iPhone XS Max Charging Port Replacement
Vložit
- čas přidán 5. 09. 2024
- This video shows you how to replace the broken charging port or USB port of iPhone XS Max. The replacement part includes a microphone.
Get OEM Charging Flex for iPhone XS Max witrigs.com/pr...
Get Original Replacement Parts for iPhone XS Max : witrigs.com/d2u83
Tools
Suction cup - zegsu.com/s/dj2cm
Plastic Spudger - zegsu.com/s/dj437
Multi-purpose Screwdriver - zegsu.com/s/dj40x
Plastic card - zegsu.com/s/dj17d
Ultra-thin plastic card - zegsu.com/s/dj18b
Screen Adhesive - zegsu.com/s/dj4xi
The USB port and microphone of iPhone XS Max can get worn out or ineffective because of unsuitable operation and long wear. And it is possible that the contactor of microphone got damaged because of short circuit and you cannot make a clear phone call. This video shows you how to replace and repair the broken charging port flex cable and headphone jack of your iPhone XS Max. The operation helps you recover, earphone connect, effective charging and smooth USB data transfer of iPhone XS Max.
Step 1 Remove the Screen
Step 2 Remove the loudspeaker and the taptic engine
Step 3 Remove the battery
Step 4 Remove the Front camera
Step 5 Remove the motherboard
Step 6 Remove the broken charging port
Step 7 Install a new charging port
Step 8 Install the loudspeaker and the Taptic engine
Step 9 Install the motherboard
Step 10 Install the front camera
Step 11 Test the new charging port
Step 12 Install the battery
Step 13 Install the screen.
Witrigs offers not only mobile repair tutorial including disassembly, assembly, and components replacement guide, but also phone accessories review video on CZcams.
If you are interested in DIY phone repair or latest phone accessories review,
Like Us on Facebook: / witrigsphonerepair
Decided not to change the port after watching this video. Great work man..
Same here, Apple will go full wireless anyway
Lmfaoo me too. I’ve done it on previous devices and this just reminded me how tedious it is😭
Best video I watched for iPhone x charging flat until now 👍
This video shows you how to replace the broken charging port or USB port of iPhone XS Max. The replacement part includes a microphone.
Get OEM Charging Flex for iPhone XS Max witrigs.com/products/oem-charging-port-flex-for-iphone-xs-max-space-gray
Get Original Replacement Parts for iPhone XS Max : witrigs.com/d2u83
You did mistake in one small detail placement, that hold mother board. But all in all 10 of 10! Thanks so much for such good quality video💪👍
Your wrong
@@hvmvp3657 you wrong
Your wrong
actually if your talking about replacing the little copper thing on a different place I agree. I put mine back where it came off and it wasn’t there. Maybe there’s a different model?😊
thanks for your tutorial
This helped massively as my iphone kept rebooting after i replaced my iphone housing , make sure you keep the charging port and flex cable the OEM original ;)
Basically this is a video how to build an iPhone in reverse
I repair alot of androids but apple seems to make this easier yet more complected at the same time. love the battery adhesive compared to a slathered android battery.
Amazing video!!
Do you know if this flex cable contains the "PRS0" sensor (barometer)?
Thank you!
thank you! very easy follow along with.
Legendary great vedio , now I know how too take apart a whole iPhone lmao
exellence , thank u,i love u so much!!!!!!
Yeaaa definitely not attempting that, great video though man
You saved my iphone. Thanks for the great video.
Where did you get the adhesive for the screen and battery?
Tnx boss
Thank you for this!
Thanks, This was very helpful.
it works perfectly. thank its a perfect tutorial. u made a mistake whit a shild from the mother but no mather
Amazing keep doing it
I wish I didn’t leave my battery hook up like you did because now my phone want stay on or go to wifi. Battery should be the first thing off and the last one to be plug up.. I hope I can’t get mine to work .
how come your putting those copper grounding sensors or whatever they are in different places (#22) than other videos and you don it one at all under the taptic engine’s screws(17&18)
Thanks for this video it's. Really helpfull
I ordered a part from the link but no confirmation email. What gives??
anybody knows about the prs0 problem? i think I is connected with charging port
great work..
thank you so much.
i love your videos ..iphone 8plus have videos like this?
yes
Thank you very much sir !
