Carbon Vanes Replacement|SlavicBeauty Milker
Vložit
- čas přidán 25. 08. 2024
- This video is copyrighted. The video is property of www.slavicbeauty.net
You are welcome to share it on your site or blog only with a link to www.slavicbeauty.net
MUSIC BY: Kevin MacLeod
VIDEO BY: Vasilisa Vasileva
Available from: www.slavicbeauty.net
How to replace carbon vanes on SlavicBeauty milker pump
If the carbon vanes are damaged or worn out, the pump will halt (stop working)
It is important to replace the vanes every 6-12 months depending on how often you use the unit.
Open the pump cover using the screw driver.
Take the vanes out
Put the new vanes in paying attention to the right side. The video shows the WRONG SIDE and the RIGHT SIDE
Now you will have to make sure that the vanes are fitted perfectly. You will need a sheet of sand paper.
Open the bucket lid, so the vacuum does not collect in the unit
Put sandpaper against the vanes and hold it with the lid
Turn the unit on, let the sand paper polish the vanes a bit and turn the unit off
Check if the vanes are leveled with the pump surface. They should not stick out , otherwise the pump will not work
If the vanes are fitted perfectly, close the pump lid the same way as before
You can now use the milker again
Great demonstration.
thank you
Thanks. I learnt a lot from a silent (music only) video.
please do not hesitate to contact me with your questions too
Este fue el mejor video para saber que altura tiene una paleta
Muito bom ótimo vídeo parabéns
gracias
Reemplazar las paletas de carbon es sumamente facil.
Lo que deberian informar seria :
En que momento es necesario.
Que medidas debe tener la paleta en relacion a la camara, la tolerancia tecnica adecuada .
Que valor de vacio me lleva a reali,ar el cambio.
Lo demas lo conocemos todos.
Que aceite usa las bomba de vacio ?
Olá me tire uma dúvida por favor, eu tenho uma bomba de vácuo dê palheta,a minha é mais antiga do que essa do vídeo, a minha gasta bastante óleo do reservatório, isso é normal? Obrigado
How does this compressor rotates
Clockwise or anticlockwise
Important ques sir
What was the price of these vanes
Do you have any experience regarding quality of OEM vane supplies vs other vane suppliers?
we are OEM vane supplier, if you have any inquiry, feel free to contact me.
I want carbon ven repairing vidio
Quiero comprar pero no tengo el teléfono cómo me puedo comunicar con ustedes
I'm looking job
Vacume pamp technician
Price and specs?
does this work with steam? how fast would they wear out. can they be lubricated when steam is used to drive the pump?
Carbon vanes are self-lubricating. What would you use for lubricant? Graphite? They wear out depending on how fast you spin them.
You forgot to mention the appropriate grit of sandpaper. Not so good for the steel parts if you use too rough a sandpaper and too fine a grit will accomplish almost nothing.
Hello, what would be the appropriate grit of sandpaper?
hi
I can supply this Vanes Blade
thank you
Which state and company
I want sir pleas contact number show me
Corban vanes need full pleas send him sir
@@jaggujagadeesha4887 sizes
Hello can you ship to Australia?