز
you should buy tig welding device, it would be more easy ti weld small parts
Super👍Sir
Thank you sir
Great videos mate
Are you on the parkside tools group?
thank you sir
no sir
@@zana3587 please join the group and share the videos you make
@@zana3587 facebook.com/groups/238128800407298/?ref=share
Thank you . My face book is ... fix at home....
is it made from hardened steel?
i don't think so
Hello Dahen (is it Your name?) and Merry Christmas from Poland.
I've been watching Your chanel since about half a year and I'm impressed. Thanks. Parkside as a Lidl's brand is sold in my country too. I have many tools with this sticker because they are relatively cheap. Some of it are not bad, some are crap. Most of them is on three years of guarntie (premium, black line, called Performance - five). BUT in some cases the better choice is to fix them themselves. Why? Because they don't fix them but change for another one, usualy finaly worthless as the previous one. And so on, many times. And possibility to watch yours ways of repair is, in many cases very usefull.
In fact, Lidl should hire You as their service. Then they'd have a better reputation. But You have only two hands and You live far away :)
OK thanks a lot again. And Got bless You and Your family.
thank you sir, you alright, God bless You and Your family too
Merry Christmas for all Scotland's people
أهلا. من أين تحصل على معدات parkside؟
من سوق الجمعة
hogy szétvitte a vályog téglát !
8:53 ممكن فيديو عن كيف صنعت هذه القطعة المهمة
ليس لدى فيدو ولكن سهل الصنع
Wer das Lager mit der Kugellaufbahn verschweißt, und die Härte, es ist zerrissen, wie viel kostet neue
Ich mag es zu reparieren
great
thank you sir
احسنت
اشكرك اخى
Buy a Tig or a MIG, I don't know how you manage with a stick welder for small jobs
if i have mig or tig i used it, but this is available for me now
Or a co2 bottle and a hose xD
Bonjour peut-on acheter la pièce que vous avez soudé ? , merci
je ne pense pas
@@zana3587 merci de votre aimabilité
Echt geil...Hut ab
Danke mein Herr
nice
Thank you sir
Why fix when they only cost £20 brand new?
it's not about money, science
Lux robota
!
Using parkside tools to repair parkside tools
yes sir
top
thank you sir
🌷🌷🌷🌷
thank you sir
fANTASTIC
THANK YOU VERY MUCH
и всё таки поставить новую деталь предпочтительней
да сэр
Сделать и продать )))
Good job
I have this drill also but i dont have the battery
Thank you sir
This is not brushless motor
No sir
Gut👍
danke Bruder
متاز
:D
thank you
Ehe ich das hinbekomme, kaufe ich mir ein neues Gerät und habe 3 Jahre Garantie.
gute Arbeit
السلام عليكم أخي، شكرا على الفيديو التوضيحي المفصل مع دقة العمل : czcams.com/video/u_gHc2eW8wo/video.html
أملك نفس الآلة لكن تكسر فيها المسنن الكبير ذو 52 سن، هل يمكنك أن ترسله لي إلى الجزائر؟ أو ترسل لي رابط شرائه على الأنترنت، مع كل الشكر و التقدير
What a bad industry parkside ..i purchase all products
yes not good quality
Nobody can understand whats broken and what it should do without special knowledge over the working principle. So your videos are pretty much useless if you want to teach something alongside.