Thanks so much for the video! I have a 1998 Civic sedan and was having issues with the rear door handles not pulling back into place after being opened. Your thorough video gave me the confidence to tackle these panels. Probably saved me lots of scraped knuckles and swearing!
Hi your vídeo was great i learn how to pull over the interior of the door to Change the window lift. Thank's man. Good job. Best regards Paulo-Lisboa-Portugal 11:18
Great video. The only thing I have to add is that if you don't have a pick tool, the HONDA repair manual recommends using a thin rag to pop the window clip off. Simply press the door card in and slide the rag up around the clip and lift up. It will snag the ears and pop it off easily. Awesome stuff!
I loved it, thanks for the video. Once I followed all of your instructions, I noticed that my problem was that I need a new outdoor handle. Your video was very helpful thanks.
I bought a new handle and installed it based on your video! Thank you so much. I now have a broken passenger side review mirror that I need to replace. I think I need to replace the whole unit. Do you have an instructional video for that too? Thanks again for sharing your knowledge.
+George sarkees I do not, but it is very simple! Just pop off the cover on the inside of the door and remove the nuts holding the mirror on. I hope that helps! Thank you for commenting and updating, I'm glad I could help!
Bom video tenho um Honda Civic 1.6 VTEC de 1993, o vidro do condutor não funciona,é eléctrico. Aprendi com o teu video a maneira de desforrar a porta para poder resolver o problema. Obrigado Paulo - Lisboa - Portugal - 19:40
My crank lever has a very thin piece of plastic in between the panel and the lever rather than the thick piece you have, it’s rather difficult to separate the two
Very excellent video! Do you by chance have the part number of that plastic clip to reconnect the outside door handle to the linkage? I have a friend that has a 93 Civic fast back that has the outside handle broken and I thought I'd help him fix it! Thank you.
That specific one, no idea, here is a variety pack that should work shop.advanceautoparts.com/p/dorman-help-door-lock-rod-clips-75450/9110113-p?c3ch=PLA&c3nid=9110113-P&adtype=pla&product_channel=online&store_code=&gclsrc=aw.ds&&gclid=EAIaIQobChMIr52r7bPl5wIViJOzCh20cA6MEAQYAiABEgJrOfD_BwE
+teggyboii official it is just a hooked pick. You should be able to get a straight one, a 90 degree bent one and a hooked one in a pack together for pretty cheap
yup just the handle. i sprayed a bit off wd40 down the keyhole and i got it to open, however I closed the door again to see if it would work but no luck, im back at square 1
Thanks bro I needed to change my door speakers, now I can
Thanks so much for the video! I have a 1998 Civic sedan and was having issues with the rear door handles not pulling back into place after being opened. Your thorough video gave me the confidence to tackle these panels. Probably saved me lots of scraped knuckles and swearing!
You’re welcome! I am very glad to have helped!
This video came in handy for front speaker replacement on my 1994 Civic EX. My EX has power windows but the door panel removal was very similar
+Andrew Harbeck awesome man! I bet it's about to beat.
Thanks man , just picked up a 92 Si hatchback , gonna restore it , appreciate the tips and tricks
You’re welcome!
Thank you for this video...im from malaysia use your video to repair my lock...
Hi your vídeo was great i learn how to pull over the interior of the door to Change the window lift.
Thank's man. Good job.
Best regards
Paulo-Lisboa-Portugal 11:18
Obrigado, amigo!
Great video. The only thing I have to add is that if you don't have a pick tool, the HONDA repair manual recommends using a thin rag to pop the window clip off. Simply press the door card in and slide the rag up around the clip and lift up. It will snag the ears and pop it off easily.
Awesome stuff!
Samuel Ross very good info! Thank you for sharing! I'm glad you enjoyed it.
Your civic is BEAUTIFUL
Thank you!
Thank you, you just saved me a lot of time and money
You are welcome! I am glad I could help!
I loved it, thanks for the video. Once I followed all of your instructions, I noticed that my problem was that I need a new outdoor handle. Your video was very helpful thanks.
+George sarkees thank you for the comment! I really appreciate it. And I am also glad it helped you out!
I bought a new handle and installed it based on your video! Thank you so much. I now have a broken passenger side review mirror that I need to replace. I think I need to replace the whole unit. Do you have an instructional video for that too? Thanks again for sharing your knowledge.
