If any one ask about do u have a wrench? Pathetic I have of plenty of tools more than you have trust me was not home and I had time to post this help people out and edit I have other videos with plenty of tools I don’t make money off CZcams or nothing stop asking that stupid questions if u got something negative don’t comment
Thanks for the video. My daughter came home today telling me her 2016 Hyundai Elantra turn signal was blinking fast. I was going to go to the store and buy some bulbs but then I found your video. Took off the housing. Gently pry up the connectors with a tiny screwdriver. Put the bulb back in and it works fine.
At first I didn’t believe the solution was this simple because I have been trying to figure this out for months, but this was actually my problem. Pulled the connector out alittle bit and put some bulb grease in there and everything was working as normal. Thank you so much
Thank you so much! I faced this problem yesterday, thought I needed to take the car to a mechanic. Came across your video and I fixed it myself, following the steps closely. Very informative and useful, thanks!
I just replaced both bulbs and was scratching my head as to why they were still hyper flashing. Two tugs on each spring and bam! Good to go, thanks man!
Thanks for the video. My sister's 2013 Elantra had the same problem. I told her to take it to a mechanic because he'd have to remove the bumper cover to get the headlight off. Then I watched your video and got it fixed (without having to remove the bumper cover!) Oh, and don't worry about the "no wrench" jokes from your viewers. They (and I) know where to come for answers.
The front 2 screws are 10mm, and the rear one is 12mm. In order not to hit that little piece, remove the clip. You may not have to remove the headlight if you have an angled small pair of pliers. Great video help!
Thank you for sharing. I replaced my turn signal bulb without removing the entire light housing. It is easy to get to, you just unscrew it and it pops right out. I cleaned it and replaced the bulb, all is working perfectly as it should.
Thank you for the video! I have a 2013 Hyundai Elantra & your solution was 100% accurate & solved our problem. We took the car numerous times to a mechanic because the same bulb kept acting up, & their solution was replacing the bulb which only worked for a couple of months at best. I am not the handiest guy & desperation drove me to your video which allowed me to permanently fix the problem in less than 10 minutes. Thank you very much!
This just worked like magic! I was thinking about how much it would cost me if I took my car to a repair workshop. I did the exact thing as shown on the video and my turn signal started working normal. Thanks for you video!
Been struggling with this for weeks since I changed my bulb. Just got in from screwing around with it and found your video. It’s dark out and I’m going to try this in the morning. Thank you!!!
Thanks so much!! This solved our problem too. I was stumped cause we replaced the bulbs with new bulbs and had good voltage at the wiring harness,and still couldn’t get it working. I found your video and did what you said and now have working turn signal lights. Needed it fixed for vehicle inspection. Thanks for your help!! I also subscribed 👍
Everett, thanks a lot for the video. It worked like a charm! I was able to remove and replace the bulb holder without removing the headlight assembly as well but removing the headlight assembly wasn't too complicated or labor intensive either. Thanks again and keep up the good work! By the way Everett is a cool name!
You saved my life. I followed your instruction, and its working like a champ now. I was planning to buy a new bulb for this. You saved me time and money. It took me approximately 15 mins... Thank you very much
Hey, thanks buddy! I didn't think it was going to work because the contacts shouldn't loosen up that much, and they looked good when I popped out the bulb. I used a tiny screwdriver to bend them up a bit. Now, good to go!
MAN, THIS 100% WORK, I CHANGED THE LIGHT BULB AND IT WAS STILL HYPERFLASHING, I WAS JUST ABOUT TO SEND THE CAR TO A MECHANIC WHEN I CAME ACROSS THIS VIDEO. I DID EXACTLY WHAT YOU DID AND IT WORKED!......YOU SHOULD CHANGE THE TITLE, PUT SOMETHING LIKE "HYPERFLASHING AND LIGHT IN GOOD CONDITIONS". ANYWAYS, THANKS A LOT MAN!
On mine i switched the left to right left was messing up and right good it work for one day and then it kept blinking rapidly ..but I gonna give it a try to this new truck you’re showing ..might save $hundreds
Just came upon your video. My daughters car is having the same issue on her 2012 Elentra. I had replaced the bulb, then I week later started flashing quickly. It was driven me crazy. I will get back to you once I do it. Luckily it’s on the passenger side. Much easier to reach. By the way if you take fuse box cover off, you can reach turn signal.
