Video není dostupné.
Omlouváme se.

Fixing Fuel Problems on an Old Wheel Horse

Sdílet
Vložit
  • čas přidán 13. 07. 2023

Komentáře • 5

  • @WayneHatfieldBrotherRidge
    @WayneHatfieldBrotherRidge Před 10 měsíci

    I had the same problem got it out with a magnet. Thin put a Briggs Stratton vacuum pump on it. Works great. 😊

  • @AbbyNormalGarage
    @AbbyNormalGarage Před 11 měsíci

    I love those POS plastic pumps with a Passion. I believe the I save tractors guy sells a new Diaphragm for those old school Kohler pumps. Some people convert them to Briggs vacuum pumps. Good call on not starting it. It can break the dipper off of the connecting rod and it blow up. I would try a small magnet in the hole. You might also be able to fish it out from the drain. If you going to pull the engine, you could just pull the pan. I would consider going through the whole motor. New rings and gaskets it will last another 35 years.

    • @SpinningSockets
      @SpinningSockets  Před 11 měsíci +1

      Yes, I've used I Save Tractors many times for buying parts for my older tractor. Thanks for watching!

  • @martinkesler5999
    @martinkesler5999 Před 10 měsíci +1

    use your heat gun to remove the hoses and put them back. About 8 seconds is enough.

  • @williamalbright8878
    @williamalbright8878 Před 10 měsíci

    Bring it to my house and I can fix it for you for free