Analysis of Infineon XDPS2201 170W Charger Prototype
Vložit
- čas přidán 8. 07. 2024
- If you wanna buy the tester of POWER-Z, you can visit our Amazon store:
www.amazon.com/s?me=A31UM8SRX...
Introduction
---------------------------------------------------------------
ChargerLAB got an XDPS2201 170W charger prototype from Infineon. It adopts a simple design of single-stage hybrid-flyback topology for 24V to 36V Li-Ion battery packs.The synchronous rectification makes the system efficiency can be up to 95% under 230V AC when fully loaded.
Bill of materials (BOM)
------------------------------------------
Input Filtering Circuit:
Varistor: 10D561K
Safety X2 Capacitor: TDK
Bridge Rectifier: Onsemi GBU8K
Electrolytic Capacitor: Rubycon
Primary Circuit:
Master Control Chip: Infineon XDPSS2201
MOSFET: IPA60R280P7S
Filter Capacitor: WE
Optocoupler: VOL618A
Synchronous Rectification Circuit:
Synchronous Rectifier Controller: MPS MP6951
Synchronous Rectifier: Infineon BSC160N15NS5
Output Filtering Circuit:
Electrolytic Capacitor: KEMET, Rubycon
Op-Amp: TI TLV9102
Auxiliary Circuit:
Auxiliary Master Control Chip: Infineon CE5AR4770AG
Electrolytic Capacitor: Würth
Optocoupler: VOL618A
SMD Solid Capacitor: Würth
Chapter
----------------------------------
0:00 Intro
0:50 Test
1:00 Teardown
2:20 Analysis
8:04 Summary
For more details. You can visit our website: www.chargerlab.com
For Business Inquiries: info@chargerlab.com
SOCIALS:
Instagram: / chargerlabs
Facebook: / chargerlab
Twitter: / chargerlab
Telegram: t.me/ChargerLABchannel - Věda a technologie
Top quality 🎉
I love your voice!
Could you measure the power factor at full load ?
Nice
Could You please analyse a 100W pd powerbank with circuit diagrams