Really impressive man, I’m guilty of being a bit of a car purest but the engine/turbo seems so good in the Mini platform 💯 gotta say I’m still out on the Volvo hood ornament 🦌 thou
The engines in the r53/r50 aren’t that bad they’re just limited due to their simple design. Having the power of v tec and a k20 or k24 blows my mind. Couldn’t imagine the feeling of that while driving
Am about to buy a 2003 mini purple 💜 very rare color convertible just to do this crazy swap .... I live in New Jersey hope to get some help from the master himself..... i used to be on the honda game back then with gsxr and type r era .... I missed this old days
red tops, amazing to think Honda was sticking these in family cars back in the day, Remember when you buy them in scrap yards for not much more than the price of a Ford 2l pinto
@@pmpworx7331 I have a 93 240 automatic that I’d like to do a non turbo k swap in. I think if you were to build a kit and sell it you’d be on to something. Motor mounts, measurements and Info on hooking up the Ecm etc. just a thought
Awesome vid! I've never seen anything like this before... I own a 03 R50 Mini and I really like the idea of K swapping it. From what car shoult it be good fit? And if possible AWD, fron what car? You inspire me guys!
How did you get the oil pan to clear the subframe on the 240? Just subframe spacers and the hood clearance? Also are you worried about oil starvation during hard turning? I know allot of the rwd swap pans have huge baffling and a deeper sump to compensate so I was just curious.
Im using original oil pan but i threw in an oil baffle in there by Blox. I just spaced the subframe a bit and cut the hood. Your correct. Rwd oil pans are expensive.
Its the ram horn style. Everyone uses the sidewinder but I like this fitment better. It’s harder to make the exhaust have a 3 inch downpipe but I made it work by doing a two piece design.
@@pmpworx7331 Oh okay nice! Did you happen to fab it up yourself from scratch, or did you buy an existing ram horn style manifold and then modify it to fit your needs?
Dude i have questions, i have a 240 sedan that i am planning this same swap on, what transmission and rear end you have? Stock honda ecu? Motor mounts? Oil pan issues? Just now found your channel. This is awesome
Thanks man. We have a whole process in our videos. It’s kpro ecu, s2000 transmission and custom mounts. Check out the vids. Lmk if you have any other questions.
@@pmpworx7331 Would it be terribly difficult or expensive to do a NA k20 swap. I own a r50 and might be in the market for a new engine soon so I’m considering a k20 swap from a type s rsx. Also is a new ecu required or trans. I was wondering if the stock 6 speed would fit up because my r50 has a 04+ 6 speed swapped in already.
K-Mini (not the damn coffee maker) should be a thing! K-Miata’s are becoming common, but the Mazda BP engine was never an unreliable engine like that crap that comes in the BMW Mini. K series conversions should become a common engine replacement for mini enthusiasts 🤷🏾♂️
Sadly I settled for an R56 because I couldn't stand the supercharger whine (each to his own), but this combo of the smaller, prettier car and VTEC is perfect. Personally I think more than 300 horses spoils it... Pipes a bit drony tho?
Hi really nice project ! How did you manage to fit the driveshaft axles into the mini cooper hubs? Im on the same project right now and im a little scared of how to do for the driveshafts and in France we have no one that can make custom ones... Thanks in advace and great job again guys
Just purchased an r56 Noticed your mounts look different than the typical rpt ones that’s seem to be so popular . I’ve heard of using hasport mounts for an EF. What did you guys use ?
Little harder than I prefer but not too bad. Slave is the honda cylinder. Master is the oem mini. Stage 4 competition clutch. Stage 1 was the beat buy would not hold the power after the turbo setup. If i were to put in another clutch I would probably use stage 3.
Correct. Under the passenger seat where the factory unit is located. The nav tool is a piggy back system. It allows you to add inputs. I also have an input for reverse camera or a gaming console aka video input. The audio is carried through an aux if needed.
@@pmpworx7331Nice thanks for the quick reply! do you have more details on the fitment? Im looking to get my mini some new rims, I got some mst time attacks but they are 17x9s and they stick out too far, I know you did the kswap but Im not sure how much that changes down there, mines red and white with the black mesh grill like yours and I love how your fitment looks so any details at all would be greatly appreciated c:
@@pmpworx7331thanks for answering my questions, its hard to find answers on these lil minis, did you go with a 16x8 instead of a 17 for any certain reason? And how does it make the car feel? Any differences in handling and performance compared to a 17?
A Mini and a Volvo, this man was British in a previous life.
