How much gold in 1kg DDR ram? Gold recovery from 1kg DDR ram / chip / Gold recovery - refining /
Vložit
- čas přidán 7. 09. 2024
- Hello, friends! This video shows how to extract gold from DDR ram.
Cutting, burning, grinding, slicing, refining
By joining this channel, you can get rewards:
/ @qwethengoldrecovery
Channel development / support:
www.paypal.com...
#GoldrecoveryDDRgold
#goldrefiningfromram
#gold
That yeild is low. You'll find you have alot of gold your loosing somewhere. For example I just got a yeild of 8.97 grams gold from 4 pounds of trimmed gold fingers. I understand your units were kg. And know the difference after converting it still is low. Even the chips seem low. 1 biggie is when your burning the chips any that crumble will have gold falling loose through those holes down into the fire. And the gold wires are really just to tiny for a sluice or gold pan. Much better to use a beaker or at least a jar and add water let gold settle pour off 2 thirds of water and continue this till water is clean. Basically a tall round container were your gold stays at bottom and dusty ashes are washed away. You can probably double your gold yield here if you just tweaked a few things. Also I'd recommend getting rid of 90% of the base metals like copper before going to aqua regia. You will get less gold in your waist solutions that way. With your process your waist processing is gonna have a high yield later on down the road.
Thanks for the post, it gives me and others an opportunity to improve the process.
You are right the micro wires fell in the fireplace.
My friend, like you, I was opening the chips of the RAMs with a knife for a while, it took me a long time, then I heat as much as I can in the electric heater, take it with pliers, shake it in the cabin and spill the chips. It is easier. If you try it, you will see the difference. Greetings from Turkey 🖐👍
Thanks.
Looks like the material you discarded as magnetic, wasn't 100% clean and likely had gold in it. If you reprocess all your waste, I'd expect another .3-.7grams yet. If not, that was super low yield material. 🤷♂️ I process 1980s stuff, the yields are incredible!
good video , thanks for sharing.Instead of sluice you can improvise a Miller table .That will be more effective
Great video! Veery well done! Btw, just a little question: Why did you pour aqua regia and SMB at the end? Was it to separate gold from copper?
due to the recovery of gold in the sludge
hi i like your videos i would like to know why you didn't use urea before the SMB?
nice video. perhaps my suggestion if you add some CON2H4 before do SMB would more gold you would get. Its to neutralize the HNO3 that still strong on solution. Its effected on SMB process..
Keep it up, nice video, thanks for sharing it :)
For ic chips do remove base metals and then directly add aqua regia...and for the boards u can directly apply aqua regia...it will save your time and the result will be same instead of collecting the foils and doing it
But if we apply aqua regia directly, won’t it also melt other metals and lower the purity of gold?
@@thejohnshin4215 yes. AR is not always the way to go, especially in places where nitric is hard to get.
Based on gold ram scrap price is 30-35 USD/kg a 0,51g gold/kg seems too low
Easiest way to remove chips is with a heat gun its much quicker when do this in bulk, but male to do it in a well ventilated area because fumes or any smoke from the plastic will get breathed its not that bad its a few and it's a one time thing but if you do it in your home, it will smell faintly like burnt plastic. I'm sure that can't be good for your lungs.
Safety must always be a priority.
Yes definelty and probably invest in a good mask as well
I see no logic in the last sentence - 1kg ddr fingers contain 1-1.2g of gold and 1kg ddr chips the same, you must have more then 10kg of sticks to get 1kg chips and 1kg of fingers... something is very wrong here.
Awesome video keep it up. I'd check your solutions on the gold fingers though. Yield seems too low on them.
Zoom 99oo9o⁹9est occasions occasions ôoooo9oo9ooo9o99ooooo9ooooô9ooooooooooo9oo9o9oooo000009000o0⁰000a 0009⁹0où où 00000o0000o000de sera sur 09000o0ô00ô0000o00900099o000o0oôo99o09090o0909099o00o0oooo009090o0o0oo9o09090oo090oo090oo0o99900o999o09o09o9099009o0099⁹99909ooo09oo0009o9ooo99o0o00o00o00o09090909909099090oo90990o9ooo909o909ooooo9oooooo09o09o9909090o99o09o0999909090o00990o9009o00o990099o90oo9o0o09999o99oo909 999o990oo990o09000090099009o0o0o09o0o0900o0o009990o090900o0o9990090ooo099ooo9o99990009909990o09o99o0oo0o0o00o00o0o0990o09090909o90o99⁹ô900999oo99o099900o99009o09090o0o09o0o9990o o 9 o9o o99oo90o9 oo90o00o o o9ooo099090 ooo o 9º o 9 o909 o 999º o º 9 n o99909
Thanks for the video friend the remaining 17 ram boards with fingers were those ddr too so because I noticed that the sizes were different containing upto 2 ic chips per ram board recovery rate is low did you do XRF analysis of the ic chips incinerated powder and did you check the presence of gold in the black leached sludge by AAS method I think gold was lost there.