2014 elantra GT ... don't need to remove the assembly - can access the bulb fairly easily just find the correct 'cap' ... cleaned /sprung the contacts and all good. thanks
Wow Yes thank you so much!! It was exactly my problem and it took 3 seconds to fix! Ps: dont need to take out the entire headlight to take out the bulb ;)
Did this in 10 min rn if you have common sense you can do it just gotta pop out those two metal pieces out little more then it will go out the erratic light great videos about from Hawaii🤙🏻
Awesome, thanks for this video. It doesn't show the specific problem I was having but I can try to see if this fixes it when I get some tools to take the headlight out. Unfortunately I have a feeling the problem might be a bigger issue however as this morning when I got into my car to leave work the headlight was working normally, but when I went out later in the evening to go get my check from one of my jobs and to doordash the issue came back. Funny enough though halfway through the time I went doordashing the issue resolved itself again.
Yes when u pull those two springs towards you than put the bulb back in that should solve it and u won’t have that issue anymore same thing was happening with me try it good luck thank u
It should solve the problem if it does not u might want buy the whole clip and change it out but for me it has fixed issues just make sure u do it right make sure it hold firmly good luck 👍
Any suggestions/ help i have a 2015 hyuandai sonata replaced signal ights they both work without the headlight being on but when turning them on both signal come on but with not flash
My 2013 was at the dealer for a month because of this issue and window washer fluid not coming out. I was told it's the BCM so luckily it was covered under warranty and that still didn't fix the issue. So they said the wires had corrosion on them and cleaned them and then magical it worked well so I thought .Picked the car up yesterday and the turn signal on driver side worked hot home and it's acting crazy and will eventually stop working again ..
hyundai sonata yf 2010. My driver's side turn signal is flashing rapidly. All bulbs are bright. I changed the light bulb but it still blinks fast. Can you help me where the fuse and turn signal relay are located? thank you very much.
Wow..man ! You are the man,but on witch model you did this? Basicly you don't have to remove the headlight completly:))) And what about if the bulb just burned out ?
U know the medal inside of socket that hold the bulb or give power to the bulb those medals pull them towards u so they can hold the bulb firmly it’s a mess with those lights got rid of the car
Hi I have Hyundai Elentra 2008 1.6 my car problem blinking light D,2,3 L and epc some time hand break what is problem please tell me I’m waiting for your reply
I have 2012 Hyundai Elantra. The rear turn signal on the left side works but there is no flashing light at the left front outside the car. The left green flash light flashing very fast on the dashboard inside the car. This happens right after replacing Steering Coupler. Is it possible the replacement mess up the left flashing light?
Hi i dont know if you respond butt i have a hyundai elantra 2013, everytime i turn on the headlight the turn signal is on the dashboard and frozen. Like it would just be on and im not signaling to turn, its not flashing but the light is frozen 🤷🏽♂️
No but weird thing is i switched the bulb from the driver side to the passenger side and havent had an issue yet but i did replace the socket at first when that didnt work i got the factory bulbs thats didnt work so i switched them around and it worked .also there arnt to many how to videos for are cars on line so the 2014 and the 2016 are near exact when fixing issues keep posting fix videos on line cuz i will definitly watch them buddy i currently when i drive fast around corners and hit a bump my rear end will jurk hard almost lost control on the freeway going 65 around a bin wasnt driving irrate just doing the speed limit but the back dont have sway bar links
@@everetthobbies2062 at first i used a light stick and i tested my connection to male sure power was going to it and there was so i found it odd that id get hyper flash with headlights off but with them on it wouldnt work tho i did do as you said with both sockets to make sure i have good connection to the bulb but when that didnt work i switched them around and they work good now so thanks for posting
I have the same problem but on both sides. Also one of them stays solid when I turn on the parking/headlights, I tried tugging on the springs and it didn't work for me. The light that was stuck on I put on the opposite side and the problem followed. I think it may be the socket itself. I ordered two from the dealer to see what happens since they are not that expensive. Hopefully, this will do it. Did you unhook your battery? and if so did that work?
I cant believe you cant just unscrew and screw the bulb in I've never owned a car you had to take the thing apart to change the bulb. What a ridiculous design
It’s tight to get your hands in there to loosen the bulb, luckily my young son was with me and I pointed out where the bulb was and his smaller hands he was able to get the bulb out for me. The driver side is harder to get to than the passenger side. You might be able to reach it with long needle nose pliers to loosen it 1st.
