Finally working on my bathroom. Thought about diamond coat. Been in plaster for 17 years and never have done it on any job. This is the best how to video I’ve ever seen in my life. Thanks ✌️
Gypsum and plaster of paris are completely different products. Plaster of paris may well be used as an excilerator in this product, and can be used as such with drywall spackeling compound as well. The dry mix quick set drywall mixes are simply dry mix spackle with various amounts of Plaster of paris mixed in based upon the desired set up time. The felt brushes are fine for brushing over the finish product in order to make a more uniform look. But back in the day we used 10” bristle brushes for trowling. We used soaked lime mixed with gauging plaster and applied over a gypsum brown coat. So as an old plasterer, i will say you did pretty well on this job.
Hi Ernie, thanks for the comment. We use lime and gauging plaster too, just not this application. Diamond has a ratio of gypsum and lime, but only about 30% lime making it a faster finish to paint.
I'm so glad I found your channel. Im a professional painter and artist. I've decided that I'm going to learn plastering more as an artistic finish. You explain things so well. Thank you.
Great video. My company paints, drywall’s, and plasters. It’s fun to see others do exactly what we do. I subscribed and I’m looking forward to watching more.
Hi Steve, thanks for watching! We have big plans for these videos and will be posting more in the next couple of months. It's a challenging trade because of all the variables you'll come across on a single project - and that's what make you and I more experienced than the rest!
Please do not paint plaster. Over three millennium in service to us as wall a finish, one thing I have learned in my 50 years is DONT PAINT PLASTER- STUCCO- OR SHOT CRETE. If there's something recently discovered that changed the game with our old friend Plaster, feel free to correct me. PAINT MURDERS PLASTER. No good can come from that. Long time Lather Plaster's best buddy. Peace.
nice. years ago I did some plastering after picking up some tips from Walter and Wally Walden (SP?) in Philadelphia. I believe they used sheep shit for a retarding agent when they used one. They started with a pile of sand and plaster for a base coat. They were like third generation plasterers. They were simply incredible. I did 3 coat plaster pretty well but never achieved their level of speed. They were real artists and I was simply an imitator. I used to buy plaster lathe and soak it in water on occasion but mostly used wire. Fast forward 34 years and I have to do some repair work in our basement and really I've never used a Diamond finish so it was useful to see your video. I appreciate your comment about the bonding agent and dye. It's interesting to see people using the rounded edge trowels. I always used the old Marshall square trowels and after a while it had a naturally slightly round corner and a flair to it from use. I used to have buckets of lime putty ready for jobs.... the material just spoke to me and brushing out and troweling was of course challenging but rewarding. Unless you have or develop a knack for it I'm not sure it is something you can explain. For me, the material just spoke to me. Sorry for the ramble..
Thank our. Unsure if you know what tools to use to apply very very stiff lime plaster. Iam having to check with Japanese Jigane trowel, or I cut a piece of hot rolled mild steel and make my own trowel. Mild steel at 2mm thick is stiff blade and grips lime plaster better than stainless or carbon steel. Great real life videos you do. Thanks.
Good video. For me, I'd double up the first wall you did. Leaving it for too long before doubling it will surely result in the first pass pulling, resembling a tearing effect. You don't want the first pass to sit too long, and it's never too quick to make a second pass. For the color change...you want to have your first trowel down before it turns gray, then a second and third trowel after the color darkens. Easier to work with then. Also, square edged trowel...I know Kirk G likes the pool trowels, but they're limited in their uses. Pool trowels tend to be too flexible. A less flexing, more stiff trowel is best. Curry, Marshalltown and Ox make good trowels. Good video, keep up the good work! Steve.
Hi Norest, thanks for the comments. I definately waited a bit too long to double back - however, it worked out perfectly, just needed a little more elbow grease! I have several trowels. The one I used here was a pool trowel by Nella - very ridged. I agree that pool trowels are typically too flexible. Thanks for watching.
Thank you for all the advice and instruction. If the wall was bigger could you have divided it in half and did it over 2 days. Would the product allowed you to touch the seam later
Next time add a teaspoon of Cream of Tartar ( Cooking Spice) in your water mix it up before you add your plaster it will add 30 more mins more to mud setting up...
Gold bond retarder made by National Gypsum is a more reliable product. I've also used soft drinks as a substitute. Orange crush specifically. But be warned if you over do it your diamond will NEVER set. It will just dry out and check crack off the walls and or ceiling.
Hello, thank you for the video. Can you help us with a tip where we can buy veneer plaster in USA? Homedepot and Lowe don't have it in stock and orders take a long time. We have contacted USG and have received no response. a distributor. we are located in Salt Lake City, thank you 🙏
Hi, if the paint is secure, I would use a Diamond Base first, and then Diamond Veneer. Always make sure you're using a bonding agent first. Hope this helps, Shayne
Wonderful video and work! If I'm working by myself on a large wall, can I stop after 12' or so, double back and then continue on the next 12' or will it show where I've stopped and started?
Hi Jennifer, it won't show where you stopped. I plan my 'double back' coat based on timing. You have 60min before Diamond starts to turn hard. I would recommend troweling for 15-20min and then double back.
Thank you for a very helpful video... keep them long and thorough, it's the right way! BTW, can a float or sponge be used instead of the blister brush?
In UK 🇬🇧 we have a different system Although there are similar products to the one you’ve used. Similar products in the UK are you generally only used in jobs where the Architect ( has specified )
Hello! great video.... I just had a couple questions! How do you know when to start layer two ? is layer one a certain consistency at that point that you can check before starting layer two? Also, have you ever tinted the plaster so its a final finish instead of painting over? If so what product do you use?
Hi Shayne. Great video. I'm removing layers of painted over wallpaper to get down to 100 year old plaster walls in my home. Can Diamond Veneer finish be applied directly on top of the old plaster, or do I need to first do some kind of plaster bonder and/or base coat? Thanks!
Hi Tony, yes, Diamond Vereer is an excellent finish coat, but can be a bit challenging to handle unless you're somewhat familiar with using a trowel. Diamond Veneer is primarily gypsum with a little bit of lime and doesn't stick to anything but a properly applied base coat. Saying that, using a plaster/cement bonding adhesive is mandatory if you're not using a base coat. Be aware of pre-existing cracks an flaking paint. These need to be fixed first, and then the adhesive, and then the finish coat. Check out my videos of the Cobblestone Mansion we renovated. The video quality may be poor but you'll get some good information from it. Hope this helps.
Like we say when putting a hard trowel finish on concrete.....make that trowel ring boys! That wall looks great and if the homeowner paints over it, they are insane
They always do(paint over it) and then wonder why it started dying so quickly. Are they going to believe that they smothered it and I couldn't breathe? Of course not. Hard headed folks of the world. Peace.
Hi Are, yes you can. Personally, I wouldn't 'add' it into the compound, however it's amazing to apply it first, and then skim. Hope this helps, and thanks for watching!
I just tried this product for the first time. I figured once I did the first wall I went back and started trawling the wall smoothing it out since it was near drying came out good but did the same mistake going 2 walls ahead
This is beautiful!! I have a few questions. How to you introduce a color to the plaster? How do you repair small scratches or chipped corners when other crews come in to work?
I don't use pigments to colour our finish coats. We either leave them raw or seal & paint them. It also make for a much easier repair from scratches and chips - simply by using drywall or spackling compounds. Hope this helps.
Hey Osoblues, You can, however it really should have a base coat of Diamond Base first - and, you should inspect the taped joints to be sure they are permanently secure. Hope this helps.
Great video. It has helped me tremendously in my first attempt at plastering and using the Diamond Veneer. I know it'll be far from perfect, but what the hay. One of my issues is clean up. When I get ready to clean my tools I find the DV had hardened to where it is the hardest part of the job, the clean up. How do you handle this part? Getting my mixer clean would be easier with C4. 😂
Ah yes. Working with Diamond Veneer - or any plaster for that matter, really needs to be with at least two people. One to do the work, and the other to clean the moment you're done with the tools and before the setting time hits. Just think how good you'll be at cleaning tools! Thanks for watching, Shayne
I have old textured walls and ceilings (swirls). I'm sure the walls have been painted over the years. Am I able to use Diamond Veneer Plaster to smooth out the walls and ceilings? Is the Quickrete bonding adhesive needed or recommended?
Hi Live Life, Diamond is a great product for tackling a task like yours, however, it does take some plastering skill to use. If you're in the trade, then yes. If you're a 'do it yourselfer', then no. In any case, you always need a bonding adhesive. This is like layering a liquide coat of rock that turns into a solid rock - and rocks don't stick to anything. If you're a 'do it yourselfer', then I would recommend two things - either skim coat with drywall compound 3 times, or hang drywall right over your existing textured walls, and finish it accordingly. Hope this help and thanks for watching! Shayne
Thanks for the video! Curious what size trowel and pool trowel you are using? Recommend any particular ones? Also you mentioned not using diamond over joint compound, curious why, does the water damage the joint compound? or an adhesion issue that plasti-weld would solve?
Hi Maxamillion, because Diamond Veneer is gypsum with some lime, it is a stone, therefore has no forgiveness with flexibility. No flexibility equals cracks. If you want to us it over joint compound, the best approach is to apply an adhesive - like Plasti-Weld - and then a base coat of either Structolite or Diamond Base, and then Diamond Veneer as your finish coat. Hope this helps and thanks for watching! Shayne
I did a wall (bonding agent and 1 coat of diamond) and learned a lot...ha...so I want to recoat it. It is less than a week old. Do I coat it with a bonding agent again or just wet it and recoat it? Great video ... very well done.
