2008 GMC Yukon Keyless Remote Programing
Vložit
- čas přidán 4. 11. 2016
- Concerned with buying aftermarket remotes to replace your factory keys? Don't be. This video shows you how you program new remotes for your GMC Yukon or Chevrolet Tahoe.
Factory Chevy Tahoe Keyless Entry Remote: www.gmpartsclub.com/gmc/yukon-...
Factory Chevy Tahoe Remote Start Upgrade: www.gmpartsclub.com/remote-sta... - Auta a dopravní prostředky
thankkkkkk you....I bought 2 fobs off amazon...I read some reviews ...they were saying the crank start didn't work...don't know what they did wrong both of my remotes work...and I programmed them both 20 seconds... mine actually locked the doors after programmed thanks dude 👍
just got ours in the mail last night, kept reading everywhere about having to take it to the dealer or locksmith. but thanks to you, I can do it at home! thanks!!
Thank you, your video was the quickest easiest to undeartand. I loved the easy step-by-step hand holding. Thanks!
This helped greatly, you are correct there was no chime after 15 seconds, I programmed 3 keyes and all of them work. Thank you.
Thank you for posting this, i had watched the video the company who made my remotes recommended and it only showed me how to program one fob and i wasn't able to ever program a 2nd fob or any additional ones once i programmed one it deleted all the others so now only the one would work and i tried to program different ones only ever getting one or the other to work never more than one...
Thank you so much I watch your video and program my remote even though my DIC is not working 👍👍
Thank you for sharing this video, very useful.
I ordered one on Amazon it will be here monday thank you for explaining how to program it fast and easy thank you do much
Did it work?
Quick question I use the refresh arrow and it turn on but after a 5 seconds it turns off? Is that normal
Thank you for your video!!!
What if I do the steps you say-- and it beeps like it has reprogrammed and it still doesnt work... I had the remotes them self checked and they said they were fine
Will these work on a 2014 Arcadia. I tried and it would not work
I can get them both to program, but once I Program the other one the first one doesn’t work. Help!
I got it programmed easily enough and it works for my locks but when I tried to use the remote start, wouldn’t work and drained my battery when I was trying to use it! My Yukon won’t start now even with jumper cables on it.
Have you tried changing the buttons and cleaning it with alcohol ???
my lift driver side lock/unlock not functioning, used the passenger's side not getting positive result, i enter the programing mode but the remote not programed, i changed the battery too, nothing happened
mi carro ez un suburban 2014 y no se como hacerlo
2011 Z71 Tahoe and that relearn option is not an available option. Weird.
I have GMC Acadia 2011. in the menu there is no learning function for the remote control. How do i set up a new remote control?
this feature was available from 07-10 vehicles.11-14 vehicles, has to be programmed at the stealership. I have the same problem with my Yukon
So easy thanks
You need to program all remotes in the same session. If you turn off, and turn on to program another remote, all other remotes are deactivated.
Thank you!
Yeah, engine light is on. It will not activate if the engine light is on your remote start, will not activate you have to have a code reader, the club, that cold.
When I go through the process mine doesn't go to the "Remote key learning active" screen. When I click the select button on the "press to relearn remote key" screen it just stays on that screen.
Any ideas?
Did u evee figure this out
My 2011 GMC Yukon did not give me the option. Remote Key what should I do
Same on my 2011 gmc sierra 😏
Same
I cant program 2 remotes. 1 will not work the only way they work is if the 2 remotes are far away from each other. Once they are close one will stop
What kind of radio screen do you have
This was a favor I did for a family friend, I'm not sure.
Works
The reason your remote start will not work is because you have a yellow engine check light on clear the engine check light and the remote start will work
How do you clear the check engine light
Catherine Gray 🤦♂️ go to a mechanic 🤦♂️
I tried mine and it killed my battery!
I did it the first time and it worked perfectly, but after a minute I try the key fob once again and it didn’t work. Can someone help me?
Hmm, I have no answer why it worked and then stopped working.
Mine did not work I've been tryin for 30 mins now
I believe the remote start only works outside the vehicle. If it Senses the remote inside, it won't start.
Mine does not day relearn active it just flashes any ideas?
Did you get this figured out?
and you have to hit lock once before remote start will start
Did your remote start work after you programmed the new fob? The door locks work fine but when I went to use the remote start, it drained my battery!
Thank Yhuuuuu I Fixed Remote Start ! 👌🏿💯
AngeelBaaby how ? ... I'm beginning to think mine didn't come with that option
Easy Peezy Thanks
Quien tiene una Yukon 2008 ??? Que puedan ayudar
Yo
Remote start doesn't work because the check engine light is on.
there's a possibility that the remote start didn't work because the key was in the ignition
& could be due to the yellow lamp (service engine soon) if it is ON
Gm cars don't let keyless entry work while running the ones with an alarm such as this one
Morgan Buroran : hi, how do i change the run time on a 2015 GMC factory remote start so it runs longer than 10 minutes?
Morgan Buroran : hi, how do i change the run time on a 2015 GMC factory remote start so it runs longer than 10 minutes?
Remote start work with out key on position 🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
Your remote start didn’t work because your check engine light is on.
Chevyboi88 Jones the check engine light is always on if you cycle over without fully cranking the ignition on just for future reference
He said the lights flashed when he tried to start ,that happens when there’s a stored cel thanks tho
Your key was in the ignition... That's why remote start didn't work
Yes and he had to lock doors first with remote and key of ignition then hit the turn on button
Mine didn't work at all & i don't have any lights, it jush flahes the lights but thr car won't Star at all!!
Nice try, but when it comes to remote start you tube won't let you do it for free.
MAJESTIC AUTOMOTIVE so are you saying remote start cannot be programmed at home?
@@firefly0203 if you have a GM MDI and a subscription to GM TIS to Web then yes, you can do it at home, you need to program the remotes in a different way since remote start is link to the immobilizer module. if truck/car is not equipped with remote start then, you sure can do it at home through the instrument cluster.
I have a 2012 GMC Yukon and I cannot find the relearn screen. What the heck!
Manufactures have been slowly removing self- programming features.