I had this problem we bent the tabs up a bit on the outside and inside of the socket piece and it worked for the trip to the store and back then to my friends house the next day. On the way to my car i noticed the drivers side front flasher stopped working again (perfect timing being midnight on a holiday weekend with 1000 cops out). I took all the back streets home to avoid any unwanted attention and then half way home it started working again. Still not sure whats causing it but dont have the money to get it in to the shop right this minute anyone have any idea ill check fuses when i get up.
If any one ask about do u have a wrench? Pathetic I have of plenty of tools more than you have trust me was not home and I had time to post this help people out and edit I have other videos with plenty of tools I don’t make money off CZcams or nothing stop asking that stupid questions if u got something negative don’t comment
Facts ppl always have some to say. If it ain’t something positive don’t even post it
Thanks for the video. My daughter came home today telling me her 2016 Hyundai Elantra turn signal was blinking fast. I was going to go to the store and buy some bulbs but then I found your video. Took off the housing. Gently pry up the connectors with a tiny screwdriver. Put the bulb back in and it works fine.
You are welcome 🙏
At first I didn’t believe the solution was this simple because I have been trying to figure this out for months, but this was actually my problem. Pulled the connector out alittle bit and put some bulb grease in there and everything was working as normal. Thank you so much
This video just saved me a trip to the mechanic and probably a couple hundred dollars. Thank you so much!
You are welcome
The service center said I needed to replace the entire harness. You saved me over $600 with this tip. Thank you!
You are welcome 🙏
Thank you so much! I faced this problem yesterday, thought I needed to take the car to a mechanic. Came across your video and I fixed it myself, following the steps closely. Very informative and useful, thanks!
You are very welcome 🙏 so happy this helping so many people out
I just replaced both bulbs and was scratching my head as to why they were still hyper flashing. Two tugs on each spring and bam! Good to go, thanks man!
You’re a life saver! Literally just did and work like nothing!
Cant thank you enough for this information!
Plesse help me build my Chanel subscribe thank u glad it helped
Thanks for the video. My sister's 2013 Elantra had the same problem. I told her to take it to a mechanic because he'd have to remove the bumper cover to get the headlight off. Then I watched your video and got it fixed (without having to remove the bumper cover!)
Oh, and don't worry about the "no wrench" jokes from your viewers. They (and I) know where to come for answers.
The front 2 screws are 10mm, and the rear one is 12mm. In order not to hit that little piece, remove the clip. You may not have to remove the headlight if you have an angled small pair of pliers. Great video help!
Thank you for sharing. I replaced my turn signal bulb without removing the entire light housing. It is easy to get to, you just unscrew it and it pops right out. I cleaned it and replaced the bulb, all is working perfectly as it should.
Thank you for the video! I have a 2013 Hyundai Elantra & your solution was 100% accurate & solved our problem. We took the car numerous times to a mechanic because the same bulb kept acting up, & their solution was replacing the bulb which only worked for a couple of months at best. I am not the handiest guy & desperation drove me to your video which allowed me to permanently fix the problem in less than 10 minutes. Thank you very much!
You are welcome that’s my joy
This just worked like magic! I was thinking about how much it would cost me if I took my car to a repair workshop. I did the exact thing as shown on the video and my turn signal started working normal. Thanks for you video!
You are welcome please subscribe
Been struggling with this for weeks since I changed my bulb. Just got in from screwing around with it and found your video. It’s dark out and I’m going to try this in the morning. Thank you!!!
Hope works out for u
Thanks so much!! This solved our problem too. I was stumped cause we replaced the bulbs with new bulbs and had good voltage at the wiring harness,and still couldn’t get it working. I found your video and did what you said and now have working turn signal lights. Needed it fixed for vehicle inspection. Thanks for your help!! I also subscribed 👍
Thank you
It worked! Thank you so much!!! Mechanic said i needed to spend $500 to replace the whole headlight. Im so happy i found this video.
Glad it helped I really get joy of helping people thank u 🙏
I don’t usually comment online… but this was amazing and it fixed my problem… highly appreciated…. a saver
Thank you……
Glad it helped!