How about Plaster Weld (pink stuff) to prep wall. I like that you can water trowel it. Looked like you were burnishing it. If skill set for application not 100% I still think its manageable. All depending on the size of area. It's doable for must DIY'ers with half decent skill set. Nice job. I like the explanation on what to see and expect using this product.
If you cannot get diamond veneer plaster, is there a substitute? Can't find it in my area. I like the narration of the video - very good format for an instructional video.
There are several other methods for skim coating. If you're located in North America, you'll find Diamond. It's made by the United States Gypsum Company, also the Canadian Gypsum Company. However, you can also use lime if you don't want to sand - also produced by the same company. Anything else, you'll have to sand it - drywall compounds would be the next best alternative. Thanks for watching!
Great video! Thanks for making! Quick question I hope you can answer: What if you're doing a large wall and can only do it in smaller sections? What happens if the first section is completed and you're ready to start the next? Can you overlap newer diamond over previous? Or do you need to re-apply bonding agent on the previous section before overlapping? Instructions say not to overlap but I'm sure you're encountered this before?
Hi, if you're working into an area that is 'hard, but still wet', you can simply continue with the process. If you're working into an area that is 'hard, and dry', you'll need to coat the edge that your working into with adhesive, and then continue. Thanks for watching! Shayne
Thank you for the video. Is there a reason that you did not use the base veneer product first? I am a first-timer and trying to cover a cement board with plaster (trying to blend one wall of the bathroom where we have installed cement board to the rest of the bathroom that is plaster). USG recommended the base coat first and then moving along to the finish. I realize the bonding agent is key, but am wondering if they are upselling me with the base coat. Thanks again for the great tutorial!
Hi Plembo, they are not upselling you. The reason I didn’t use the base coat is because I didn’t want the extra thickness due to the existing tile base. Diamond Base Coat should be used when you can.
Mate been plastering 27 years and I have 1 tip for you get rid of that pool trowel,its got too much flex in it for skimming or any plastering, get A 13,14 in curry or marshalltown stainless steel trowel 👍
Gypsum is plaster of Paris when calcined in a Kiln at 160. I seen a plasterer in the comments say that gypsum and plaster of Paris or different things. I had to check.
Great work from a master. I’m bout ready to skim coat over subway tile backsplash with fair amt lippage. For ease can I do couple layers of 45 mud to get Venetian type finish. Then add few raised plaster stencil deigns using tile adhesive. Then using couple shades of paint get a faux finish
Hi Paul, it wouldn't be some I would do in terms of coating over tile. However, if that's what you're going to do, a couple of coats of 45 is an excellent base as long as you use the adhesive to bond the plaster coat to the 45 - and stenciling with plaster is OK too. I always use adhesive just to make sure everything bonds. Hope this helps, Shayne stenceling
@@plasterdrywallbyshaynebeda4503 thanks Shayne. Best to learn from a pro so if not advising over tile thought of using decent quality peel&stick vinyl tile onto tiles then do on it? Really wanting stay out of a rabbit hole with this. You mentioned doing the 45 then using adhesive for plaster coat, what do you recommend using for plaster. For a guy who’s built 20+ homes gotta say this be humiliating! All I’m really wanting is a soft polished faux suade look with couple shades of paint mimicking venetian plaster. There’s barely enough room in 12” backsplash for my trowel. Think it was a vid of yours using a float swirling in circles. Planning to sell my place once finishing so how what product would you use to cover the tile? Is stuccolite option?
@@paulstephens9274 if you want something that will last without removing the tiles, I would glue (PL Premium) 1/4" drywall over the tile and then finish is as drywall, and then apply what ever finish you like. If that's not acceptable, you could OIL prime the tiles, and then fill in the grout lines with 45, and then prime, and then apply whatever finish you like after that. Shayne
@@plasterdrywallbyshaynebeda4503 ok cool. Btw your responding a sign of true professionalism hope others recognize this! And much appreciated. Wish you were in Denver. With countertop attached BP depth an issue adding another 1/4”+ drywall so like other option. Initially primed tile with Kilz then coat acrylic paint. Very solid as witnessed when sanding. Quick question Shayne will this suffice in avoidingneed to prime again? Onwards&upwards
@@paulstephens9274 thanks for the good words. If you've already done the oil prime (Kilz) and painted it, then I would consider going back to your original plan with a skim coat as a base - but I would use Durabond 90. Durabond is a 'high dense' material opposed to the others of medium or low dense materials. Any time you apply a material over a surface, it will need to be primed. Prime is a sealer and allows the absorption of paint to be consistent therefore reflecting the colour (yes, it's colour, not color!) evenly. I'm probably making this more difficult than it really is.
What if we have to mix the paste ourselves? What should be the percentage of lime, and gypsum (and what finnes of gypsum) for bathroom walls as finishing veneer coat over natural hydrolic lime plastering? We don't have ready mixed bags. Or they are very expensive.
Hi, thanks for asking. Purchasing 'ready to go' bags of material is always more expensive, however you get the convenience speed. Mixing your own material should only be done if your experienced in the trade. We use about 70% Double Hydrated Lime, and about 30% Gauging Plaster. These are mixed separately and then blended. If you're not familiar with Lime, you should stay away from it - especially if it's dehydrated lime (or hot lime). You need to know the difference. Hope this helps, Shayne
@@plasterdrywallbyshaynebeda4503 very true, though I would imagine it would leave about the same surface as this veneer coat does after water sanding it down. I've never used veneer, though, so I can't say.
One plasterer to another I've found using a small hand held garden sprayer to wet the wall let's you manage the wall a little closer without continuous dipping of the blister brush. Have you tried it?
Funny you mention that, I’m using a sprayer today for a cove a wall we built. I like the blister brush because it’s more dramatic 😉! Thanks for watching!
Is this the equivelant of multi finish in England? I’m debating getting one of those grit brushes instead of using a 6 inch splash brush, look way better
Hi Nikthegreekcypriot, I'm not sure of the chemical make up of Multi Finish, but it seems to have some bonding characteristics added. Diamond Veneer Plaster is made up of only two materials - Gypsum & Lime. You'll need to use Diamond Base Coat before the Veneer. I didn't use it in this video because I needed to keep my finish coat very thin and thought it would be a good example of how to use the product besides traditional plastering. Hope this helps, Shayne PS. The brush I'm using is called a Blister Brush, or Felt Brush.
Hi, thanks for this vid. As a diyer, what mix of lime to gauging plaster would you recommend to give me time to make it really look nice. In my area we don't have diamond and the 45 min time scares me. Also for lime plaster is it just type s hydrated lime?
Hi JL, if you don't have any experience with a hawk & trowel, I don't think you should be trying any plastering products. Using Lime & Gypsum doesn't give you more time. It is more 'forgiving' and easier to work with. You will also have a curing time of at least 30 days before you can paint, but it may even take up to a year for lime to truly cure. Saying all that, I mix my Lime & 45 minute Gypsum Gauging plaster to about 60-70% Lime to 30-40% Gypsum. You should watch some other videos on how to mix plaster this way. Alternatively, you could use Durabond 90, and then drywall compounds for a repair. At least you'll be able to sand it out. There's no sanding Lime & Gypsum. Hope this helps, Shayne
There is nothing like experience with plaster and when I was picking it up from the Waldens it wasn't like there was a formula. We put a pile of lime putty on the board and and made a donut, filled the hole with water, added plaster, mixed it well and then combined it with the putty. There is not time to relax. Once you start you have to finish. There is a little time between troweling and then finishing it with the felt brush and your final troweling. It's not easy work. It took a long time to dry. We used to wait at least 11 days before it was dry. The finish is so nice it didn't matter if you painted it right away or not. Of course we live in a different time where speed is valued more than the beautiful plaster finish.@@plasterdrywallbyshaynebeda4503
Hi Susan, good question - I did not. If you notice in the video this wall was already structurally finished. I just decorated it by making it smooth. To prevent any failures, I used an adhesive to be sure that the material I applied permanently bonded. Hope this helps, Shayne
Hi there! Thanks for the excellent and thorough video! I’m a general contractor and if I may ask, what is the approximate price difference skim coating with this veneer plaster vs regular mud? Is it feasible to do an entire house with this for level 5 finish?
This video is an example of what's possible with Diamond Veneer Finish Coat. To do an entire room, or home is a different method... The room must be lathed with Plaster Board (Blue), and then taped with self-sticking fiberglass tape, and then a base coat of Diamond Base Coat, and then Diamond Veneer Finish Coat. And, it requires a much higher skill level. To answer your question, it will most likely cost about 10X higher than standard drywall methods. However, the result beautiful and superior! Hope this helps, Shayne
Gréât vidéo and learned lots. I live in an apt that was built in 1910. Most walls are plaster except for a closet that was added to my foyer in the 1980’s. The closet has drywall that I would like to skim coat with Diamond veneer plaster in order to match the rest of the walls. Any insight or tips would be greatly appreciated!
Hi Antoinea, the best method would be to apply a bonding agent, and then a Diamond Base Coat, and the Diamond Veneer finish coat. Hope this helps. Shayne
Thank you sir! For the base coat would you recommend Structolite or Diamond venger base coat? I alps noticed that your video you apply veneer plaster right on top without any vase coat. Is the base coat step required or not just optional.
@@antoinea.jaoude4504 I didn’t use a base coat for this particular application because it was an already finished wall with tile base. Any other application, I would use either Structolite or Diamond Base.
Thanks Shayne, I really appreciate your response. the wall I would like to skim coat has a baseboard. I am a little bit concerned adding base coat layers and plaster veneer finishing coat might make the wall way too thick protruding outside the baseboard.
What is the ideal time to wait before doubling back? What does the plaster look/feel like at this point? How long after the double back is ideal to wait before water troweling? What does the plaster look/feel like at this point?