+George sarkees I do not, but it is very simple! Just pop off the cover on the inside of the door and remove the nuts holding the mirror on. I hope that helps! Thank you for commenting and updating, I'm glad I could help!
Thanks mate. Very helpful video.
You explain things very well! Thank you!
+Celia Bueb you're welcome! Glad I could help!
Very helpful, got it right the first time thanks
bigpetezone3 you're welcome! Thank you for watching!
That door hander is something god damn
You helped me a lot with this video. Thanks a stack mate :)
Dude this is going to save me time and money thank u
You are very welcome!
For the window handle. It's easier to slide a rag edge in-between and go side to side with the rag.
Ik this old but thanks I am 15 and just got a 1993 hatchback eg and it came with one door panel off and I didn’t know how to install it back
You’re welcome man! Glad I could hear that it helped!
THank you so much! I need to lubricate my manual windows cause they getting grippy!
Thank you sir
Excelente hermano,e funcionó perfectamente
I had the SAME issue lol thanks for the video man
Tremendously helpful thanks man.
You are very welcome!
Excelent guide thanks
Nice looking 300zx in the background
Thank you, thank you. It's currently down unfortunately, but that doesn't stop it from being the best looking car I own lol
The Feesher so you reallly own a z if it doesn’t break down a time or two? Lol
Bom video tenho um Honda Civic 1.6 VTEC de 1993, o vidro do condutor não funciona,é eléctrico.
Aprendi com o teu video a maneira de desforrar a porta para poder resolver o problema. Obrigado
Paulo - Lisboa - Portugal - 19:40
English, por favor
Nice video I have a very similar car even the color is the same haha
+HestheOcelotCommander thank you! They are great cars!
My crank lever has a very thin piece of plastic in between the panel and the lever rather than the thick piece you have, it’s rather difficult to separate the two
Cool, thanks. What size speakers fit? Door and rear..
Thanks.
Thank you for showing and saving a Honda. Do you have a vlog showing how to remove a dashboard?
Unfortunately I do not, I may need to make one, it’s probably something a lot of people want to know
Very excellent video! Do you by chance have the part number of that plastic clip to reconnect the outside door handle to the linkage? I have a friend that has a 93 Civic fast back that has the outside handle broken and I thought I'd help him fix it! Thank you.
That specific one, no idea, here is a variety pack that should work shop.advanceautoparts.com/p/dorman-help-door-lock-rod-clips-75450/9110113-p?c3ch=PLA&c3nid=9110113-P&adtype=pla&product_channel=online&store_code=&gclsrc=aw.ds&&gclid=EAIaIQobChMIr52r7bPl5wIViJOzCh20cA6MEAQYAiABEgJrOfD_BwE
I have a 4 door civic as well
Hell yeah!
thanks bruh bruh
what about upholster all door panels on civic 92-95
??
it can be done?
+Tausi New VHS Technologist I would like to do that, but I honestly have no idea how it is done.
Hello
Some one know the serial number of door panels cover for Honda civic 92-95 sedan
4dr.
2 front door panel cover and 2 for the back.
Hi, tell me the size of the front speakers?
I take it that to replace the door speakers you have to take the whole door panel off- that the cover is one piece with it?
Actually no, not the fronts at least, the covers are clipped in
@@TheFeesher yep.. pulled them off last night. Found one of the wires broken off the connector and the connection base broken in 2, (rusted).
Your a fucking g thank you
what's the tool called you used at 2:30 ? to remove the clip ?
+teggyboii official it is just a hooked pick. You should be able to get a straight one, a 90 degree bent one and a hooked one in a pack together for pretty cheap
I just cut the end of a coat hanger and made a small hook. Some videos show you can use a putty knife to push the clip off from the other side.
+Brian O that is true, you can really use anything, as long as it is strong enough to push or pull the clip.
i didnt do the check with the screw driver and now i closed my door and its not opening, what else can I do? help!!!
+scotty vtec did you replace the latch assembly?
yes I changed the outer door latch
scotty vtec just the handle?
yup just the handle. i sprayed a bit off wd40 down the keyhole and i got it to open, however I closed the door again to see if it would work but no luck, im back at square 1
scotty vtec will it open from the inside?
😭😭😭😭