Thank you!!!!! Awesome video. I changed bulbs and couldn’t figure out why they were still fast-blinking. Only video I found that covered this
You are welcome 🙏
@@everetthobbies2062 - Dude's right. You're the only one with this particular fix.
This video was exactly what I NEED to know.
Thank man...grateful.
You are welcome 🙏
Everett, thanks a lot for the video. It worked like a charm! I was able to remove and replace the bulb holder without removing the headlight assembly as well but removing the headlight assembly wasn't too complicated or labor intensive either. Thanks again and keep up the good work! By the way Everett is a cool name!
Thank you 🙏 I get all the joy this helping so many people
Awesome video mate! Took a few tries but it worked!
You saved my life. I followed your instruction, and its working like a champ now. I was planning to buy a new bulb for this. You saved me time and money.
It took me approximately 15 mins...
Thank you very much
U are welcome please subscribe to my Chanel thank u
@@everetthobbies2062 Already did.
@@vishnumohan1706 god bless you
Hey, thanks buddy! I didn't think it was going to work because the contacts shouldn't loosen up that much, and they looked good when I popped out the bulb. I used a tiny screwdriver to bend them up a bit. Now, good to go!
Glad I could help
it worked on my 2013 Santa Fe - thank you Everett!
You are welcome
Nailed it dude! My turn signal is totally fixed now. Thank you so much for your help, and making this video!🎉
You are welcome 🙏
Thank you, brother!
Your tutorial was a big help to me.
Merry Christmas!
Thank u 🙏 Eric
MAN, THIS 100% WORK, I CHANGED THE LIGHT BULB AND IT WAS STILL HYPERFLASHING, I WAS JUST ABOUT TO SEND THE CAR TO A MECHANIC WHEN I CAME ACROSS THIS VIDEO. I DID EXACTLY WHAT YOU DID AND IT WORKED!......YOU SHOULD CHANGE THE TITLE, PUT SOMETHING LIKE "HYPERFLASHING AND LIGHT IN GOOD CONDITIONS". ANYWAYS, THANKS A LOT MAN!
Please sub to the Chanel thank u 🙏 glad it helped
@@everetthobbies2062 i did sir!
On mine i switched the left to right left was messing up and right good it work for one day and then it kept blinking rapidly ..but I gonna give it a try to this new truck you’re showing ..might save $hundreds
This was the one!!! Thank you so much! This worked on my 2018 Elantra. Two headlight assemblies later 😅
You are welcome 🙏 glad this helps
You are welcome 🙏 glad this helps me
Thank you! I was able to take out the lamp without unscrewing anything.
Elantra MD 2011
You are welcome
THANK YOU! Saved me so much time and money
Thank u 🙏 glad it helped subscribe
Thank you!! I can solve the same problem in a Santa Fe 2017
1,000,000 thanks!!!🥳
Thank you I solved the problem, so happy
Got my problem solved. Thanks
Just came upon your video. My daughters car is having the same issue on her 2012 Elentra. I had replaced the bulb, then I week later started flashing quickly. It was driven me crazy. I will get back to you once I do it. Luckily it’s on the passenger side. Much easier to reach. By the way if you take fuse box cover off, you can reach turn signal.
Hope this will fix the issue for u
@@everetthobbies2062 thanks for the great video. Fixed the issue today. Now it’s working. Thanks again.
Totally worked for mine!!
2014 elantra GT ... don't need to remove the assembly - can access the bulb fairly easily just find the correct 'cap' ... cleaned /sprung the contacts and all good. thanks
It worked!!! Thank you so much for the videos
Glad it’s helping all u guys thank u very much
You are the best , solved my problem. Thank you so much !!
You are welcome my brother
Thank you it worked great!
Wow Yes thank you so much!! It was exactly my problem and it took 3 seconds to fix!
Ps: dont need to take out the entire headlight to take out the bulb ;)
How do you get to it without taking the entire light out? Thanks
@@chrisyb1231 if you reach behind the bulb you will see you can twist and take it out alone without touching the headlight
Did this in 10 min rn if you have common sense you can do it just gotta pop out those two metal pieces out little more then it will go out the erratic light great videos about from Hawaii🤙🏻
I'll be damned. You're a genius! Saved me a ton of troubleshooting.
