I have a ferris and had the same problem and then read the manual and adjusted shocks like you said AND the qtr. Inch spacers on 3in blocks in the rear corners of the deck and dropped the deck to 3 inches and then adjusted the chains! This helped me tremendously with the cut quality!!
I've had so many people ask me why I run 2 different high lifts and what's the difference between them. I'm referring then to this video from now on. I'm sick of repeating it....
Your past experiences with dealing with weeded and crabgrass yards. Any tips on mowing techniques you have done to make those lawns look as nice as possible after cutting? I find myself cross cutting majority of my properties.
drew k I’m a little skeptical. The oil they are using is awfully thick. What bothers me about the big blocks they are using the oil to help cool the engine that tells me there is a design flow somewhere
I’ll find out lol I have the big block 37 efi on my 3200 I’ll let ya know if it blows lol thanks Johnny for your reply hope things are going well for you
drew k no need to worry about the oil guard have it on my is2100 z love it. Oil runs cooler. Same technology used on race cars dry sump system they all need to go to it.
Thanks for the information on the blades. I bought a Snapper this season and have loved it. You mentioned in one of your videos that you take off the striping kit and that you can make any mower stripe. Would you care to make a video on how you do this? I have the flap and haven’t had any stripes this season no matter the grass or height. Any help would be great. Thanks
most guys do not know how to tune the deck to the mower it"s like a farmer tunning a hay cutter to the tractor and guys think they can mow grass at fifteen miles an hour
Two videos in one week! I knew this week was gonna be a good week! Thank you for the videos!
I have a ferris and had the same problem and then read the manual and adjusted shocks like you said AND the qtr. Inch spacers on 3in blocks in the rear corners of the deck and dropped the deck to 3 inches and then adjusted the chains! This helped me tremendously with the cut quality!!
Always love your vids, your live stream was great too 👍.
I've found about the same results with the ICD thanks to your older videos about this.
A&S Lawnscapes what mowers do u run Ferris, snapper?
@@JohnnyMow I've got a 2017 ferris 52"
A&S Lawnscapes 2100?
A&S Lawnscapes the icd 52 cuts better then the 61 slightly different deck
@@JohnnyMow yes 2100 with the 28hp efi, did not know the 52" was different from 61
Johnny super cool slow motion video of a lawnmower cutting grass. Backs up everything you're talking about. Thought you'd like it.
I've had so many people ask me why I run 2 different high lifts and what's the difference between them. I'm referring then to this video from now on. I'm sick of repeating it....
Details details details 👌 good job man been watching for years, simple awesome detailed advice awesome videos
Thanks Johnny. I have an ICD deck. I will use your advice.
Love my ICD deck on my Ferris z3. I run scag blades year round and they work great. I run gators in the fall and winter.
I've had similar experiences, I just put my gator blades on last week to deal with leaves and finish off the season. (turboforce deck)
Your past experiences with dealing with weeded and crabgrass yards. Any tips on mowing techniques you have done to make those lawns look as nice as possible after cutting? I find myself cross cutting majority of my properties.
Billy Goat I really don’t have trouble with weedy lawns unless it’s August and full of crabgrass. I cut it once lift it up 3/4 and cut it again
👍, you should get on Instagram and do quick tip videos!
I been happy with the icd deck
Are you still running the ICD deck? I have some modifications I’d like to share with you if so
Hit me. Would love to hear your thoughts
Johhny, What blade would you run for wet spring growth if you hung a accelerator bag on the machine?
Johnny what’s your thoughts on the oil guard system Ferris is putting on now? Thanks good video
drew k I’m a little skeptical. The oil they are using is awfully thick. What bothers me about the big blocks they are using the oil to help cool the engine that tells me there is a design flow somewhere
I’ll find out lol I have the big block 37 efi on my 3200 I’ll let ya know if it blows lol thanks Johnny for your reply hope things are going well for you
drew k no need to worry about the oil guard have it on my is2100 z love it. Oil runs cooler. Same technology used on race cars dry sump system they all need to go to it.
getting ready to upgrade my mower, looking at ferris 800 or 2100z or exmark radius....any thoughts...
larry siers our of the three the 2100.
JohnnyMOW 👍🏼
Thanks for the information on the blades. I bought a Snapper this season and have loved it. You mentioned in one of your videos that you take off the striping kit and that you can make any mower stripe. Would you care to make a video on how you do this? I have the flap and haven’t had any stripes this season no matter the grass or height. Any help would be great. Thanks
Jonboy's Lawn Service unless your cutting down south I can stripem
Johnny Mow lol yeah I’m in southeast Tennessee
most guys do not know how to tune the deck to the mower it"s like a farmer tunning a hay cutter to the tractor and guys think they can mow grass at fifteen miles an hour
Could anyone read the part number on that blade?
5020842S for 61" deck