Hi Matthew, my suggestion would be to watch the video again and you'll find some answers, and then do some experimenting. Handling the material is the only real way to learn. Hope this helps.
Thank you for sharing this video. The details you include in the narrative and the camera work and angles helped me immensely to take on and accomplish a remodel job where the homeowners wanted a diamond veneer finish as opposed to drywall joint compound (my greater experience). I used both a square trowel and a pool trowel for the application and found the pool trowel much better for me to work with, except the corner areas of course. Would you please tell me where I can find the the type of work lights you use? Thanks again and much respect.
Would you say that venetian plaster would have been a better choice for this kitchen sir? A little more material, couple of coats ane a couple of thousand dollars more. Either way you did an awesome job looks great. 👏
Hello I ran into a snag, when I applied my second pass I waited about 20 minutes however my product didn't go on smooth and my product started to turn gray to quickly, so I wet-troweled what I could as fast as I could before the product hardened but I didn't get to the entire wall in time. Did I wait too long for my second pass and how do I correct this after the product cures? The bottom of the wall is fairly smooth the top o the wall is rough.
Hi LaShell, You can do two things. Either use drywall compound (adhesive isn't necessary) and coat the entire area, and then sand it. Or, apply a coat of adhesive and apply another coat of Diamond. It sounds like the Diamond Veneer your using is either old or hasn't been climate controlled. Once humidity starts to get in the product, it will speed up the setting time. Hope this helps, and thanks for watching. Shayne
Hi and thank you for the question! Yes, that's exactly how it looks - blotchy gray. Most of the time we're painting the surface afterwards, but some people - including me - like the look of the 'artisan' finish. It resembles Venetian plaster a bit. I always recommend painting afterwards. Hope this helps.
Hi Jacob, all our work is small and mostly repair. We typically us Struco-lite instead of Red Top gypsum because it's easier to mix and handle on the types of jobs we do. I haven't used Keenes, but would if I needed the open working time to complete a project - and we rarely come across sanded finishes in our area - everything is troweled to a smooth finish. Diamond Veneer is my favourite product because of the little amount of lime, and that allows for next day painting instead of waiting for the lime to cure. Thanks for supporting me!
Hi Urpapi4life87, plaster cove work can be tricky. You can use Diamond for this, however it gets really hard and if you were to have made a mistake, you can't sand it down. I would suggest fixing them with a plaster/cement bonding adhesive, Durabond 90, and then a skim of drywall compound. This way you can shape the contour with sanding if needed. Hope this helps.
This may seem odd but I’ve been working with a small painting and drywall company for around 4 years now and I’ve come to love the big yellow sponges in the flooring sections of Home Depot/Lowe’s, would that work just as well in this process?
Hi Charlie, thank you for subscribing and watching! The reason I don't use a sponge is that they drip too much. I would instead use a spray bottle and mist the areas that need to be water troweled. The advantage to using a felt brush is that it aids in the 'wet sanding' process. Hope this helps.
Hi Steve, USG, or here in Canada it's CGC is the UNITED STATES GYPSUM COMPANY, and they are HUGE! I'm sure if you went to any building supply company they could order it in for you. I need to purchase our supplies by the skid in most cases because plaster is being taken over by drywall and its methods. If you're having a hard time finding a supplier, give USG a call. You'll find their phone number on their website. They are happy to help.
Hello, Diamond Veneer should be used over 'grand prix plaster board'. However, it can be used over drywall using proper preparation... coat the entire surface with a PVA adhesive/plaster bonder, and then tape coat with Diamond BASE, and then coat with Diamond Veneer. The video you watched is an example of 'experimentation' with the product. Thanks for watching!
Hi Tammy, if you could imaging that because Diamond Veneer is gypsum, and gypsum is a stone, you will need to coat your work with PVA - Polyvinyl Acetate- to allow your new coat to adhere. Gypsum won’t stick to dry gypsum. Once you apply the PCA, you’re good to go with another layer of Diamond- or any other product you want to use. I would apply an ultra thin coat, and then double back with another ultra thin coat. Hope this helps. Sometimes it’s hard to explain unless we’re hands on.
Hi James, yes, but your really should be using a gypsum base coat first - Diamond Base, and then Diamond Veneer. Don't forget to always use adhesive! Thanks for watching, Shayne
I don't think this method is the best choice to skim over popcorn texture. My first suggestion would be to hang drywall right over the existing ceiling, and then tape and finish it. My next option would be to skim it 3 X with drywall compound. Hope this helps.
Definitely - adhesive is the magic potion! Over brick, I would use a base coat of structolite, and then a finish coat of Diamond Veneer or even drywall compound would work great.
I intend to add a diamond veneer skim coat over existing plaster. I have closed in a couple of doors with sheetrock and have brought everything level with the existing plaster with stuctolite. The existing plaster finish is old world and my intent is to plaster weld and apply diamond veneer without a base coat. I am okay with it having an imperfect smooth look. You stated in the comments that a base coat is preferred but is it necessary for my application?
Hi David, you will be fine applying Diamond Veneer over your existing plaster. The base coat is only required if you're planning on going over unfinished plaster board or drywall. Thanks for watching! Shayne
Hi Kyle, Diamond would make hand great textures. I would use a sheet of drywall, apply some PVA (cement bonding adhesive), and then experiment with the Diamond. In fact, if you're self-employed in the trade, you could make several 2'x2' panels of MDF ( with the PVA) and create your own signature hand textures to sell. Hope this helps.
Hi Phillips Property Maintenance, Yes you can, however would make some adjustments... Hang the board, tape it with Durabond 90 Type Setting Compound, apply PVA/Cement Bonding Adhesive/Plaster Bonding Adhesive, apply a base coat of Diamond Veneer Base, and then apply the Diamond Veneer Finish Coat. This will give you a professional result. If you choose to apply it right over standard drywall, at least apply the PVA first. I would be concerned about future cracking but it may not. Hope this helps and thanks for watching!
Great video. Im from the UK and this seems to be the closest product ive seen to multi finish thistle. Can this product be applied directly to new drywall surface without bonding adhesive application? Cheers
No, it won’t ‘stick’ or have the strength to stand the rest of time. You need a base coat of plaster bonding adhesive first - or use plaster board instead of drywall - and then Diamond Base, and then Diamond Veneer plaster. Hope this helps.
I am also from the UK looking for a product close to thistle multi finish. Can I ask what you thought on compassion after using this diamond from this video? I am hoping to use it on to sheet rock. (Gyproc) is what i know it as and fibre tape the joints as normal. I was thinking size the wall in water down with pva glue as I normally would 10 mins before applying it. My method I was going to 1st coat it let it take up a good bit and then do a 2nd coat when it doesn’t dent in by a finger’s press and then just polish it up with a with a bit of pressure take out the glut and mist just using my plastic refina flexi trowel when its ready. To see if it works the same way. I was thinking to just try it out in my sub basement so its purely for a trail run just 1 wall as a test patch to see the result. Thanks for any insight you can give me
I'm so keen to try this but worried about timing. Would love to know if walls/ceiling can be done in sections for those of us who might not be able to do a wall fast enough.
once you start working with plaster you'll see when it is workable or not. It's a very intuitive material. You'll just end up throwing some out. Once it starts to set it's kind of obvious. Just stop and start cleaning up. Never let it sit, clean up right away before it sets. Another thing is that if you don't have really clean tools and buckets when you start mixing a new batch it can accelerate the set time. Once you do that once or twice you'll never do it again. I used to mix it on a half sheet of plywood on some saw horses....
@@plasterdrywallbyshaynebeda4503thanks for the reply. I was thinking more in terms of days. Can I do sections of a wall or ceiling one day and continue on a future date? :)
Diamond Veneer is great over Structo Lite! If your Structo base is dry, you'll have to apply some plaster bonding adhesive to make the Diamond stick. If you're Structo is hard but still wet, I leave the troweled face 'open', not smooth, and then apply the Diamond. If it's wet and smooth, I would still use some adhesive to make sure the Diamond bonds. Hope this helps.
Hi Ramon, using the bonding agent over paint is exactly what I did in this video and the result was great. However, if the base wasn't installed, I would have applied the adhesive, and then a base coat of Diamond Base, and then a finish coat of Diamond Veneer. Hope this helps.
Yippy! I found the answer to my question! My plan is to do a venetian style treatment on my floor then clearcoat with epoxy. It's the old " makeup on a pig" solution. Hehe
How similar is this brand to plaster of Paris? I can’t source plaster of Paris in my area but the diamond veneer is available.. does it dry very quickly as well if we add cement and sand to the mix?
I wouldn't use Diamond the same way you use Quickset plaster (Plaster of Paris). Diamond is a finish coat all on its own - and gets harder than Quickset plaster. If Diamond is available, then Quickset must be as well. They come from the same company. I would call USG/CGC and ask them where you can get Quickset. They will have a list of dealers in your area. And, if you really can't get Quickset Plaster, then experiment with Diamond. I've never done it. Hope this helps, Shayne
Would you use a pool trowel to apply a skim coat plaster containing lime and silica sand ? Which is a good Pool trowel ? What is the procedure to apply the skim coat ? How would you apply a very very very stiff almost 'water free' lime base coat e.g. 8x3 inch Midget trowel or a Japanese Jigane trowel or other ?thank you for your help.
Hi DRJMF1, I use two types of trowels for all my work - pool trowels and standard rectangular finish trowels. The stiffer the material your using, the stiffer the trowel must be. My pool trowels are Curry (very flexible blade) and Nella (much stiffer blade). I use a multitude of finish trowels but my main finish trowel is Nella. I use a pool trowel anywhere I would use a finish trowel - they're more forgiving. However, that doesn't mean I don't use my finishing trowels. Determining which trowel is the best one for the occasion comes with experience. I can't tell you which one to use, only the ones I use on a specific repair. Hope this helps, Shayne
@@plasterdrywallbyshaynebeda4503 Yes, agree thanks. I have vertical hardwood wall beading every 2ft to simplify the plastering ob, these will stay on the wall. What size of finishing float would be ok to skim across the 2ft sections of wall span ? Would a smaller midget trowel work better e.g. Refina pointed midget trowel ?