Please subscribe
Solved my problem, thank you!🙏🏾
You are welcome
Thank you! It seems they should have done a recall. Too many people have this problem.
Yes I got rid of that car too many problems but the engine is solid
My hero, thank you so much!
You are welcome please subscribe to my Chanel
You are really nice, thank you so much
You are welcome 🙏
I appreciate you bro‼️‼️‼️
You are welcome 🙏
Great video. Thanks so much for this.
Glad it was helpful!
Awesome, thanks for this video. It doesn't show the specific problem I was having but I can try to see if this fixes it when I get some tools to take the headlight out. Unfortunately I have a feeling the problem might be a bigger issue however as this morning when I got into my car to leave work the headlight was working normally, but when I went out later in the evening to go get my check from one of my jobs and to doordash the issue came back. Funny enough though halfway through the time I went doordashing the issue resolved itself again.
Yes when u pull those two springs towards you than put the bulb back in that should solve it and u won’t have that issue anymore same thing was happening with me try it good luck thank u
I was having same issue as u it comes and it goes one day it will work and one day it does not it drove me nuts 😂
Since adjusting the pins inside the socket has the problem permanently gone away or does it still come back randomly?
It should solve the problem if it does not u might want buy the whole clip and change it out but for me it has fixed issues just make sure u do it right make sure it hold firmly good luck 👍
Thanks bud !!!!
Thank you.
Thank you.
Cheers
Love hearing that u are welcome
Sorry about the year:)) 2014,but still can bee a bulb or other problems also. Thanks ! :)
Any suggestions/ help i have a 2015 hyuandai sonata replaced signal ights they both work without the headlight being on but when turning them on both signal come on but with not flash
That you Sir!
This is happening to me but the low beam and high beam are not working. I already changed them both, could this still be the issue?
Thank you very much for the video...can you remove the same part to replace the connector cord to the turn signal as well?
Yes u can Would be the best
this saved me at least 100 dollars at the autoshop
Thank u 🙏
My 2013 was at the dealer for a month because of this issue and window washer fluid not coming out. I was told it's the BCM so luckily it was covered under warranty and that still didn't fix the issue. So they said the wires had corrosion on them and cleaned them and then magical it worked well so I thought .Picked the car up yesterday and the turn signal on driver side worked hot home and it's acting crazy and will eventually stop working again ..
Got so tired of these issues I got rid of the car
Anyway to explain better about pulling the springs forward? It didn’t work for me but I’m not sure if I did that step correctly
Make sure they have a good connection the bulb and spring need be firm on to the bulb
Thx help a lot
Please subscribe thank you
Thanks a lot.
Please subscribe thank u glad it helped
Great 🎉
Assuming this will work for my veloster
hyundai sonata yf 2010. My driver's side turn signal is flashing rapidly. All bulbs are bright. I changed the light bulb but it still blinks fast. Can you help me where the fuse and turn signal relay are located? thank you very much.
Wow..man ! You are the man,but on witch model you did this? Basicly you don't have to remove the headlight completly:))) And what about if the bulb just burned out ?
Replace the bulb)) it costs less than 5 usd for 2
@@maxim8388 hehe....I did,but I still have the problem :(
Will removing the light be the same way on a 2012 Hyundai Sonata and I'm not understanding when you said bend the spring deal towards you
U know the medal inside of socket that hold the bulb or give power to the bulb those medals pull them towards u so they can hold the bulb firmly it’s a mess with those lights got rid of the car
@@everetthobbies2062 ok, I got it thanks, it's my daughters car👍
@@ignoranceisnotatrend4669 please subscribe thank u hope this will help
Hi
I have Hyundai Elentra 2008 1.6 my car problem blinking light D,2,3 L and epc some time hand break what is problem please tell me I’m waiting for your reply
I have 2012 Hyundai Elantra. The rear turn signal on the left side works but there is no flashing light at the left front outside the car. The left green flash light flashing very fast on the dashboard inside the car. This happens right after replacing Steering Coupler. Is it possible the replacement mess up the left flashing light?
