LiGeoreference is a separate pre-processing software made for the LiAir LiDAR system, it is meant to process the raw LiDAR data into a point cloud. You would then import the point cloud into LiDAR360 for further processing as seen in the video.
Halo.. what the software that you are using to process the data from DJI Terra. in my Case I use Agisoft Metashape to Continuing process the Data From DJI Terra but unfortunately the accuration of the elevation us not accurate so can u help me???
I did not see any GCP referencing on the Horizontal.There should be a clear way just as you can do an elevation adjustment to do a horizontal adjustment. What is that tool?
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
Very great content. Thank you!
Is LiGeoreference a separate Module?
LiGeoreference is a separate pre-processing software made for the LiAir LiDAR system, it is meant to process the raw LiDAR data into a point cloud. You would then import the point cloud into LiDAR360 for further processing as seen in the video.
yes
Is it possible to first classify ground points and then subsequently execute the removal of outliers from the extracted LAS/LAZ data?
Hi, please contact us at support@candrone.com for training specific to Lidar processing.
Halo.. what the software that you are using to process the data from DJI Terra. in my Case I use Agisoft Metashape to Continuing process the Data From DJI Terra but unfortunately the accuration of the elevation us not accurate so can u help me???
Send us an email at support@candrone.com and we will try and answer your question.
Which software is being used? The screen showing the step by step exercise is too small to read the steps?
This is LiDAR 360 from GVI.
I did not see any GCP referencing on the Horizontal.There should be a clear way just as you can do an elevation adjustment to do a horizontal adjustment. What is that tool?
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
Great！
Im skeptical about "las file from terra does not need to strip align". I test to strip align using LP360 software and saw there is a misalignment.
Thanks for sharing!
Please advise if we can use Lidar L1 and h20T camera at the same time? for example in oblique mission of power line inspection
You can not use both systems at the same time. They both utilize the single skyport on the M300 system.
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
Does anyone know why when calculating the GCP I get Null under D and Dz? TIA
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
Can you share any dummy data for hands on practice
This question is a little too specific for us to answer here. Reach out to us at support@candrone.com to speak with a team member and we will try and help you.
which is this app please))
This is LiDAR360
what is the software name please
LiDAR360: candrone.com/pages/lidar-software
Contact our team for a trial key.