@@DRJMF1 In this case, I would simply use my 14" Nella Finishing Trowel. However, if a pointed trowel is what you have, go ahead. If you have a choice, use a standard finishing trowel.
we are starting with a LEVEL #5 drywall finish. We applied the QUIKCRETE BONDING ADHESIVE as recommended then we will apply the Diamond Veer. Does this work. We Appreciate it very much! Mike
appreciate the amazing response!!! the "base" to the level 5 dry wall is it because the drywall sucks out the water so less working time. (i guess the main reason) thank you!!
Diamond Veneer is a ‘plastering’ method, not a drywall method. Level 5 should be completed with ‘drywall’ products. Diamond will not have any flexibility and therefore can crack if the ‘base’ isn’t solid enough. Drywall compounds have ‘some’ flexibility, therefore no need for a base coat. Hope this helps.
Very nice, there are so few videos about working with Diamond Veneer outside of Kirk Giordano, and his method is very unorthodox: he doesn't double back a second coat or water trowel, and I am not sure how he is smoothing out his wet plaster without tearing a bunch of it off, which is what happened when I tried it. I do wish you had shown more about how you worked around that outlet, especially the narrowest part underneath it. One issue I have had is my Diamond is curing a bit chalky, and can be scratched with a fingernail. My only thoughts are I used too much water while smoothing, or over troweled while it was still wet, or maybe spread it too thin, would any of those cause this problem?
Hi Paul, first off, thanks for supporting my new endeavour! Kirk seems to be a great rough plasterer - lathing and base coats - but nothing more than that. Overworking the Diamond finish with too much water will make it a bit chalky. Diamond Veneer is mostly gypsum and the reason it gets a bit chalky. I used standard taping knives around the receptacle. As I learn how to present this kind of work, I’ll pay more attention to those small details that make a big difference.
No disrespect when I make my comment. I would give you a passing grade. Although Kirk falls short of quality and at times I think he’s makes things up as he goes. In this video you show the basics and even mention a base coat layer which I would have probably have done. Applying a base coat does two thing right out of the gate. First is will help fill out with the faux brick and second it will give your finish coat a little suction that will provide a better finish. I notice like Kirk you use a pool trowel. I have to say I never ever have used a pool trowel in 35 years. Use a plaster trowel for plaster. Try it I promise you will find better control. A pool towel flexes to much on the end (toe and heel) and it’s huge. Start on the left side work to the right. Then reapply a second coat using the same product, but never use fresh over old. Smooth it out the best you can ten wait. It tends to turn color and looses its sheen. You should never be able to put your fingernail into diamond. I have a feeling you “killed” the set caused by over working it. It probably even peeled on you. It’s ok though. I like to see homeowners get their hands dirty but plaster can be evil and difficult to say the least. You used a real plaster mop. Usually that is used at the end of your last troweling. During the troweling process use a large 9” bristle brush. I would have set the tape back 1/8” as well. It’s a bit to close. And if you try using a throw a way brush at the corners and base will give a clean finished look. Also, auto clave lime finish plaster actually never sets, it needs the aid of molding plaster or gauging plaster. At the end of the day you did a ok job. On the next one shine a light on an angle while you trowel. This can aid in laying down your finish real smooth.
Hi Kirill, I haven't used 'microcements'. I would venture to guess that microcements cost more because they are produced with several ingredients to accomplish result. Whereas Diamond Veneer is simply gypsum with a little bit of lime - and about $30 per bag (that's Canadian). Other than that, I don't have a good answer for you. Thanks for watching!
@@plasterdrywallbyshaynebeda4503 But it looks so elegant, especially after you water troweled it. Why can't we seal and enjoy it? Or add a pigment for example. I just bought a bag of diamond, gonna mess with it tomorrow, really excited to try this stuff.
Hi JQ, once Diamond is mixed, you have about 1 hour to complete the task - including your double back coat. 20 - 30 minutes is a good time frame to start your double back.
I NEED HELP!!!!! Could anyone tell me if i can use plaster of paris instead of diamond veneer plaster? Diamond veneer plaster is no where to bought anywhere near me and can not be ordered.
Hi Jen, you can, however you’ll need to add some lime to it - and if you’re not a professional, I would advise not to use this method. Instead, you could use a fast setting compound from USG/CGC like Sheetrock 20,45,or 90. These products get hard but you can still sand them. May need a couple of coats. Hope this helps, Shayne
Why don't you lightly sand the plaster to make sure it is smooth prior to applying the plaster binder? Also why don't you use a wide skimming blade initially before using the finishing trowel?
Thanks for asking! Yes you can. There's a couple things to consider. 1. Cracks in the concrete. This will not fix cracks and the crack will find it's way right through the Veneer. You should be sure to fix any concrete crack first. 2. It's always better to use the Diamond Base Coat first, and then the Diamond Veneer. The only reason you didn't see me use it in this video is because I didn't want to loose the return depth on the tile base transition. Hope this helps, Shayne
@@berrisbogle My method would be to coat all the joints with cement bonding adhesive, and then tape them with fiberglass tape and Durabond 90 (not to be confused with other fast setting 90 min compounds), and then a base coat of Diamond Base, and then a beautiful coat of Diamond Veneer.
Hello Kaceestagg, this finish is meant to be painted, however my customer is choosing to leave it the way it is for a while. I'm sure you could seal it with anything you like. Thanks for watching!
Finally working on my bathroom. Thought about diamond coat. Been in plaster for 17 years and never have done it on any job.
This is the best how to video I’ve ever seen in my life. Thanks ✌️
Thanks for the compliment and thanks for watching Sean!
Shayne
Awesome video sir I appreciate taking time in your day to share this with us what a great learning experience
Asmr vibes, the sound is very helpful indeed, fascinating process and a very well made video, well thought out
Love it... I have never used Diamond Veneer Plaster but it looks like I should have been doing this from the beginning...
I appreciate you, and thanks for watching! Shayne
I love that you provided the extra camera time, I agree and dislike construction video magic, so many questions arise.
Thank you, and thanks for watching!
RIGHT, I would rather have too much info.. then not enough.
I have been doing this for years and I still love watching good videos. Looking forward to what you are gonna do in 2022
Thanks for watch Al.
Gypsum and plaster of paris are completely different products.
Plaster of paris may well be used as an excilerator in this product, and can be used as such with drywall spackeling compound as well.
The dry mix quick set drywall mixes are simply dry mix spackle with various amounts of Plaster of paris mixed in based upon the desired set up time.
The felt brushes are fine for brushing over the finish product in order to make a more uniform look.
But back in the day we used 10” bristle brushes for trowling.
We used soaked lime mixed with gauging plaster and applied over a gypsum brown coat.
So as an old plasterer, i will say you did pretty well on this job.
Hi Ernie, thanks for the comment. We use lime and gauging plaster too, just not this application. Diamond has a ratio of gypsum and lime, but only about 30% lime making it a faster finish to paint.
I'm so glad I found your channel. Im a professional painter and artist. I've decided that I'm going to learn plastering more as an artistic finish. You explain things so well. Thank you.
Thanks Shintangle, plaster is a great medium to create art. All I can do is make walls flat!
@@plasterdrywallbyshaynebeda4503 That's a damn art, IMO.
Showing the mistakes is so helpful. Ty.
Great video. My company paints, drywall’s, and plasters.
It’s fun to see others do exactly what we do. I subscribed and I’m looking forward to watching more.
Hi Steve, thanks for watching! We have big plans for these videos and will be posting more in the next couple of months. It's a challenging trade because of all the variables you'll come across on a single project - and that's what make you and I more experienced than the rest!
That's cool. We have different guys for it all. I can paint but prefer to do drywall finishing. Trying to teach myself plastering! Super excited.
Please do not paint plaster. Over three millennium in service to us as wall a finish, one thing I have learned in my 50 years is DONT PAINT PLASTER- STUCCO- OR SHOT CRETE.
If there's something recently discovered that changed the game with our old friend Plaster, feel free to correct me. PAINT MURDERS PLASTER. No good can come from that.
Long time Lather
Plaster's best buddy.
Peace.
Great walkthrough! tyfs
Good to see an old A’burg boy showing how it’s done 💪💪👌
Ah, thanks! And thanks for watching!
Very Indepth video. Good job.
Thank you so much for the great video. I like diamond and main reason was no dust . joe
Fantastic, thanks for sharing!!
I'm a little uncomfortable referring to you as 'Big Daddy'... Thanks for the feedback!
nice. years ago I did some plastering after picking up some tips from Walter and Wally Walden (SP?) in Philadelphia. I believe they used sheep shit for a retarding agent when they used one. They started with a pile of sand and plaster for a base coat. They were like third generation plasterers. They were simply incredible. I did 3 coat plaster pretty well but never achieved their level of speed. They were real artists and I was simply an imitator. I used to buy plaster lathe and soak it in water on occasion but mostly used wire. Fast forward 34 years and I have to do some repair work in our basement and really I've never used a Diamond finish so it was useful to see your video. I appreciate your comment about the bonding agent and dye. It's interesting to see people using the rounded edge trowels. I always used the old Marshall square trowels and after a while it had a naturally slightly round corner and a flair to it from use. I used to have buckets of lime putty ready for jobs.... the material just spoke to me and brushing out and troweling was of course challenging but rewarding. Unless you have or develop a knack for it I'm not sure it is something you can explain. For me, the material just spoke to me. Sorry for the ramble..