When you see someone driving with a computer or tablet...don't race it's a trap 😆 sick mini
Great mini.. I wish I could K swap mine 👍
Really impressive man, I’m guilty of being a bit of a car purest but the engine/turbo seems so good in the Mini platform 💯 gotta say I’m still out on the Volvo hood ornament 🦌 thou
The engines in the r53/r50 aren’t that bad they’re just limited due to their simple design. Having the power of v tec and a k20 or k24 blows my mind. Couldn’t imagine the feeling of that while driving
Here I am with my stage 2 2012 JCW.....I want this lol
Looks factory made! I'd love to do a 242 GT with this set up with a turbo. Nice build!
The volvo will be an absolute drift missile with a turbo👽
That's what I need to swap my R58 sd, great job guys !
Looking forward to more videos. Good job and dope builds bro
you got to love wringing the neck of an na motor 😍
Wow those some good looking cars man, going to attempt a k swap on my 242.
Both cars excellent swaps 👌 Having a Mini r53s i love that swap. No traction with that power, would love to try it
Am about to buy a 2003 mini purple 💜 very rare color convertible just to do this crazy swap .... I live in New Jersey hope to get some help from the master himself..... i used to be on the honda game back then with gsxr and type r era .... I missed this old days
How is it looking
red tops, amazing to think Honda was sticking these in family cars back in the day, Remember when you buy them in scrap yards for not much more than the price of a Ford 2l pinto
Exactly the swap I want for my r56
👀 great content!
Nice x 2👍👨🏻🏭🇬🇧
So impressed!!
Please make more videos of the volvo!! I have a 90' 740 I want to k swap!
Anything specific you want to see?
@@pmpworx7331 I have a 93 240 automatic that I’d like to do a non turbo k swap in. I think if you were to build a kit and sell it you’d be on to something. Motor mounts, measurements and Info on hooking up the Ecm etc. just a thought
Awesome vid! I've never seen anything like this before... I own a 03 R50 Mini and I really like the idea of K swapping it. From what car shoult it be good fit? And if possible AWD, fron what car? You inspire me guys!
AWD is possible. Manual element or crv drivetrain. Rsx or tsx motor.
@@pmpworx7331 Thank you!! What year do you think would be the right choice?
Wow 💪🏼💪🏼💪🏼💪🏼
That's badass
How did you get the oil pan to clear the subframe on the 240? Just subframe spacers and the hood clearance? Also are you worried about oil starvation during hard turning? I know allot of the rwd swap pans have huge baffling and a deeper sump to compensate so I was just curious.
Im using original oil pan but i threw in an oil baffle in there by Blox. I just spaced the subframe a bit and cut the hood. Your correct. Rwd oil pans are expensive.
what wheel and tyre setup do you have on the mini? looks great
2:00
yeah.. everything working.. (no revs signal...) hahah
That mini is awesome! Did you custom make a turbo manifold or where did you purchase that one to use on the mini?
Its the ram horn style. Everyone uses the sidewinder but I like this fitment better. It’s harder to make the exhaust have a 3 inch downpipe but I made it work by doing a two piece design.
@@pmpworx7331 Oh okay nice! Did you happen to fab it up yourself from scratch, or did you buy an existing ram horn style manifold and then modify it to fit your needs?
Dude i have questions, i have a 240 sedan that i am planning this same swap on, what transmission and rear end you have? Stock honda ecu? Motor mounts? Oil pan issues? Just now found your channel. This is awesome
Thanks man. We have a whole process in our videos. It’s kpro ecu, s2000 transmission and custom mounts. Check out the vids. Lmk if you have any other questions.
Nice! Did you do the swap all on your own? I’m interested in a swap on my r53 mini
Yes all me. Go for it. Its was fun!
@@pmpworx7331 Would it be terribly difficult or expensive to do a NA k20 swap. I own a r50 and might be in the market for a new engine soon so I’m considering a k20 swap from a type s rsx. Also is a new ecu required or trans. I was wondering if the stock 6 speed would fit up because my r50 has a 04+ 6 speed swapped in already.
K-Mini (not the damn coffee maker) should be a thing! K-Miata’s are becoming common, but the Mazda BP engine was never an unreliable engine like that crap that comes in the BMW Mini. K series conversions should become a common engine replacement for mini enthusiasts 🤷🏾♂️
Sadly I settled for an R56 because I couldn't stand the supercharger whine (each to his own), but this combo of the smaller, prettier car and VTEC is perfect. Personally I think more than 300 horses spoils it... Pipes a bit drony tho?