Thank you ji
what is the yellow screw driver he used?
I did exactly as you did, problem is while repairing i lost screw no. 26, i couldnt find anywhere, so I closed all up put new charging port, after I turn it on, it has problem while on speaker on call, it shits down, tried again, same issue, please help ...... 😭😭😭😭.....HELP HELP, i cant figure out, keeps shutting down while talking on speaker for min or less.....
do you know if this fixes the issue with the phone rebooting every 3-5 minutes?
For me it did
Hi, we’re you able to fix the issue? And if so then how?
@@shivasharma9657 hey! Yes the issue was it had an after market charger port flex cable in it. I had to basically remove everything and replace it with a oem charger port flex cable and that fixed it right up.
@@BeardGawd88 hey thanks for the reply, do you know if I can use an iPhone 7plus port for xs Max? It will be original in a way
@@BeardGawd88 how would you get an OEM flex?
so the bottom mic is connected to the charging port cable?
Yes
My iPhone XS MAX is now lagging and restarting every minute. Do you know what could happened?
RT HELP
Did you find out what caused this issue after? Did mine today and having same issue.
@@Cannicky Yes the new charging port was the issue. I put my old one on and it worked again. So maybe it has to be a original one and not a cheap china port…
@@riotp99 on the xs and newer have to use a oem charge port!
Where did get the new parts? from apple ,Amazon
www.witrigs.com
iphone 6s max was easy back then, i changed mine that time,.now my iphone xs max had the same charging port problem, i dont know why they make this complicated
Nice
Will this work if I have a broken pin in the charger area?
You need to take out the pin and try if the charging port works
Still waterproof??
Music?
Invisible_Vibe Tracks
Hell naw this shit is so extra for me...I only kno the basics 🥺
whered you get that screw driver?
eBay, its basically the nintendo screwdriver.
If I’ve paid for Apple warranty and try to do this myself, will it void my warranty?
Yes
Yes it will sadly
The charging port doesnt come out that easy, there’s adhesive on it
In other words take the phone apart completely
So you literally have to strip the whole phone just to get to lightning port.. sucks
YOU DIDNT MENTION I HAVE TO BUY NEW BATTERY!?!?!?!
If your phone battery is damaged, we recommend that you replace it immediately.
All this for a charging port 😒
Hi, a simple solution, use WIRELESS CHARGER 🔌 😊😃!!!!!!
Some guy apparently fixed my port without removing the screen. I feel like he just cleaned it 😢
I did it but the phone restarts every 3 to 5 minutes
did you find out what caused the iphone to do that after? Did mine today and its doing the same.
@@Cannicky not really .
I think its the charging port that i replaced its not genuine
Now i will replace it with the OEM part or the orignal pull
These iphones are way to sensitive
@@sanjivsharma7773
Yes it was the same for me. I swapped the charging port for another and it works perfectly.🙂
@@davidhodge5303 could u pls tell me from where did u order the part
@@davidhodge5303 did u use the orignal apple brand charging port flex or the OEM
Better I will use wireless charging
I used to fix iPhone screens all the time back in the day. This looks horrifying.
😂
I wonder how many people will actually do this to their phone?
I wonder,too. Quite difficult to finish the work.
Wit Rigs can you tell me the music
I did
I'm thinking of doing it as something is up with mine (possibly one of the pins) and is does not connect to my Macbook via the lightening cable but still charges ok, as I spent my childhood dismantling things to find out how they work doing the repair is not an issue. The only thing would be that the waterproof seal gets broken, but is that enough of a reason not to do it.
you broke the face id dude is so stupid use you figner to touch that one
Yeah the finger right on the dot projector learned that the hard way as well once or twice
First
thank you so much