Ah, brushing plaster is definitely rewarding.
Thank our. Unsure if you know what tools to use to apply very very stiff lime plaster. Iam having to check with Japanese Jigane trowel, or I cut a piece of hot rolled mild steel and make my own trowel. Mild steel at 2mm thick is stiff blade and grips lime plaster better than stainless or carbon steel. Great real life videos you do. Thanks.
Great video man
Thanx for your video...but ya still have a lot to learn ✌️
Good video. For me, I'd double up the first wall you did. Leaving it for too long before doubling it will surely result in the first pass pulling, resembling a tearing effect. You don't want the first pass to sit too long, and it's never too quick to make a second pass. For the color change...you want to have your first trowel down before it turns gray, then a second and third trowel after the color darkens. Easier to work with then. Also, square edged trowel...I know Kirk G likes the pool trowels, but they're limited in their uses. Pool trowels tend to be too flexible. A less flexing, more stiff trowel is best. Curry, Marshalltown and Ox make good trowels. Good video, keep up the good work!
Steve.
Hi Norest, thanks for the comments. I definately waited a bit too long to double back - however, it worked out perfectly, just needed a little more elbow grease!
I have several trowels. The one I used here was a pool trowel by Nella - very ridged. I agree that pool trowels are typically too flexible.
Thanks for watching.
Looks great
Thank you for all the advice and instruction. If the wall was bigger could you have divided it in half and did it over 2 days. Would the product allowed you to touch the seam later
Good stuff. Thank you!
Thanks for the feed-back!
Amazing job
Thanks Christopher!
Thank you! I learned a lot!
Thanks for watching. And glad you’re on my side! 💪🏽
Next time add a teaspoon of Cream of Tartar ( Cooking Spice) in your water mix it up before you add your plaster it will add 30 more mins more to mud setting up...
Ah yes, that’s a great idea. I’ll make a future video with that method. Thanks for the tip!
Gold bond retarder made by National Gypsum is a more reliable product. I've also used soft drinks as a substitute. Orange crush specifically. But be warned if you over do it your diamond will NEVER set. It will just dry out and check crack off the walls and or ceiling.
bad idea. i listened to this bad advise. it prevents the mud from ever curing properly. it drys out and hardens but it loses all integrity
Hello,
thank you for the video.
Can you help us with a tip where we can buy veneer plaster in USA?
Homedepot and Lowe don't have it in stock and orders take a long time.
We have contacted USG and have received no response.
a distributor.
we are located in Salt Lake City,
thank you 🙏
@@niememij7790 order from homedepot
Great, informative vid. Thank you. Could you use the Diamond product to plaster over a painted brick fireplace?
Hi, if the paint is secure, I would use a Diamond Base first, and then Diamond Veneer. Always make sure you're using a bonding agent first.
Hope this helps, Shayne
Thanks to you, I have learned. Thank you very much, I have been working for a year now.
Glad to hear!
what state do you live in
Ny Bigemtone
@@user-gd8ym4ew5z I'm located in Canada - the great white north!
Wonderful video and work! If I'm working by myself on a large wall, can I stop after 12' or so, double back and then continue on the next 12' or will it show where I've stopped and started?
Hi Jennifer, it won't show where you stopped. I plan my 'double back' coat based on timing. You have 60min before Diamond starts to turn hard. I would recommend troweling for 15-20min and then double back.
Thank you for a very helpful video... keep them long and thorough, it's the right way!
BTW, can a float or sponge be used instead of the blister brush?
Great question- possibly. Diamond gets so hard that a trigger sprayer and trowel would be better.
In UK 🇬🇧 we have a different system
Although there are similar products to the one you’ve used.
Similar products in the UK are you generally only used in jobs where the Architect ( has specified )
Hello! great video.... I just had a couple questions! How do you know when to start layer two ? is layer one a certain consistency at that point that you can check before starting layer two? Also, have you ever tinted the plaster so its a final finish instead of painting over? If so what product do you use?
Hi Shayne. Great video. I'm removing layers of painted over wallpaper to get down to 100 year old plaster walls in my home. Can Diamond Veneer finish be applied directly on top of the old plaster, or do I need to first do some kind of plaster bonder and/or base coat? Thanks!
Hi Tony, yes, Diamond Vereer is an excellent finish coat, but can be a bit challenging to handle unless you're somewhat familiar with using a trowel. Diamond Veneer is primarily gypsum with a little bit of lime and doesn't stick to anything but a properly applied base coat. Saying that, using a plaster/cement bonding adhesive is mandatory if you're not using a base coat. Be aware of pre-existing cracks an flaking paint. These need to be fixed first, and then the adhesive, and then the finish coat. Check out my videos of the Cobblestone Mansion we renovated. The video quality may be poor but you'll get some good information from it.
Hope this helps.
Like we say when putting a hard trowel finish on concrete.....make that trowel ring boys!
That wall looks great and if the homeowner paints over it, they are insane
Thanks! I completely agree - it should stay unpainted.
They always do(paint over it) and then wonder why it started dying so quickly. Are they going to believe that they smothered it and I couldn't breathe? Of course not. Hard headed folks of the world.
Peace.
" make the wall shine " cheers
hello great video ,quick question can we use that same quickrete bonder with a joint compound skim coat as well , thanks
Hi Are, yes you can. Personally, I wouldn't 'add' it into the compound, however it's amazing to apply it first, and then skim.
Hope this helps, and thanks for watching!
I just tried this product for the first time. I figured once I did the first wall I went back and started trawling the wall smoothing it out since it was near drying came out good but did the same mistake going 2 walls ahead
That’s how we learn. Thanks for watching!
Could you not use a smoothing blade to achieve a faster smoother finish?
This is beautiful!! I have a few questions. How to you introduce a color to the plaster? How do you repair small scratches or chipped corners when other crews come in to work?
I don't use pigments to colour our finish coats. We either leave them raw or seal & paint them. It also make for a much easier repair from scratches and chips - simply by using drywall or spackling compounds. Hope this helps.
@Patrick Radoszewski a sealer is better than primer, and typically interior/exterior. Your paint store will let you know what’s available in a sealer.
great job! say you have painted drywall that’s pretty beat up and old. can i use this method instead of drywall mud skimming ?
Hey Osoblues, You can, however it really should have a base coat of Diamond Base first - and, you should inspect the taped joints to be sure they are permanently secure. Hope this helps.
Great video. It has helped me tremendously in my first attempt at plastering and using the Diamond Veneer. I know it'll be far from perfect, but what the hay. One of my issues is clean up. When I get ready to clean my tools I find the DV had hardened to where it is the hardest part of the job, the clean up. How do you handle this part? Getting my mixer clean would be easier with C4. 😂
Ah yes. Working with Diamond Veneer - or any plaster for that matter, really needs to be with at least two people. One to do the work, and the other to clean the moment you're done with the tools and before the setting time hits. Just think how good you'll be at cleaning tools!
Thanks for watching, Shayne
I have old textured walls and ceilings (swirls). I'm sure the walls have been painted over the years. Am I able to use Diamond Veneer Plaster to smooth out the walls and ceilings? Is the Quickrete bonding adhesive needed or recommended?
Hi Live Life, Diamond is a great product for tackling a task like yours, however, it does take some plastering skill to use. If you're in the trade, then yes. If you're a 'do it yourselfer', then no. In any case, you always need a bonding adhesive. This is like layering a liquide coat of rock that turns into a solid rock - and rocks don't stick to anything. If you're a 'do it yourselfer', then I would recommend two things - either skim coat with drywall compound 3 times, or hang drywall right over your existing textured walls, and finish it accordingly.
Hope this help and thanks for watching! Shayne
Thanks for the video! Curious what size trowel and pool trowel you are using? Recommend any particular ones? Also you mentioned not using diamond over joint compound, curious why, does the water damage the joint compound? or an adhesion issue that plasti-weld would solve?
Hi Maxamillion, because Diamond Veneer is gypsum with some lime, it is a stone, therefore has no forgiveness with flexibility. No flexibility equals cracks. If you want to us it over joint compound, the best approach is to apply an adhesive - like Plasti-Weld - and then a base coat of either Structolite or Diamond Base, and then Diamond Veneer as your finish coat.
Hope this helps and thanks for watching! Shayne
I did a wall (bonding agent and 1 coat of diamond) and learned a lot...ha...so I want to recoat it. It is less than a week old. Do I coat it with a bonding agent again or just wet it and recoat it?
Great video ... very well done.
Bonding agent for sure. Glad you tried it!
How about Plaster Weld (pink stuff) to prep wall. I like that you can water trowel it. Looked like you were burnishing it. If skill set for application not 100% I still think its manageable. All depending on the size of area. It's doable for must DIY'ers with half decent skill set. Nice job. I like the explanation on what to see and expect using this product.
Hi JD, Plaster Weld would be excellent! Thanks for watching.
Thank you
thank you !!
Thanks for watching!
If you cannot get diamond veneer plaster, is there a substitute? Can't find it in my area. I like the narration of the video - very good format for an instructional video.
There are several other methods for skim coating. If you're located in North America, you'll find Diamond. It's made by the United States Gypsum Company, also the Canadian Gypsum Company.
However, you can also use lime if you don't want to sand - also produced by the same company. Anything else, you'll have to sand it - drywall compounds would be the next best alternative.
Thanks for watching!
Apex plaster made by USG or Excalibur made by National.
Great video! Thanks for making! Quick question I hope you can answer: What if you're doing a large wall and can only do it in smaller sections? What happens if the first section is completed and you're ready to start the next? Can you overlap newer diamond over previous? Or do you need to re-apply bonding agent on the previous section before overlapping? Instructions say not to overlap but I'm sure you're encountered this before?
