Thank you boy, work in small printing press company and my boss got one he didn't now how to fix it neither do I but after watching this, you grant me some credit bro.
Bird page: Check that colors are even and that there are no streaks or spots. If black/gray shows some discoloration, there is an imaging unit, drum, or developer that is at the end of its life cycle or is defective. Gradations should have a crisp, solid transition with no marks. Halftones should have solid coverage without voids or marks. If there are problems, the imaging unit is a possible culprit. Note: run halftones at a lower density, 50-125, as the higher coverage shown in the video can obscure issues. Image issues on every print usually come from transfer belt or fuser. Pull part out and see if mark matches. Note that regularly, closely spaced marks, as in the video, hint at their origin due to the spacing. It corresponds to the circumference of the roller (or drum, as the case might be). Clean sensors of transfer belt with dry rag to ensure proper color distribution. Belt should be smooth and shiny with no lines. If there are divots, they will show up on prints, repeating at longer intervals than image issues due to drums or fuser. Make sure print head glass is spick and span. Clean periodically with wand. Inspect drum for streaks or marks. If developer is low, then there will be voids on the image. Black developer should have strong, black coverage. Voids are a problem. If nothing works, do a stabilization and initialization. Ensure that paper is properly loaded and set.
Hi, this is very helpful. If you don't mind I have a question. I have konica Minolta c227 I recently changed my black tonner. And it has been printing fainted black text. What could be the problem? I have called maintance guy ,changed charge roller, drum ,chip...could it be the tonner?
The Good Morning from Papua New Guinea Thankyou for your help The technician here are very expensive looking forward to learn more. please help us make move videos thanks
hi, we have a konica minolta printer 1060 press. the red color in the output of the printer is not red, it's orange. please solve my problem. Thank you
Does bizhub line require "laser compatible paper" or it can work with inkjet paper aswell? I've heard that if you use a coated paper that is not designed for laser the coating can melt and damage the fuser. BTW what paper is that? Thanks for the great video!
Good work and well detailed. Please, what can be done on konica minolta c253, there is alway lines of yellowish color from top to down sides of every page as i print.
🎯 Key Takeaways for quick navigation: 00:14 *🛠️ Troubleshooting common image issues applicable to various Konica color copier models, including the C754e.* 01:05 *📊 Introduction to checking consumable parts' life, such as imaging units and fusing units, to identify potential issues.* 02:00 *📅 Importance of monitoring the replacement dates and consumption levels of copier components to avoid image quality issues.* 03:09 *🖨️ Demonstrating the value of internal test prints (demo pages) for assessing the copier's internal functioning.* 04:42 *🔍 Identifying issues with imaging units that may need replacement due to wear or incorrect reporting (e.g., re-chipped units).* 06:37 *🔄 Discussing common causes of streaks on prints, which often involve the imaging belt or fusing unit.* 07:34 *🧹 Techniques for examining and replacing the fusing unit to resolve persistent print marks.* 08:17 *🧽 Detailing the cleaning and maintenance of the imaging belt and its sensors to ensure accurate color output.* 09:58 *📈 Highlighting the longevity and maintenance needs of the imaging belt to prevent image smudging and registration issues.* 11:07 *🎨 Exploring the primary role of imaging units in most copier issues and the steps for their maintenance and replacement.* 15:27 *⚙️ Introduction to advanced calibration techniques like gradation adjustment to enhance copier image quality.* 16:09 *🔄 Describing full system initialization as a last resort for troubleshooting persistent issues affecting all settings.* 17:20 *📄 Importance of properly loading and setting paper types to prevent image skewing and registration problems.* Made with HARPA AI
saludos tengo un problema y que al momento de querer calibrar mi maquina konica minolta c287 me sale un mensaje arriba que me dice que la estabilizacion no es buena y no me deja hacerla osea no puedo pasar a la siguiente etapa que es donde dice printer no me deja. creo que es por el mensaje que me pone arriba aque se debe esto. yo cambia la banda de tranferencia quee staa dañada. y aun asi sigue con el problema. pense que esta era la causa-
hi. we have problem with red color in konica minolta 1060 press. red color isn't red, it's orange. the color 100 magenta and 100 yellow give us orange. help me plz
Hello friend, how are you, I have a problem that arose on a customer's Konica model C224e, when I do the color calibration, after the process is finished I print the calibration sheet but the Belt Calibration marks appear on the back of the sheet. Could you tell me what could be the cause of the problem?
bro...my copier mx2310u sharp...print colour from computer is ok..but when i copy colour,its become red...already change the scanner but still same..is it the setting copy problem?
SIR MERI MACHINE CONICA MINOLTA C226i ME ERROR CODE C-5360 AA RAHA HAI JO HAT NAHI RHA HAI BAHUT CHIJE KAR LI PAR CODE HAT NAHI RHA HAI AGR KOI SOLUTION HAI TO PLZ HELP ME
Thank you boy, work in small printing press company and my boss got one he didn't now how to fix it neither do I but after watching this, you grant me some credit bro.
Bird page: Check that colors are even and that there are no streaks or spots. If black/gray shows some discoloration, there is an imaging unit, drum, or developer that is at the end of its life cycle or is defective.
