Universal Side Skirt Installation Walk Thru How To PART 2
Vložit
- čas přidán 19. 04. 2022
- PART 2 of prepping 84" universal 3 piece side skirts that you see on Amazon and Ebay.
These will fit about any vehicle under the 84" length which should be most 2 and 4 door cars.
Purchased on Amazon EPARTS - GOGOGO
Comes in Carbon Fiber, Glass Black, Un Painted, and Gloss White
Keywords: 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
Acura Honda Toyota Lexus Nissan Infiniti Chevy Chevrolet GM GMC Ford Lincoln Mazda Audi BMW Fiat VW Mercedes Jeep Chrysler Cadillac Hyundai Kia Tesla Volvo Volkswagen GTI Golf CC Accord Civic R Type Mustang GT Cobra Camaro Optima - Auta a dopravní prostředky
Did you screw into the car or the molding
The molding. Didn't want to screw into the body and worry about rust. Skirts holding up awesome so probably will buy some name brand ones next just wanted to make sure I didn't break or scrape these first.
@@banshee2see
what kind of drill are you using? My screws just do not want to go through.
@babysnare420 It's just plastic any drill should work if your screwing into the black molding along sideskirt basically. If trying to screw into actual body of car you would need small self taping screws of don't have that plastic trim to screw into.
@@banshee2see
I have a honda accord 2015 that I just bought the same exact universal side skirts for. for the past 2 days i’ve been trying to drill them in to the underbody of the the side skirts the car already has, but they just dont budge, the screws wont tap. i’ve tried using other screws, nothing. I thought it was the drill so I bought a 20v, nothing. I thought it was the angle of the drill so I lifted the car and nothing. I thought it was the force I was using to push into the screws, nothing. These screws just wont tap into the damned body. Any tips? If your car didnt have the plastic what would you have done? Are there any stronger self-tapping screws?
@babysnare420 Hi you will need to use self taping screws....your probably trying to drill thru the metal rocker panel which is thick and sometimes has rock guard which makes it even thicker. Self tapers will work but you could also pre drill with a hair smaller drill bit and use the standard screws that come with it.