Hi, if you're working into an area that is 'hard, but still wet', you can simply continue with the process. If you're working into an area that is 'hard, and dry', you'll need to coat the edge that your working into with adhesive, and then continue. Thanks for watching! Shayne
Wow, Thank you, sir for such a fast reply! Excellent. @@plasterdrywallbyshaynebeda4503
Thank you for the video. Is there a reason that you did not use the base veneer product first? I am a first-timer and trying to cover a cement board with plaster (trying to blend one wall of the bathroom where we have installed cement board to the rest of the bathroom that is plaster). USG recommended the base coat first and then moving along to the finish. I realize the bonding agent is key, but am wondering if they are upselling me with the base coat. Thanks again for the great tutorial!
Hi Plembo, they are not upselling you. The reason I didn’t use the base coat is because I didn’t want the extra thickness due to the existing tile base. Diamond Base Coat should be used when you can.
@@plasterdrywallbyshaynebeda4503 Thank you Shayne! Thanks again for the video and keep up the beautiful work!
Mate been plastering 27 years and I have 1 tip for you get rid of that pool trowel,its got too much flex in it for skimming or any plastering, get
A 13,14 in curry or marshalltown stainless steel trowel 👍
Thanks, the Nella Pool trowel is very stiff. I know, it’s cheating a bit using a pool trowel. Thanks for watching!
Gypsum is plaster of Paris when calcined in a Kiln at 160. I seen a plasterer in the comments say that gypsum and plaster of Paris or different things. I had to check.
Great work from a master. I’m bout ready to skim coat over subway tile backsplash with fair amt lippage. For ease can I do couple layers of 45 mud to get Venetian type finish. Then add few raised plaster stencil deigns using tile adhesive. Then using couple shades of paint get a faux finish
Hi Paul, it wouldn't be some I would do in terms of coating over tile. However, if that's what you're going to do, a couple of coats of 45 is an excellent base as long as you use the adhesive to bond the plaster coat to the 45 - and stenciling with plaster is OK too. I always use adhesive just to make sure everything bonds.
Hope this helps, Shayne
stenceling
@@plasterdrywallbyshaynebeda4503 thanks Shayne. Best to learn from a pro so if not advising over tile thought of using decent quality peel&stick vinyl tile onto tiles then do on it? Really wanting stay out of a rabbit hole with this. You mentioned doing the 45 then using adhesive for plaster coat, what do you recommend using for plaster. For a guy who’s built 20+ homes gotta say this be humiliating! All I’m really wanting is a soft polished faux suade look with couple shades of paint mimicking venetian plaster. There’s barely enough room in 12” backsplash for my trowel. Think it was a vid of yours using a float swirling in circles. Planning to sell my place once finishing so how what product would you use to cover the tile? Is stuccolite option?
@@paulstephens9274 if you want something that will last without removing the tiles, I would glue (PL Premium) 1/4" drywall over the tile and then finish is as drywall, and then apply what ever finish you like. If that's not acceptable, you could OIL prime the tiles, and then fill in the grout lines with 45, and then prime, and then apply whatever finish you like after that.
Shayne
@@plasterdrywallbyshaynebeda4503 ok cool. Btw your responding a sign of true professionalism hope others recognize this! And much appreciated. Wish you were in Denver. With countertop attached BP depth an issue adding another 1/4”+ drywall so like other option. Initially primed tile with Kilz then coat acrylic paint. Very solid as witnessed when sanding. Quick question Shayne will this suffice in avoidingneed to prime again? Onwards&upwards
@@paulstephens9274 thanks for the good words.
If you've already done the oil prime (Kilz) and painted it, then I would consider going back to your original plan with a skim coat as a base - but I would use Durabond 90. Durabond is a 'high dense' material opposed to the others of medium or low dense materials.
Any time you apply a material over a surface, it will need to be primed. Prime is a sealer and allows the absorption of paint to be consistent therefore reflecting the colour (yes, it's colour, not color!) evenly.
I'm probably making this more difficult than it really is.
I was taught to just add the adhesive straight to the plaster instead of priming the wall with it, it also makes the plaster less slippery.
Many people use that method. I don’t because applying the adhesive first makes a permanent bond, whereas adding the adhesive isn’t a sure thing.
@@plasterdrywallbyshaynebeda4503 makes sense I kinda assumed so, but I guess diff folks have diff techniques.
Do you let the adheisive dry first?
What if we have to mix the paste ourselves? What should be the percentage of lime, and gypsum (and what finnes of gypsum) for bathroom walls as finishing veneer coat over natural hydrolic lime plastering? We don't have ready mixed bags. Or they are very expensive.
Hi, thanks for asking. Purchasing 'ready to go' bags of material is always more expensive, however you get the convenience speed. Mixing your own material should only be done if your experienced in the trade. We use about 70% Double Hydrated Lime, and about 30% Gauging Plaster. These are mixed separately and then blended. If you're not familiar with Lime, you should stay away from it - especially if it's dehydrated lime (or hot lime). You need to know the difference.
Hope this helps, Shayne
Would you insist on metal lathe and lime-based plasters for a freestanding outdoor wall of disintegrating/weak portland earthcrete blocks?
You can do that "water trowling" stuff with fast setting drywall mud, too.
Hi Huu Amani, yes - we do it all the time although dry sanding gives a better result.
@@plasterdrywallbyshaynebeda4503 very true, though I would imagine it would leave about the same surface as this veneer coat does after water sanding it down.
I've never used veneer, though, so I can't say.
No, the result will be very different. Fast setting compounds will feel like dry drywall compound and Veneer will be like a stone.
One plasterer to another I've found using a small hand held garden sprayer to wet the wall let's you manage the wall a little closer without continuous dipping of the blister brush. Have you tried it?
Funny you mention that, I’m using a sprayer today for a cove a wall we built. I like the blister brush because it’s more dramatic 😉! Thanks for watching!
Coves are how I found it and expanded it to "flat" walls and ceilings.
Is this the equivelant of multi finish in England? I’m debating getting one of those grit brushes instead of using a 6 inch splash brush, look way better
Hi Nikthegreekcypriot, I'm not sure of the chemical make up of Multi Finish, but it seems to have some bonding characteristics added. Diamond Veneer Plaster is made up of only two materials - Gypsum & Lime. You'll need to use Diamond Base Coat before the Veneer. I didn't use it in this video because I needed to keep my finish coat very thin and thought it would be a good example of how to use the product besides traditional plastering.
Hope this helps, Shayne PS. The brush I'm using is called a Blister Brush, or Felt Brush.
Hi, thanks for this vid. As a diyer, what mix of lime to gauging plaster would you recommend to give me time to make it really look nice. In my area we don't have diamond and the 45 min time scares me.
Also for lime plaster is it just type s hydrated lime?
Hi JL, if you don't have any experience with a hawk & trowel, I don't think you should be trying any plastering products. Using Lime & Gypsum doesn't give you more time. It is more 'forgiving' and easier to work with. You will also have a curing time of at least 30 days before you can paint, but it may even take up to a year for lime to truly cure.
Saying all that, I mix my Lime & 45 minute Gypsum Gauging plaster to about 60-70% Lime to 30-40% Gypsum. You should watch some other videos on how to mix plaster this way.
Alternatively, you could use Durabond 90, and then drywall compounds for a repair. At least you'll be able to sand it out. There's no sanding Lime & Gypsum.
Hope this helps,
Shayne
There is nothing like experience with plaster and when I was picking it up from the Waldens it wasn't like there was a formula. We put a pile of lime putty on the board and and made a donut, filled the hole with water, added plaster, mixed it well and then combined it with the putty. There is not time to relax. Once you start you have to finish. There is a little time between troweling and then finishing it with the felt brush and your final troweling. It's not easy work. It took a long time to dry. We used to wait at least 11 days before it was dry. The finish is so nice it didn't matter if you painted it right away or not. Of course we live in a different time where speed is valued more than the beautiful plaster finish.@@plasterdrywallbyshaynebeda4503
So do you also put the mesh tape in the corners and edges with the ceiling.
Hi Susan, good question - I did not. If you notice in the video this wall was already structurally finished. I just decorated it by making it smooth. To prevent any failures, I used an adhesive to be sure that the material I applied permanently bonded. Hope this helps, Shayne
Hi there! Thanks for the excellent and thorough video! I’m a general contractor and if I may ask, what is the approximate price difference skim coating with this veneer plaster vs regular mud? Is it feasible to do an entire house with this for level 5 finish?
This video is an example of what's possible with Diamond Veneer Finish Coat. To do an entire room, or home is a different method... The room must be lathed with Plaster Board (Blue), and then taped with self-sticking fiberglass tape, and then a base coat of Diamond Base Coat, and then Diamond Veneer Finish Coat. And, it requires a much higher skill level. To answer your question, it will most likely cost about 10X higher than standard drywall methods. However, the result beautiful and superior!
Hope this helps, Shayne
@@plasterdrywallbyshaynebeda4503 thanks for the reply! Reminds me a lot of how they plaster walls in Europe.
@@vitaliyburlaka691 exactly.
Gréât vidéo and learned lots. I live in an apt that was built in 1910. Most walls are plaster except for a closet that was added to my foyer in the 1980’s. The closet has drywall that I would like to skim coat with Diamond veneer plaster in order to match the rest of the walls. Any insight or tips would be greatly appreciated!
Hi Antoinea, the best method would be to apply a bonding agent, and then a Diamond Base Coat, and the Diamond Veneer finish coat. Hope this helps. Shayne
Thank you sir! For the base coat would you recommend Structolite or Diamond venger base coat? I alps noticed that your video you apply veneer plaster right on top without any vase coat. Is the base coat step required or not just optional.
