I was asked to pick 5 guns recently and I went with pretty much some of the same stuff for the same reasons. I included my cmmg 22 lr conversion for my AR. There's more 5.56 than any other center fire round in north America, an there's 6 million 22lr rounds produced in this country every year. Just the AR and 22 LR conversion alone gives you the ability to tap into a huge resource. Like you said my glocks cover 9x19, 40 SW, 357 sig, 45 gap, and 22 lr all on one frame with dif parts. Both those platforms are great choices. With 12 ga you get the ability handload all kinds of crap, plus all the subcal adapters (conversion cartridges) on the market for pistol calls and other smaller bore shot shells.
I was going to comment after the vid, but I had to stop and comment after seeing your marine magnum. Mine has run flawlessly. Love the video concept man, hopefully this trend picks up and we see a lot more. Thanks for sharing! God bless.
Good video, I couldn't go lower than five they'd be used for all both situations you referenced, I'm in MT. Springfield XD 10mm pistol for personal defense & back up when hunting, Springfield 300 blackout AR, upgraded Kel Tec KSG shotty holds 23 assorted mini shells, POF 308/6.5 Creedmoor AR, Sig Cross 6.5 Creedmoor hunting rifle. I'd hate loosing my Deagles, and too many guns that nobody needs to know about.
Rewatched one of your older vids on .458socom vs .450 bushmaster vs .50 beowulf and was curious what spring/buffer setup you recommend for those heavier round rifles in an a1/a2 style receiver extension? Keep hearing different things so figured would ask what you think since you appeared to have 3 working ones in similiar configuration. Mine is gonna be a 16inch mid length gas, .450 bushy with a brake that should eliminate at least a 1/4 to a 1/3 of recoil impulse even if I dont think it will take out the full 40% some claim, so unsure if need to go super heavy since should tame it down to around the same recoil impulse poundage as .308 generates. Had thought about trying an ar10 buffer with a spacer since people reccomend h3 buffers in carbine length and is about the same weight but with longer travel in an a1 extension,and would rather avoid getting into an adjustable gas system on it if I can to save a few bucks to have more money for things like tags for bucks and probably beers :) Any thoughts on the matter would be appreciated 👍
Hi no sure if you saw my reply to you on that video but if not, I have a standard A1/A2 buffer and spring in all of those rifles. I will say that my 450 has some pretty good recoil similar to a 16" AR10 in 308.
Subscribed…..AND I ONLY READ THE VIDEOS TITLED ON YOUR HOMEPAGE, NO BULLS@!T, TO THE POINT, ETC. 👍🏻👍🏻👍🏻 ILL START WATCHING AND MAKE SURE NO CLICKBAIT, IM SOOOO SICK OF THAT, ALONG WITH WASTING MY VALUABLE TIME. THANKS
Custom p80s better than glock and ATF can’t create laws. I wish everyone would stop fear mongering each other over that bs. Is ThAt A sBr? Do YoU hAvE a StAmP fOr ThAt?
I was asked to pick 5 guns recently and I went with pretty much some of the same stuff for the same reasons. I included my cmmg 22 lr conversion for my AR. There's more 5.56 than any other center fire round in north America, an there's 6 million 22lr rounds produced in this country every year. Just the AR and 22 LR conversion alone gives you the ability to tap into a huge resource. Like you said my glocks cover 9x19, 40 SW, 357 sig, 45 gap, and 22 lr all on one frame with dif parts. Both those platforms are great choices. With 12 ga you get the ability handload all kinds of crap, plus all the subcal adapters (conversion cartridges) on the market for pistol calls and other smaller bore shot shells.
Nice! If I had of add 2 more it would be my 10/22 and my 308 that I showed at the end.
Appreciate your takes and chosen firearms in regards to different scenarios...
God bless brother
I appreciate you watching! Thanks!
Good vid. Solid arguments for your choices. Stay safe 👍🏻🤙🏻🇺🇸
This Video was amazing Bro I like your selections especially the Tavor 12…. Also that Remington 870 looks amazing and durable
Thanks!!
I was going to comment after the vid, but I had to stop and comment after seeing your marine magnum. Mine has run flawlessly.
Love the video concept man, hopefully this trend picks up and we see a lot more.
Thanks for sharing! God bless.
Thanks for checking it out.
Good video, I couldn't go lower than five they'd be used for all both situations you referenced, I'm in MT. Springfield XD 10mm pistol for personal defense & back up when hunting, Springfield 300 blackout AR, upgraded Kel Tec KSG shotty holds 23 assorted mini shells, POF 308/6.5 Creedmoor AR, Sig Cross 6.5 Creedmoor hunting rifle. I'd hate loosing my Deagles, and too many guns that nobody needs to know about.
If where to add 2 more it would be a 10/22, and my 308 for long range, the one I showed at the end.
Good video man, interesting choices.
Rewatched one of your older vids on .458socom vs .450 bushmaster vs .50 beowulf and was curious what spring/buffer setup you recommend for those heavier round rifles in an a1/a2 style receiver extension?
Keep hearing different things so figured would ask what you think since you appeared to have 3 working ones in similiar configuration.
Mine is gonna be a 16inch mid length gas, .450 bushy with a brake that should eliminate at least a 1/4 to a 1/3 of recoil impulse even if I dont think it will take out the full 40% some claim, so unsure if need to go super heavy since should tame it down to around the same recoil impulse poundage as
.308 generates. Had thought about trying an ar10 buffer with a spacer since people reccomend h3 buffers in carbine length and is about the same weight but with longer travel in an a1 extension,and would rather avoid getting into an adjustable gas system on it if I can to save a few bucks to have more money for things like tags for bucks and probably beers :)
Any thoughts on the matter would be appreciated 👍
Hi no sure if you saw my reply to you on that video but if not, I have a standard A1/A2 buffer and spring in all of those rifles. I will say that my 450 has some pretty good recoil similar to a 16" AR10 in 308.
Good Video. 9mm, 5.56 and 12
Great video brotha! I subscribed! I’m going to do something similar soon.
Enjoyed the vid - thanks
Thank you!
EXCELLENT CONTENT 🎉
Random comment for your YT stats. Good vid.
Thanks!
Subscribed…..AND I ONLY READ THE VIDEOS TITLED ON YOUR HOMEPAGE, NO BULLS@!T, TO THE POINT, ETC. 👍🏻👍🏻👍🏻
ILL START WATCHING AND MAKE SURE NO CLICKBAIT, IM SOOOO SICK OF THAT, ALONG WITH WASTING MY VALUABLE TIME. THANKS
Thanks I appreciate it! I haven’t put out any videos in a while but I'll be doing some here and there in the future.
SHTF is coming
Right you are! I just hope when it come it's not an overnight chaos even.
Custom p80s better than glock and ATF can’t create laws. I wish everyone would stop fear mongering each other over that bs. Is ThAt A sBr? Do YoU hAvE a StAmP fOr ThAt?
Cool video!