Да, я б к тебе в гости печатать приходил :-) отличный аппарат, и с чернилами повезло. Если б тебе попали в руки фиговые чернилки (бывают, я попадал) - ты б по другому думал, конечно :-)
Подскажите: при переключении черного матового на глянцевые, чернила уходят в никуда, при переключении обратно на матовый - приходится долго прокачивать. Как запустить PhotoBlack?
Hi, I'm really interested in this set and I would like to buy it but before I have a question for you: Can I replace only one cartridge and continue to use the original one for the others until they are empty? Or I have to replace at the same time all the cartridges? Thanks a lot. Good job!
Леонид Олимпиев быстрый поиск выдал, что ошибка связана с помпой снпч. Связано с картриджами. Видимо где-то травит и не даёт нужного давления. Проблема герметизации а не количества чернил.
How is your longtime experience? I installed the same Set and i am sad of it. The first 10 Din A4 prints where quite good but after then it is horrible. Banding prints, far away colors, just yellow an black. I hope there is some Air in the System but after a few cleanings the result is still the same.
XpartsInside mine are good since, I'm not doing a lot of prints now and still nozzle check is perfect. of course colors differ from genuine, but that is not about the carts. probably your ink is bad which clogs the head.
Thank You for your fast response. It is K3 ink with 99.9% match to the original. I installed them today and id didnt work finde. I will check it tomorrow if another cleaning will help. I must just wait of my service tank because it is full now.
Thank You i will check it. After a few cleanings it works verry well again. It was just Air in the system because i forgot to prime the air out the nozzles. Thank you verry much.
@@uniDTG два разв заказывал на алиэкспресс катриджи и два раза меня там кидали на деньги и ни чего не пришло ....я после этого отказался от покупок на али вообще
Nice & interesting vid, thanks for the hard work.
excellent thank you from portland, oregon, usa
wicked video. thanks :D
Thanks and very informative video..can u tell me where u buy inktank of this model..gunshape empty inktank
What happen when ink reaches bellow ink hole ..will it suck air ?
У меня такой вопрос. Если после переустановки с оригиналов на ПЗК выдает ошибку 0х1404. То дело в ПЗК?
Да, я б к тебе в гости печатать приходил :-) отличный аппарат, и с чернилами повезло.
Если б тебе попали в руки фиговые чернилки (бывают, я попадал) - ты б по другому думал, конечно :-)
21 век:) научились делать
Подскажите: при переключении черного матового на глянцевые, чернила уходят в никуда, при переключении обратно на матовый - приходится долго прокачивать. Как запустить PhotoBlack?
can you show video of actually printing on t shirts
Hi, I'm really interested in this set and I would like to buy it but before I have a question for you: Can I replace only one cartridge and continue to use the original one for the others until they are empty? Or I have to replace at the same time all the cartridges? Thanks a lot. Good job!
Almost sure you have to replace all at once.
Thank you
hi, you can contact us. we provide solutions helping printer-owners saving money without quality compromise.
Does this cartridges fit the New Epson Surecolor P800. Where can we buy it. Thanks Marcello from Milano
We are not sure about p800.
hi, we are an ink manufacturer, you can contact us. we provide solutions helping printer-owners saving money without quality compromise.
И еще такой вопрос. Таже ошибка может быть из-за того, что чернил менее 100 мл из 280?
Леонид Олимпиев быстрый поиск выдал, что ошибка связана с помпой снпч. Связано с картриджами. Видимо где-то травит и не даёт нужного давления. Проблема герметизации а не количества чернил.
How is your longtime experience?
I installed the same Set and i am sad of it. The first 10 Din A4 prints where quite good but after then it is horrible.
Banding prints, far away colors, just yellow an black.
I hope there is some Air in the System but after a few cleanings the result is still the same.
XpartsInside mine are good since, I'm not doing a lot of prints now and still nozzle check is perfect. of course colors differ from genuine, but that is not about the carts. probably your ink is bad which clogs the head.
Thank You for your fast response.
It is K3 ink with 99.9% match to the original. I installed them today and id didnt work finde.
I will check it tomorrow if another cleaning will help. I must just wait of my service tank because it is full now.
XpartsInside take waste tank resetter and new tank to reset your old one many times. just look on CZcams for instruction.
Thank You i will check it.
After a few cleanings it works verry well again.
It was just Air in the system because i forgot to prime the air out the nozzles.
Thank you verry much.
hi, we are an ink manufacturer, you can contact us. we provide solutions helping printshops saving money without quality compromise.
Thank you! Who makes this ink and cartridge?
China. aliexpress.
+3dStereoArt Thank you. There are multiple brands on Alliexpress, can you post a link to the one you purchased please?
hi, we are an ink manufacturer, you can contact us. we provide solutions helping printshops saving money without quality compromise.
where can I purchase this ink system?
AliExpress
hi, we are an ink manufacturer, you can contact us. we provide solutions helping printshops saving money without quality compromise.
Здравстуйте, uniDTG! Отличное видео!
Моглибы Вы сбросить ссылку где можно приобрести именно такие картриджи и чернила.
Зарание благодарю!!!
Serhiy Khrusch AliExpress gun cartridges 3880
Спасибо за быстрый ответ!
Может подскажите что за бренд чернил Вы взяли?
Serhiy Khrusch с того же алиекспресса китайские
Большое человеческое СПАСИБО!
@@uniDTG два разв заказывал на алиэкспресс катриджи и два раза меня там кидали на деньги и ни чего не пришло ....я после этого отказался от покупок на али вообще