@@antoinea.jaoude4504 I didn’t use a base coat for this particular application because it was an already finished wall with tile base. Any other application, I would use either Structolite or Diamond Base.
Thanks Shayne, I really appreciate your response. the wall I would like to skim coat has a baseboard. I am a little bit concerned adding base coat layers and plaster veneer finishing coat might make the wall way too thick protruding outside the baseboard.
@@antoinea.jaoude4504 In that case, use my method in the video. It's the same reason I used it.
What is the ideal time to wait before doubling back? What does the plaster look/feel like at this point? How long after the double back is ideal to wait before water troweling? What does the plaster look/feel like at this point?
Hi Matthew, my suggestion would be to watch the video again and you'll find some answers, and then do some experimenting. Handling the material is the only real way to learn. Hope this helps.
I'd never heard of Diamond Veneer until now.
Glad to bring it to your attention. It’s a great product, although needed more skill than other plasters.
Thank you for sharing this video. The details you include in the narrative and the camera work and angles helped me immensely to take on and accomplish a remodel job where the homeowners wanted a diamond veneer finish as opposed to drywall joint compound (my greater experience). I used both a square trowel and a pool trowel for the application and found the pool trowel much better for me to work with, except the corner areas of course. Would you please tell me where I can find the the type of work lights you use? Thanks again and much respect.
The lights you see in this video are studio lights - Neewer. I purchased them from Amazon (of course). They’re pretty cheap and work well.
Would you say that venetian plaster would have been a better choice for this kitchen sir? A little more material, couple of coats ane a couple of thousand dollars more.
Either way you did an awesome job looks great. 👏
Hello I ran into a snag, when I applied my second pass I waited about 20 minutes however my product didn't go on smooth and my product started to turn gray to quickly, so I wet-troweled what I could as fast as I could before the product hardened but I didn't get to the entire wall in time. Did I wait too long for my second pass and how do I correct this after the product cures? The bottom of the wall is fairly smooth the top o the wall is rough.
Hi LaShell, You can do two things. Either use drywall compound (adhesive isn't necessary) and coat the entire area, and then sand it. Or, apply a coat of adhesive and apply another coat of Diamond.
It sounds like the Diamond Veneer your using is either old or hasn't been climate controlled. Once humidity starts to get in the product, it will speed up the setting time.
Hope this helps, and thanks for watching. Shayne
Even though I apply Diamond over PlasterWeld, it always dries with a blotchy appearance (mottled gray and white). Is this normal?
Hi and thank you for the question! Yes, that's exactly how it looks - blotchy gray. Most of the time we're painting the surface afterwards, but some people - including me - like the look of the 'artisan' finish. It resembles Venetian plaster a bit. I always recommend painting afterwards. Hope this helps.
Have you ever used keenes or red top? Great video !
Hi Jacob, all our work is small and mostly repair. We typically us Struco-lite instead of Red Top gypsum because it's easier to mix and handle on the types of jobs we do. I haven't used Keenes, but would if I needed the open working time to complete a project - and we rarely come across sanded finishes in our area - everything is troweled to a smooth finish. Diamond Veneer is my favourite product because of the little amount of lime, and that allows for next day painting instead of waiting for the lime to cure.
Thanks for supporting me!
Would this work for old crown molding I have to redo a bunch of sections that fell off , on a really old building.
Hi Urpapi4life87, plaster cove work can be tricky. You can use Diamond for this, however it gets really hard and if you were to have made a mistake, you can't sand it down. I would suggest fixing them with a plaster/cement bonding adhesive, Durabond 90, and then a skim of drywall compound. This way you can shape the contour with sanding if needed. Hope this helps.
This may seem odd but I’ve been working with a small painting and drywall company for around 4 years now and I’ve come to love the big yellow sponges in the flooring sections of Home Depot/Lowe’s, would that work just as well in this process?
Hi Charlie, thank you for subscribing and watching! The reason I don't use a sponge is that they drip too much. I would instead use a spray bottle and mist the areas that need to be water troweled. The advantage to using a felt brush is that it aids in the 'wet sanding' process. Hope this helps.
@@plasterdrywallbyshaynebeda4503 good point, Thankyou!
Wondering where you would get your material from I cannot find a veneer in the state of Maryland
Hi Steve, USG, or here in Canada it's CGC is the UNITED STATES GYPSUM COMPANY, and they are HUGE! I'm sure if you went to any building supply company they could order it in for you. I need to purchase our supplies by the skid in most cases because plaster is being taken over by drywall and its methods. If you're having a hard time finding a supplier, give USG a call. You'll find their phone number on their website. They are happy to help.
can you apply the diamond veneer to drywall? if so what kind of primer will I need?
Hello, Diamond Veneer should be used over 'grand prix plaster board'. However, it can be used over drywall using proper preparation... coat the entire surface with a PVA adhesive/plaster bonder, and then tape coat with Diamond BASE, and then coat with Diamond Veneer. The video you watched is an example of 'experimentation' with the product.
Thanks for watching!
If you don't get it right the first time can you come back the next day and do the process again? Do you need to do 2 coats or 1?
Hi Tammy, if you could imaging that because Diamond Veneer is gypsum, and gypsum is a stone, you will need to coat your work with PVA - Polyvinyl Acetate- to allow your new coat to adhere. Gypsum won’t stick to dry gypsum. Once you apply the PCA, you’re good to go with another layer of Diamond- or any other product you want to use. I would apply an ultra thin coat, and then double back with another ultra thin coat. Hope this helps. Sometimes it’s hard to explain unless we’re hands on.
Can this be used over cement board at a n exterior ceiling
Hi James, yes, but your really should be using a gypsum base coat first - Diamond Base, and then Diamond Veneer. Don't forget to always use adhesive! Thanks for watching, Shayne
If I have popcorn I can not remove by scrapping can I just apply this product instead of regular mud?
I don't think this method is the best choice to skim over popcorn texture. My first suggestion would be to hang drywall right over the existing ceiling, and then tape and finish it. My next option would be to skim it 3 X with drywall compound. Hope this helps.
Would you recommend the quickcrete adhesive if using plaster to fill in brick fireplaces (unpainted)? Also, what plaster would you use to do so?
Definitely - adhesive is the magic potion! Over brick, I would use a base coat of structolite, and then a finish coat of Diamond Veneer or even drywall compound would work great.
I intend to add a diamond veneer skim coat over existing plaster. I have closed in a couple of doors with sheetrock and have brought everything level with the existing plaster with stuctolite. The existing plaster finish is old world and my intent is to plaster weld and apply diamond veneer without a base coat. I am okay with it having an imperfect smooth look.
You stated in the comments that a base coat is preferred but is it necessary for my application?
I forgot to state that I intend to apply the diamond finish to the entire room.
Hi David, you will be fine applying Diamond Veneer over your existing plaster. The base coat is only required if you're planning on going over unfinished plaster board or drywall.
Thanks for watching! Shayne
did you remove masking tape before the plaster was completely dry, or after?
Hi Rooty, this video is in ‘almost’ real time - the plaster is hard but not dry. Hope this helps.
Would you use Diamond to texture? I want to do a hand texture of some sort and leave it raw.
Hi Kyle, Diamond would make hand great textures. I would use a sheet of drywall, apply some PVA (cement bonding adhesive), and then experiment with the Diamond. In fact, if you're self-employed in the trade, you could make several 2'x2' panels of MDF ( with the PVA) and create your own signature hand textures to sell. Hope this helps.
Can you do this on a freshly dry walled and muddled wall?
Hi Phillips Property Maintenance, Yes you can, however would make some adjustments...
Hang the board, tape it with Durabond 90 Type Setting Compound, apply PVA/Cement Bonding Adhesive/Plaster Bonding Adhesive, apply a base coat of Diamond Veneer Base, and then apply the Diamond Veneer Finish Coat. This will give you a professional result. If you choose to apply it right over standard drywall, at least apply the PVA first. I would be concerned about future cracking but it may not.
Hope this helps and thanks for watching!
Nice
Thanks for watching!
Great video. Im from the UK and this seems to be the closest product ive seen to multi finish thistle. Can this product be applied directly to new drywall surface without bonding adhesive application?
Cheers
No, it won’t ‘stick’ or have the strength to stand the rest of time. You need a base coat of plaster bonding adhesive first - or use plaster board instead of drywall - and then Diamond Base, and then Diamond Veneer plaster. Hope this helps.
I am also from the UK looking for a product close to thistle multi finish. Can I ask what you thought on compassion after using this diamond from this video?
I am hoping to use it on to sheet rock. (Gyproc) is what i know it as and fibre tape the joints as normal. I was thinking size the wall in water down with pva glue as I normally would 10 mins before applying it. My method I was going to 1st coat it let it take up a good bit and then do a 2nd coat when it doesn’t dent in by a finger’s press and then just polish it up with a with a bit of pressure take out the glut and mist just using my plastic refina flexi trowel when its ready. To see if it works the same way. I was thinking to just try it out in my sub basement so its purely for a trail run just 1 wall as a test patch to see the result. Thanks for any insight you can give me
I'm so keen to try this but worried about timing. Would love to know if walls/ceiling can be done in sections for those of us who might not be able to do a wall fast enough.
Hi, yes. Do as much as you can handle, and as long as the coat your working into is hard but not dry, it'll bond just fine.
Hope this helps, Shayne
once you start working with plaster you'll see when it is workable or not. It's a very intuitive material. You'll just end up throwing some out. Once it starts to set it's kind of obvious. Just stop and start cleaning up. Never let it sit, clean up right away before it sets.
Another thing is that if you don't have really clean tools and buckets when you start mixing a new batch it can accelerate the set time. Once you do that once or twice you'll never do it again.
I used to mix it on a half sheet of plywood on some saw horses....