Gradations should have a crisp, solid transition with no marks. Halftones should have solid coverage without voids or marks. If there are problems, the imaging unit is a possible culprit. Note: run halftones at a lower density, 50-125, as the higher coverage shown in the video can obscure issues.
Image issues on every print usually come from transfer belt or fuser. Pull part out and see if mark matches. Note that regularly, closely spaced marks, as in the video, hint at their origin due to the spacing. It corresponds to the circumference of the roller (or drum, as the case might be).
Clean sensors of transfer belt with dry rag to ensure proper color distribution.
Belt should be smooth and shiny with no lines. If there are divots, they will show up on prints, repeating at longer intervals than image issues due to drums or fuser.
Make sure print head glass is spick and span. Clean periodically with wand.
Inspect drum for streaks or marks. If developer is low, then there will be voids on the image.
Black developer should have strong, black coverage. Voids are a problem.
If nothing works, do a stabilization and initialization.
Ensure that paper is properly loaded and set.
Hi, this is very helpful. If you don't mind I have a question. I have konica Minolta c227 I recently changed my black tonner. And it has been printing fainted black text. What could be the problem? I have called maintance guy ,changed charge roller, drum ,chip...could it be the tonner?
Awesome, thank you sir, for always finding time to meet our needs. Thank you for all the helpful tips on how to use our Konica machines effectively.
Great job you did
The Good Morning from Papua New Guinea
Thankyou for your help
The technician here are very expensive
looking forward to learn more.
please help us make move videos thanks
hi, we have a konica minolta printer 1060 press. the red color in the output of the printer is not red, it's orange. please solve my problem.
Thank you
Does bizhub line require "laser compatible paper" or it can work with inkjet paper aswell? I've heard that if you use a coated paper that is not designed for laser the coating can melt and damage the fuser. BTW what paper is that? Thanks for the great video!
Good work and well detailed. Please, what can be done on konica minolta c253, there is alway lines of yellowish color from top to down sides of every page as i print.
i have problem with red color in konica minolta 1060 press. red isn't red, it's orange. help me
SIR I HAVE A ISSUE IN WHEN PHOTO COPY konica minolta c250i copying gives a black shadow
🎯 Key Takeaways for quick navigation:
00:14 *🛠️ Troubleshooting common image issues applicable to various Konica color copier models, including the C754e.*
01:05 *📊 Introduction to checking consumable parts' life, such as imaging units and fusing units, to identify potential issues.*
02:00 *📅 Importance of monitoring the replacement dates and consumption levels of copier components to avoid image quality issues.*
03:09 *🖨️ Demonstrating the value of internal test prints (demo pages) for assessing the copier's internal functioning.*
04:42 *🔍 Identifying issues with imaging units that may need replacement due to wear or incorrect reporting (e.g., re-chipped units).*
06:37 *🔄 Discussing common causes of streaks on prints, which often involve the imaging belt or fusing unit.*
07:34 *🧹 Techniques for examining and replacing the fusing unit to resolve persistent print marks.*
08:17 *🧽 Detailing the cleaning and maintenance of the imaging belt and its sensors to ensure accurate color output.*
09:58 *📈 Highlighting the longevity and maintenance needs of the imaging belt to prevent image smudging and registration issues.*
11:07 *🎨 Exploring the primary role of imaging units in most copier issues and the steps for their maintenance and replacement.*
15:27 *⚙️ Introduction to advanced calibration techniques like gradation adjustment to enhance copier image quality.*
16:09 *🔄 Describing full system initialization as a last resort for troubleshooting persistent issues affecting all settings.*
17:20 *📄 Importance of properly loading and setting paper types to prevent image skewing and registration problems.*
Made with HARPA AI
saludos tengo un problema y que al momento de querer calibrar mi maquina konica minolta c287 me sale un mensaje arriba que me dice que la estabilizacion no es buena y no me deja hacerla osea no puedo pasar a la siguiente etapa que es donde dice printer no me deja. creo que es por el mensaje que me pone arriba aque se debe esto. yo cambia la banda de tranferencia quee staa dañada. y aun asi sigue con el problema. pense que esta era la causa-
hi. we have problem with red color in konica minolta 1060 press. red color isn't red, it's orange. the color 100 magenta and 100 yellow give us orange. help me plz
And Does Magenta 100% looks solid enough?
Hello friend, how are you, I have a problem that arose on a customer's Konica model C224e, when I do the color calibration, after the process is finished I print the calibration sheet but the Belt Calibration marks appear on the back of the sheet. Could you tell me what could be the cause of the problem?
bro...my copier mx2310u sharp...print colour from computer is ok..but when i copy colour,its become red...already change the scanner but still same..is it the setting copy problem?
Hello, what is the reason for this picture?
Merci
HI SIR.MEGANTHA COLOUR TOTALLY MISSING IN COPY AND PRINT IN KMC226 , HELP ME TO TROUBLE SHOOT
can you give me the firmware of the konika c754e? thank you bro
Hello, after getting into tech mode it asks to "input password". What is the password?
SIR MERI MACHINE CONICA MINOLTA C226i ME ERROR CODE C-5360 AA RAHA HAI JO HAT NAHI RHA HAI BAHUT CHIJE KAR LI PAR CODE HAT NAHI RHA HAI AGR KOI SOLUTION HAI TO PLZ HELP ME
hi
How are you
Corrige code d'erreur 2257
Aewso me