Thanks for the informative video!
nice work easy method
The carbon from the burned chips will bind up some of the gold
Muchas gracias por tus conosimientos y Saludos desde las PALMAS DE GRAN CANARIA pero podrías subtitularlos en español
Where do you get those types of industrial grinders?
This is an old blender, which is usually discarded because it is outdated, it is an ETA0010.
Great work! That's awesome!
I love doing that stuff toilet!
I have figured out that on average you can recover 20cents of gold from flat screen T.V.'s.
This video was amazing! God bless you and Marry Christmas 🎄
Thank you, Merry Christmas too!
Welcome to my channel about gold
سلام استاد لطفا در مرحله تیزاب ای سی رم درصد اسیدکلریدریک ونیتریک رالطف کنید
You didn't use urea for newtrolize the solution before adding SMB?
It is worth using for better results.
i think wet ashing is a better option for ics.
I've seen a lot of people lose their gold trying to use acid to pull out of the burnt chips
how so?
I'm trying to figure out how much gold is in a pound of trimmed gold fingers. Cuz I have roughly 6lbs.
6 pounds is approx 2.7kg, with .05g from 65gm fingers in this video the math is: 2700gm / 65 gm = 41.5 times the volume in this video. Yield from 6 pounds trimmed fingers is therefor 41.5 x 0.05 = 2 grams -ish.
I get 10.8g gold from 6lbs of closely trimmed fingers. Give or take for different manufacturer gold density on fingers.
@@californiatarheel6658 I ended up getting 11.6 I think. 11 something grams
Do you denox pregnant solution before dropping gold with smb? If so, what chemical do you use for denoxing? Thanks.
The process is not done by me, I have the opportunity to cast where it is handled properly.
Denox with sulfamic acid. It works much more efficient than urea.
Thanks for the effort of making this video the problem is that u dont explain wat u are doin in the video..no one can follow anything u are doin. One one knows the chemicals u are using and all that..
Thanks for explaining what I should change, I'll try to make a more detailed video later!
Filtering took two days? Why you can’t just add more hcl or distilled water to help filter it faster?
It is so fine and dense that it can be filtered through very slowly. The filter is clogged and dripping.
Quite relaxing to watch 😊... must be lots of toxic fumes though...
It is important to pay attention to safety during the process.
Is that all you got?
Yeah that’s great and all except that’s not all gold bro what’s it really add up to when you have just the gold on there?
Excellent 👌
Double nice👍👍
slow the flow of water in the sluice
تشکر به خاطر ویدئو ی سوال داشتم با چی ذوب کردید؟
czcams.com/video/7xtq8A2VNGM/video.html
Sir acid is costly cannot burn ram ? please sir
If possible, the desired metal can also be extracted with a melting process.
ETA MIXER TAKY SME MALI A BOLI K NEMU 2X NADOBA VELKA A MALA
Доброго времени суток Потери большие или что то не переработали
But that is not a correct or fair test because if you have double sided and single sided ram sticks there will be a difference in the weight of the trimmed fingers.
For example if there are mainly double sided in the kg you will get fewer sticks so less trimmed fingers.
It’s just hobby, lab quality is harder to show. Many factors can affect the result, manufacturers differences between brands are small different manufacturing solutions, surface wear, and so on. The total weight also depends on the cutting thickness of the fingers, as cutting by hand can have a few grams of differential in it. Thank you for writing your comment!
@@qwethengoldrecovery I do agree with you entirely. Nevertheless it was a very interesting and informative video.
I did enjoy watching it and have subscribed thank you.
ETA mixer is best maschine.
Sir why you didn’t use the aqua regia solution at 5 20
There would have been quite a lot of solution needed and there is less chance of damage with A / P.
1kg of DDr chip must have 1. g of gold
no supiste hacerlo
Please to pry to god for
JABIR IBNU HAYYAN,
He Mr Kemistri, inventor Aqua Regia..... 😇
GOOD VIDEO LIKE
bro do the same with ddr2 3 ram
كيف تتخلاص من مادة رصاص
يمكن إزالتها بحمض الهيدروكلوريك الضعيف
good video.
thumbs up from me
Elinize sağlık çöktürme işlemini yapamıyorum detaylı yazarmısınız
Süper 🔔👍
Is there any possible way to connect to you.
what exactly are you using as the filter material?
gauze coils, available at a pharmacy, these have expired and can be taken away for free
@@qwethengoldrecovery thank you very much!
