Learn how to make a wooden name puzzle using a scroll saw!
Vložit
- čas přidán 29. 12. 2022
- In this video, I show the process of how to make a wooden name puzzle from start to finish!
Here are the materials you will need:
-4/4 Walnut (a little less than 1" thick)
-4/4 Red oak (a little less than 1" thick)
-1/2" Birch plywood
-1/4" Birch plywood
-Painters tape
-Wood glue and/or Loctite super glue
-Box cutter
-Spray adhesive
-Wood oil (I use Watco)
-Sandpaper or an orbital sander (220 grit)
-Rag
-Optional: 3/4" Birch edge band veneer
www.amazon.com/dp/B07P8WXM7P?...
Tools you will need:
-Drill with drill bit
-Scroll saw
www.bearwood.com/pegas-scroll...
-Scroll saw blades (I used size 9,7, 5, and 12)
www.bearwood.com/pegas-modifi...
-Iron
-Optional: Orbital sander
*** Most of everything here can be found at Home Depot except the items with a link. To purchase anything from www.bearwood.com, use my discount code: LOVELY
Well done … I will try it.
Very well explained and so very useful to me as a complete beginner. Thanks!
Thank you for this tutorial! It’s very clear on how to make the puzzle.
You are welcome!!
Great Job! more video's please, very enjoyable
Excellent video. Looking forward to some more. Greetings from Liverpool UK 😍
Thank you so much my first name puzzle was using a laser and was thin also it is a bit of a struggle for my daughter to fit in the letter's. I thought using a scroll saw would be hard but now I think I have learnt a lot and will attempt using a scroll saw great tips I'm so inspired especially the part of using two different woods I love the look.
You’re welcome! You can do it!
So clear and so beautifully explained! Exciting you started a channel!! 🎉❤
Thank you so much!!!
Excellent stuff! Some really useful tips here. Am just about to start a project that will require lots of letter work. Am just waiting for my Wen scroll saw to arrive from the US.
Looks great. Nice job of explaining in detail the steps needed in achieving such a beautiful piece. The results speak for themselves. Much applause 👏
Thank you so much!
Great video!! 👏🙌
Your scroll saw skills are so good!!! ❤❤❤
This is so cool! Can't wait to watch more tutorials 😍
Awesome vid!
Great job!! Thank you so much for your video tutorial
Perfect cutting skill
Hermoso trabajo gracias por enseñarnos !!!
Thanks for sharing!
No problem! ❤️
Thanks for making this, it was super helpful!
So glad! No problem!
Nice Job
Was looking into safety and it would seem that while 100% tung oil is child safe, the watco tung oil would not be since it’s a blend with a bunch of other stuff? Just a headsup for people wanting to try also making something like this based of this video
subscribed!
Very nice. Thanks
No problem!
Good video.thx, Just a idea for those who are try to save a bit of money in these trying times you can use pallets or other reclaimed woods. Great project ,keep your scroll saw vids coming.
good joob👌
Thank you for this detailed Tutorial. I Wish you all the Best With your start at CZcams. 😊
Thank you!!
Clear shelving paper also lets you see grain pattern and any bad spots
Use clear shelving paper instead of blue tape. Much cheaper and easier
Hi, I don’t have all size for this project. Only size 5. Is it recommended to have all sizes you listed in your details or can I use a size 5 blade for this entire project.
how did you cut the hole out of the O without damaging it with a pilot hole
I didn’t make a pilot hole in the middle part of the “O” but rather on the actual O. Hope that makes sense!