All motor k24 can give you 250ish HP. Pipe is not drony.
LOL yeah more power delivered properly that you can control with your own foot "spoils" a car--all talk online fantasy dweller
I have a r56 S that I’m looking at doing a k or a b swap.
Hi really nice project ! How did you manage to fit the driveshaft axles into the mini cooper hubs? Im on the same project right now and im a little scared of how to do for the driveshafts and in France we have no one that can make custom ones... Thanks in advace and great job again guys
Cooper hubs are 32mm splines. Just like honda 4 lugs.
Just purchased an r56
Noticed your mounts look different than the typical rpt ones that’s seem to be so popular . I’ve heard of using hasport mounts for an EF. What did you guys use ?
I made my own mounts modifying replica k series mounts civic si chassis
hey nice work on this, i have a Peugeot 206 and wanna do the same kind of swap any pointers on what i need
Treat it as a regular honda swap. You will need patience and time.
Niceeee
i am not in any rush
Getting ready to do a k swap soon !!! What axles did you use in the R53
Oem honda. Rsx and integra
What motor mounts did you use?
What is your clutch master and slave setup ? Hard to push ?
Little harder than I prefer but not too bad. Slave is the honda cylinder. Master is the oem mini. Stage 4 competition clutch. Stage 1 was the beat buy would not hold the power after the turbo setup. If i were to put in another clutch I would probably use stage 3.
What's the IATs like?
Ambient. Hood scoop works great
Try shifting the car without red line in it
can you built one like this for me i will pay for it i have the mini and the engine please reply
Sorry you and 20 more people want a setup like this for me to do. I just do this as a hobby for fun. But maybe in the future.
Can you do an ecu setup vid for the mini cooper?
Maybe
@@pmpworx7331 Thanks man love the build
how did you get gauges to work on that nav screen?!?!?
Hondata app on my ipad. Using hdmi converter. Nav tool
@@pmpworx7331 does the hdmi converter tap into the stock r53 nav screen?
Correct. Under the passenger seat where the factory unit is located. The nav tool is a piggy back system. It allows you to add inputs. I also have an input for reverse camera or a gaming console aka video input. The audio is carried through an aux if needed.
@@pmpworx7331 wow that’s amazing. I’ve been looking for something like this. Do you by chance have a link to the adapter you’ve purchased?
Literally web search navtool. But here is the link. www.navtool.com
Did you bought the swap kit from RPT?
No kit. I made my own mounts utilizing 07-11 civic si mounts. I did this swap in 2018.
@@pmpworx7331 do you have an email?, I'm interested in doing this swap but I need information
Google K24 into r53. Look at the NAM forum.
have u wrecked it yet ?
Negative.
Does your mini have AC?
Not yet. I need a small size condenser
Whats the mpg on the volvo
About 30 highway
is it turbo charged?
Yes
@@pmpworx7331 I’m wondering if it’s possible to make it awd with dct trans?
It’s possible just some good skills will be needed in all mechanical, structural, and electrical engineering aspects.
How much a swap like this will cost?
About 4000$
@@pmpworx7331 not that pricey 👍 sadly not here in germany
Yea thats on the low side. It’s probably close to 6k for parts now.
Would you sell or do a commissioned build?
I can't wait for mine to die so I can K24 swap it
If you ever wanna sell, let me know
What's the hp of the mini?
Never tested but 9 psi on pump k24a2. You can assume 350-420 range
@@pmpworx7331 Epic! Keep it up love the projects!
What rims are those?
Rota grid V
@@pmpworx7331Nice thanks for the quick reply! do you have more details on the fitment? Im looking to get my mini some new rims, I got some mst time attacks but they are 17x9s and they stick out too far, I know you did the kswap but Im not sure how much that changes down there, mines red and white with the black mesh grill like yours and I love how your fitment looks so any details at all would be greatly appreciated c:
@@pmpworx7331I was actually lookin at rota grid vs but I don't know if they ship to the states cause I think they're in Australia
Bought them on ebay shipped to nj np. 16x8 30 offset. They fit fine and even clear my jcw gen 1 calipers.
@@pmpworx7331thanks for answering my questions, its hard to find answers on these lil minis, did you go with a 16x8 instead of a 17 for any certain reason? And how does it make the car feel? Any differences in handling and performance compared to a 17?
WHERE CAN I SEN U A MESSAGE
K swapped ovlov is an abomination in the beat kind of way.
Hey bro tough work 💪🏽Do you have a instagram? I have some questions regarding the custom gas pedal you made for this build.
Whats your question?