Ap na tazb k bara ma btya ni kn sa sb se pala use kia
How many grams are extracted from one kilo of RAM for a computer?
It depends on how many ram there are in a computer and their size. So it depends on many factors.
Dude, 1" wide chisel against a concrete step! Or, I've see a third world guy do the chisel on a slanted board with a stop in it, like he does it all day.
Where can you sell the chips?
Look for people, companies who deal with it.
Hello, how much gold is 8 kg ram?
Hi, it depends on the type and some differences between the manufacturers. (DDR1, DDR2, DDR3, DDR4 + brands / PC or laptop)
@@qwethengoldrecovery
thank you all what's the DDR2 estimate
@@sonnurmeral6314
In my opinion, I defined it as follows: (rounded down, so it should definitely be more than that)
8 kg DDR2 -> [0.7kg finger + 1.1kg chip] ---> [~4,1g gold chip] + [~0,9g gold finger]
Based on these: There should be a gold yield between 4,5 and 5,5 grams.
It’s just an estimate, but I think it will look kind of like that. :)
I've gotten between 5 and 9 grams in 8kg of ram. Alot depends on the quality and age of ram and also alot depends on your process. I'd say in this video he lost minimum of one third of his gold maybe upto half of it.
👍
Mag Kano po one kilos Dd r2
👍🏾👍🏾
Mag Kano po memory ddr2 1 kilos
Nasa pagitan ng 50-60 kung tama ang pagkakaalala ko
what is SMB
sodium metabisulfite
Can you use 50% Nitric Acid to separate the gold from copper? Just a question
Only the copper will dissolve
Qwethen hello. I am a fan of yours and I would like to know where I can buy bulk electronic scrap to buy 3 kilograms? 😉
Here in Hungary, people often accumulate old bad PCs for years, they have to be caught because they are easily thrown in the trash.
Sve naybole brate 🇧🇦
It hurts to me because i need ddr ram and i can't find it anywhere
i want ask you please name of aseet please and please
what exactly do you mean?
You are basically breathing toxic fumes by burning chips.
Of course, the right distance must be kept.
Sir my ganyan ako bibili kapa?
a lot of hard work for 1gm of gold
For many of us, it’s a hobby, so it’s worth it.
good video brother.silly question maybe..what does 2dl mean. I see it in most videos...thanks in advance.good stuff
With us Hungarians, fluid is a unit of measurement. 1 deciliter = 100 milliliters
thank you so much..
@@qwethengoldrecovery hmmm... tudtam hogy valahonnan ismerős az az erőspistás üveg! 😉👍🇭🇺
@@ogbullion No igen :D
@@qwethengoldrecovery I thought you were Euro seeing dl in the video, thanks for confirming my suspicion! It's pretty normal for Commonwealth wine (Aussie, NZ etc) to be sold in 750ml (milliliters) bottles, and French and German wine in 75cl (centiliters) bottles... same volume, different labelling. Those backwards hillbillies in the US of A are still sticking to antiquated Fluid Ounces.
I guess this is what happens when you create a video on a subject you're not actually qualified to show. There are so many areas pointed out in the chat, that you have got wrong. So if I can offer some advise to you, it would be: Do more research on the processes, because by posting videos like this, you're giving other people the wrong information that could cause them to injure themselves (or others).
It is also necessary to present what we make mistakes in, so that others and I can learn from it, many have convinced me of what should or should have been changed, so in the end we can learn from each other.
Usted es mudo hable para saber que esta haciendo gracias
Uso mi propio idioma, se traduce por oraciones sin sentido. Por eso uso subtítulos en inglés, para que puedas traducirlo al español.
Comic Sans ??? Really ?
Smb powder ko hindi me kya kahte hain
Sodium metabisulphite .
I wish you were wearing PPE, man gloves at least.
There’s quite a bit of time between steps, so I’m not wearing gloves all the way through. I also use a fume hood and gas mask, one of my videos can be seen as I put it back in the storage box at the end of the process. Where I have to make uncertain hand movements I use protective gloves, of course I know what to do if the liquid gets on me. Thank you for your comment.
@@qwethengoldrecovery I watch a bunch of your videos and see you pouring mixed AR hot..with no gloves on.
@@richardoconnor7162 In some cases, gloves aren’t worth much, but I understand your views.
@@qwethengoldrecovery you have to understand that people /kids even are watching and going to do this. That is why so many other channels have safety disclaimer at the begining that keeps them safe but still best to set a high safety example for the show your putting out.
@@richardoconnor7162 Thanks for your suggestion, I'll try to pay attention to that in more videos.
Nice not perfeck
+937 👍🎓
Hardly worth the bother.
For most of us, it’s a hobby so it’s recreation. It’s hard to get to the level where we make a living.
Very bad process
Please present your own video and share your experience about this process.