Not sure the car I had gave me gray hair I got rid of it so many issues
Hi i dont know if you respond butt i have a hyundai elantra 2013, everytime i turn on the headlight the turn signal is on the dashboard and frozen. Like it would just be on and im not signaling to turn, its not flashing but the light is frozen 🤷🏽♂️
Yes this will solve the issue same here when I turn headlights it stays frozen good luck let me know the out come
@@everetthobbies2062 well its still the same and the light is still frozen i think it might be the wiring thats wrong with it
No it’s not wiring try get that socket replaced trust me it’s not the wiring
@@everetthobbies2062 yes but i bought new headlights and they are okay but the light is still frozen
Wow did u try to do what I did in new head light man that sucks im sorry please let me know the outcome of ur situation
It definitely worked but it came back is that a different problem then?
Replacethe socket
@@everetthobbies2062 thanks for replying ima going to check it out
@@ant9406hey did replacing the socket fix the issue for you? I’m having the same issue.
If you remove the fuse box cover its easier to remove the blinker bulb
Did it fix ur issue
No but weird thing is i switched the bulb from the driver side to the passenger side and havent had an issue yet but i did replace the socket at first when that didnt work i got the factory bulbs thats didnt work so i switched them around and it worked .also there arnt to many how to videos for are cars on line so the 2014 and the 2016 are near exact when fixing issues keep posting fix videos on line cuz i will definitly watch them buddy i currently when i drive fast around corners and hit a bump my rear end will jurk hard almost lost control on the freeway going 65 around a bin wasnt driving irrate just doing the speed limit but the back dont have sway bar links
@@everetthobbies2062 at first i used a light stick and i tested my connection to male sure power was going to it and there was so i found it odd that id get hyper flash with headlights off but with them on it wouldnt work tho i did do as you said with both sockets to make sure i have good connection to the bulb but when that didnt work i switched them around and they work good now so thanks for posting
What happens if back and front and back bulbs ok but still blinking too fast on one side only?
I never had that issue try to disconnect the battery and reconnect see if that will clear it
I have the same problem but on both sides. Also one of them stays solid when I turn on the parking/headlights, I tried tugging on the springs and it didn't work for me. The light that was stuck on I put on the opposite side and the problem followed. I think it may be the socket itself. I ordered two from the dealer to see what happens since they are not that expensive. Hopefully, this will do it. Did you unhook your battery? and if so did that work?
Take the plastic washer around the housing off fixed mine
It’s red in his vidoe
I have this problem, when I turn on the low beam, turns stop working
Someone should invent a socket or something for those bolts……
Ya drove me nuts
Your killing me with the pliers
My hazard light button is not working properly
Can u be more clear
I press on the button several times and doesnt turn on then when it does i press several times to turn it off
@@OscarMartinez-qs3gb your having a different issue did u try a different bulb
@@everetthobbies2062 do you know it the hazard lights have a fuse?
@@OscarMartinez-qs3gb yes they do check ur fuses and see
I cant believe you cant just unscrew and screw the bulb in I've never owned a car you had to take the thing apart to change the bulb. What a ridiculous design
I tried to reach it with out opening the whole light it was hard I couldn’t get to twist
@@everetthobbies2062 yeah you have to take it apart. Hopefully I dont get pulled over today becuase of their terrible car design.
It’s tight to get your hands in there to loosen the bulb, luckily my young son was with me and I pointed out where the bulb was and his smaller hands he was able to get the bulb out for me. The driver side is harder to get to than the passenger side. You might be able to reach it with long needle nose pliers to loosen it 1st.
Lol is that the only tool you have??
Thanks tho. Will try it later and see if it works.
You can just take it out without removing the whole headlight very unnecessary
Different year require
This didn’t fix my issue
Did u make sure the bulb is sitting firm on springs ? Maybe the unit where the bulb goes in is bad
Good luck I’m sorry it did not work for u but aleast u know where the problem is in that unit it’s nothing major
pizls
Thank u 🙏
@@everetthobbies2062 thank u
How TF are you making videos of working on cars, but taking out 10mm bolts with pliers....
Thank you so much brother! A god send of a video 🩶
You are welcome that’s a joy to hear
I had this problem we bent the tabs up a bit on the outside and inside of the socket piece and it worked for the trip to the store and back then to my friends house the next day. On the way to my car i noticed the drivers side front flasher stopped working again (perfect timing being midnight on a holiday weekend with 1000 cops out). I took all the back streets home to avoid any unwanted attention and then half way home it started working again. Still not sure whats causing it but dont have the money to get it in to the shop right this minute anyone have any idea ill check fuses when i get up.