@@plasterdrywallbyshaynebeda4503thanks for the reply. I was thinking more in terms of days. Can I do sections of a wall or ceiling one day and continue on a future date? :)
@@mothersonduo Yes you can, however you will need to apply adhesive to the dry areas in order for the fresh material to bond.
My base coat is structo lite ,would diamond veneer plaster work over this?
Diamond Veneer is great over Structo Lite! If your Structo base is dry, you'll have to apply some plaster bonding adhesive to make the Diamond stick. If you're Structo is hard but still wet, I leave the troweled face 'open', not smooth, and then apply the Diamond. If it's wet and smooth, I would still use some adhesive to make sure the Diamond bonds. Hope this helps.
I like to add the color to the plaster and then you are done and it actually looks like a plastered wall.
Great technique! Thanks for watching!
what product do you use to color the plaster?
Can you use the bonding agent over paint and then veneer plaster
Hi Ramon, using the bonding agent over paint is exactly what I did in this video and the result was great. However, if the base wasn't installed, I would have applied the adhesive, and then a base coat of Diamond Base, and then a finish coat of Diamond Veneer. Hope this helps.
Yippy! I found the answer to my question! My plan is to do a venetian style treatment on my floor then clearcoat with epoxy. It's the old " makeup on a pig" solution. Hehe
How similar is this brand to plaster of Paris? I can’t source plaster of Paris in my area but the diamond veneer is available.. does it dry very quickly as well if we add cement and sand to the mix?
I wouldn't use Diamond the same way you use Quickset plaster (Plaster of Paris). Diamond is a finish coat all on its own - and gets harder than Quickset plaster.
If Diamond is available, then Quickset must be as well. They come from the same company. I would call USG/CGC and ask them where you can get Quickset. They will have a list of dealers in your area.
And, if you really can't get Quickset Plaster, then experiment with Diamond. I've never done it.
Hope this helps, Shayne
@@plasterdrywallbyshaynebeda4503 thank you Shayne, appreciate it.
Would you use a pool trowel to apply a skim coat plaster containing lime and silica sand ? Which is a good Pool trowel ? What is the procedure to apply the skim coat ? How would you apply a very very very stiff almost 'water free' lime base coat e.g. 8x3 inch Midget trowel or a Japanese Jigane trowel or other ?thank you for your help.
Hi DRJMF1, I use two types of trowels for all my work - pool trowels and standard rectangular finish trowels. The stiffer the material your using, the stiffer the trowel must be. My pool trowels are Curry (very flexible blade) and Nella (much stiffer blade). I use a multitude of finish trowels but my main finish trowel is Nella. I use a pool trowel anywhere I would use a finish trowel - they're more forgiving. However, that doesn't mean I don't use my finishing trowels. Determining which trowel is the best one for the occasion comes with experience. I can't tell you which one to use, only the ones I use on a specific repair. Hope this helps, Shayne
@@plasterdrywallbyshaynebeda4503 Yes, agree thanks. I have vertical hardwood wall beading every 2ft to simplify the plastering ob, these will stay on the wall. What size of finishing float would be ok to skim across the 2ft sections of wall span ? Would a smaller midget trowel work better e.g. Refina pointed midget trowel ?
@@DRJMF1 In this case, I would simply use my 14" Nella Finishing Trowel. However, if a pointed trowel is what you have, go ahead. If you have a choice, use a standard finishing trowel.
Thank you sir for your guidance.
we are starting with a LEVEL #5 drywall finish.
We applied the QUIKCRETE BONDING ADHESIVE as recommended then we will apply the Diamond Veer. Does this work.
We Appreciate it very much! Mike
This video is an example of what’s possible, however you really should be applying a Diamond Base coat first, and then the Diamond Veneer.
appreciate the amazing response!!!
the "base" to the level 5 dry wall is it because the drywall sucks out the water so less working time. (i guess the main reason)
thank you!!
Diamond Veneer is a ‘plastering’ method, not a drywall method. Level 5 should be completed with ‘drywall’ products. Diamond will not have any flexibility and therefore can crack if the ‘base’ isn’t solid enough. Drywall compounds have ‘some’ flexibility, therefore no need for a base coat. Hope this helps.
Can you diamond veneer over cob or mud straw sand walls?
Only if you have a stable basecoat. You finish will only be as secure as the surface it's applied to. Otherwise, it makes a great finish coat!
Very nice, there are so few videos about working with Diamond Veneer outside of Kirk Giordano, and his method is very unorthodox: he doesn't double back a second coat or water trowel, and I am not sure how he is smoothing out his wet plaster without tearing a bunch of it off, which is what happened when I tried it. I do wish you had shown more about how you worked around that outlet, especially the narrowest part underneath it.
One issue I have had is my Diamond is curing a bit chalky, and can be scratched with a fingernail. My only thoughts are I used too much water while smoothing, or over troweled while it was still wet, or maybe spread it too thin, would any of those cause this problem?
Hi Paul, first off, thanks for supporting my new endeavour! Kirk seems to be a great rough plasterer - lathing and base coats - but nothing more than that. Overworking the Diamond finish with too much water will make it a bit chalky. Diamond Veneer is mostly gypsum and the reason it gets a bit chalky. I used standard taping knives around the receptacle. As I learn how to present this kind of work, I’ll pay more attention to those small details that make a big difference.
No disrespect when I make my comment. I would give you a passing grade. Although Kirk falls short of quality and at times I think he’s makes things up as he goes. In this video you show the basics and even mention a base coat layer which I would have probably have done. Applying a base coat does two thing right out of the gate. First is will help fill out with the faux brick and second it will give your finish coat a little suction that will provide a better finish. I notice like Kirk you use a pool trowel. I have to say I never ever have used a pool trowel in 35 years. Use a plaster trowel for plaster. Try it I promise you will find better control. A pool towel flexes to much on the end (toe and heel) and it’s huge. Start on the left side work to the right. Then reapply a second coat using the same product, but never use fresh over old. Smooth it out the best you can ten wait. It tends to turn color and looses its sheen. You should never be able to put your fingernail into diamond. I have a feeling you “killed” the set caused by over working it. It probably even peeled on you. It’s ok though. I like to see homeowners get their hands dirty but plaster can be evil and difficult to say the least. You used a real plaster mop. Usually that is used at the end of your last troweling. During the troweling process use a large 9” bristle brush. I would have set the tape back 1/8” as well. It’s a bit to close. And if you try using a throw a way brush at the corners and base will give a clean finished look. Also, auto clave lime finish plaster actually never sets, it needs the aid of molding plaster or gauging plaster. At the end of the day you did a ok job. On the next one shine a light on an angle while you trowel. This can aid in laying down your finish real smooth.
Do you have a channel with some how-to info? Let's see your technique
is there any advantage of using this over microcement for an accent wall or bathroom walls?
Hi Kirill, I haven't used 'microcements'. I would venture to guess that microcements cost more because they are produced with several ingredients to accomplish result. Whereas Diamond Veneer is simply gypsum with a little bit of lime - and about $30 per bag (that's Canadian).
Other than that, I don't have a good answer for you. Thanks for watching!
@@plasterdrywallbyshaynebeda4503 Thanks a lot for your reply! When it dries is the surface glassy or matt? Does it leave any dust on the fingers? :)
@@kirillkolesnikov566 I wouldn't leave it unpainted - it's not a finished 'finish'.
@@plasterdrywallbyshaynebeda4503 But it looks so elegant, especially after you water troweled it. Why can't we seal and enjoy it? Or add a pigment for example. I just bought a bag of diamond, gonna mess with it tomorrow, really excited to try this stuff.
How long you should wait in between the first and second coat???
Then after how long you come back with the water and start finishing it???
Great video by the way keep up the good videos
Hi JQ, once Diamond is mixed, you have about 1 hour to complete the task - including your double back coat. 20 - 30 minutes is a good time frame to start your double back.
I NEED HELP!!!!! Could anyone tell me if i can use plaster of paris instead of diamond veneer plaster? Diamond veneer plaster is no where to bought anywhere near me and can not be ordered.
Hi Jen, you can, however you’ll need to add some lime to it - and if you’re not a professional, I would advise not to use this method. Instead, you could use a fast setting compound from USG/CGC like Sheetrock 20,45,or 90. These products get hard but you can still sand them. May need a couple of coats. Hope this helps, Shayne
Is this for interior use only?
Hi Alex, yes. You would use stuccos for anything exterior. Shayne
Why don't you lightly sand the plaster to make sure it is smooth prior to applying the plaster binder? Also why don't you use a wide skimming blade initially before using the finishing trowel?
I have a question could you do this to a exterior Concrete wall?
Thanks for asking! Yes you can. There's a couple things to consider. 1. Cracks in the concrete. This will not fix cracks and the crack will find it's way right through the Veneer. You should be sure to fix any concrete crack first. 2. It's always better to use the Diamond Base Coat first, and then the Diamond Veneer. The only reason you didn't see me use it in this video is because I didn't want to loose the return depth on the tile base transition. Hope this helps, Shayne
yes it did and thank you for this video on also for the information I truly appreciate it.
I was thinking about using it on a hardie backer cement board on my exterior wall. then I would paint over it .
@@berrisbogle My method would be to coat all the joints with cement bonding adhesive, and then tape them with fiberglass tape and Durabond 90 (not to be confused with other fast setting 90 min compounds), and then a base coat of Diamond Base, and then a beautiful coat of Diamond Veneer.
Does it need to be sealed?
Hello Kaceestagg, this finish is meant to be painted, however my customer is choosing to leave it the way it is for a while. I'm sure you could seal it with anything you like. Thanks for watching!
Sometimes the masking and cleaning takes me longer than the actual job on domestic repairs LOL.
...it's that old '4 hours sharpening the axe' thing lol
Yep! Lol