How to Install Fuel Pump E3972M in 1998-2000 Chevy Tahoe, GMC Yukon
Vložit
- čas přidán 27. 08. 2024
- Applications:
2000-99 CADILLAC ESCALADE 350 (5.7L)
2000-98 CHEVY TAHOE, GMC YUKON 350 (5.7L)
This video is about how to install the fuel pump modular assembly E3972M in a 1999 GMC Yukon. Airtex is committed to providing the most up-to-date, in-depth fuel pump replacement information that professional technicians need to diagnose, repair and install today's complex fuel delivery systems. Airtex is the only U.S. automotive aftermarket manufacturer that designs and builds electrical AND mechanical fuel delivery system components, including modular reservoir assemblies, electric fuel pumps, mechanical fuel pumps and in-tank sender and hanger assemblies, for a full range of car, truck, fleet and specialty vehicles.
I made an access hatch under the rear seat directly over the fuel pump. I just didn't want to remove the gas tank. lol. So now, If I have to do this again I just move the seat, open the hatch and there it is. They should make a hatch like this on these trucks at the factory.
Tech tip. It's a better idea to unhook the positive battery cable instead of the negative cable. Reasoning is, that if you remove the negative cable, it could still accidentally ground itself. The positive cable cant do anything.
I watched this video and went straight to Amazon and ordered it for my 1999 chevy tahoe 4x4, I recieved it in 3days but I did order it on a Friday night late. I will let ya'll know how it works when I get it installed tomorrow.
How'd it work out?
It was fine , actually still in my truck .
A fine video: thank you. The porno movie background music was annoying, though.
Great video! Thank you!
You're welcome! Thanks for the compliment!
would I have to install a new fuel pump if I broke the fuel line connection? I pulled on it without the special tool thinking it would come right off.
Nice but i see no wiringbthe plugs for pump!? But you help alot anyway thanks
I’m replacing the Airtex fuel pump right now because the sending unit failed. The two flexible fuel lines that go from the pump to the metal fuel lines are kinked and soft feeling. Should I replace those?
New friend here bro
check engine lightbulb on 1999 Chevy pickup truck
Also take the rear drive shaft out for little more clearance to get the tank in and out
How much does this usually cost to get done?
I paid over $800 to get mine done some years back and now have made the access opening under the left rear seat for "next time". Also, the metal deposited strip that the fuel gauge wiper rides on is pretty wore yet the pump is still working. I like the old style rheostat resistance wire which could take a car all the way to the junk yard and still show you how much gas is in the tank. I do my gas fill ups based on the trip odometer mileage.
where can you buy that special tool to remove the fuel lines
Yeah thanks, found the tool. I would recommend to anyone else who needs the tool to buy the metal one. Spend a few extra bucks. Well worth it.
Airtex/ASC Performance Pumps ,i didn't use the special tool to remove the fuel lines,and i broke it both lines conection any ideas to take the rest of peaces of lines?
Airtex/ASC Performance Pumps ,thanks a lot
Whats it called
I would not use any other pump but acdelco
Damaged one connector and could not release the other...double clamps gonna hold oK?
Thanks...great advice
What size removal tool would you need for a 2000 5.7L Tahoe? That's giving me the most trouble.
Also, great videos. This is really helpful
Thank you!
What's the name of the tool??
Question: Without a vehicle hoist, how high will the Tahoe be jacked-up to clear the tank?
What was the answer to this question
i happen to have a 1999 gmc yukon that needs this. i cannot find where the schrader valve is to connect a fuel pressure gauge and/or purge the air from the system. can you tell me where it's located?
moof you still need help ?
Stand on a step stool and look from above the engine. Drivers side, hidden behind lines or a harness or two. You'll see the little cap. I couldn't see it when standing on the ground I had to jump up on the radiator support/engine/anywhere else to support my weight and look from directly above where the fuel lines come in.
What's the name of the tool that you use to disconnect the sending and receving lines called ?
just use needle nose pliers
Fuel line disconnect tool. 10.99 at autozone.
Anyone know the part number for a 1998 Tahoe or Yukon plastic 26 gallon fuel tank?
John Tyrrell did you ever find the part number.. I need to replace my tank and I can't seem to find it anywhere.?
should've disconnected the harness before taking fuel lines off imo
He unplugged battery ...DUH !!
You should have never made that comment imo
NOT HAPPY WITH THIS PUMP!!!!!!!! I WOULD NOT RECOMMEND YOU BUY THIS ITEAM!!!!!!!