Thread Anatomy- (In less than 5 min!)
Vložit
- čas přidán 7. 05. 2021
- A 3D animated video showing the anatomy of threads. Machining threads is difficult enough so its time to start with the basics. Watch this video to learn the basic anatomy of threads.
From Metric threads to standard Imperial, lets dig into what kind of threads are out there. We will answer this with a quick definition and general use of each individual thread. This is just the "Tip of the iceberg" but we all have to start somewhere! By the end of this video you will be able to identify and describe the following threads: Metric threads, Inch threads, Acme threads, Knuckle threads, Modified square threads, Sharp V threads, Buttress threads, Worm threads and of course Whitworth threads as well. Enjoy and Ill get started on the next video!
🔴 RECOMMENDED VIDEOS/PLAYLISTS
🎥 • ANATOMY OF AN ENDMILL
🎥 • Best Drill Anatomy Exa...
🔴 ** BE MY FRIEND **
✅ Website: www.machiningtutorials.com/
✅ Instagram: / machining_tutorials
✅ Facebook: / machiningtutorials
🔴 ** ABOUT ME **
My name is Nick Aycock and I love teaching machining tutorials! From philosophy to hands on machining.
🔴 ** ABOUT THE CHANNEL **
A personal growth channel for learning about machining, business, leadership and more.
💡 TOPICS IN THIS VIDEO 💡
• threads
• threadanatomy
• machiningthreads
• whitworth
• buttress
• acme
• metric
• TPI
• knuckle
• sharpV
• Worm
• Square
• threadingonamanual
🔎 HASHTAGS 🔎
#threads
#threadanatomy
#machiningthreads
#whitworth
#buttress
#acme
#metric
#TPI
#knuckle
#sharpV
#Worm
#Square
#threadingonamanual
I've lived 74 years and had not been aware of this. I feel so lucky to have lived long enough to benefit from CZcams. Thank you ☺
In my 70 years I've never known this. (I wish I'd known earlier. Some projects might have run a little smoother. 🤣🤣)
We're never too old to learn. 😉😊😇👍
iam 31 now ...liked your comment
Same here soon to be 75 and I didn't know this about so many thread types. very interesting.
62🙃😉
Same age and CZcams has made my life so much easier as a DIY person.
great vid, but you forgot the most common use for the "acme" thread: used in roadrunner traps.
I'm glad someone else recognized the legendary use of this thread pattern.
Unfortunately not the best endorsement for the Acme thread!!! Just never seemed to work! Beep, beep! 👍🤪
A company that makes everything
Groan. ;-)
😂
Excellent video. I've spent almost thirty years operating manual lathes, and have cut many different types of threads.
There's one thread type that I've cut that you don't mention: Trapezoidal thread, similar to Acme, but with all metric dimensions.
Note to newbies: The differences between thread types are pretty obvious when they are drawn on paper or computer graphics, but not always so obvious when you are looking at a machine part, especially if it is worn.
Trivia: If you ever encounter an oddball thread that mixes an imperial diameter with a metric pitch, or vice versa, it was probably made in Italy. (It ain't stupid if it works...)
I never had to cut Trapezzoidal threads. We would puchase RH and LH threaded rods and machine the ends to our customers print.
I’ve cut many Trap, male/female threads some multi-start on Harrison M390 . What lathe you using?
nice comment
@@glengillham4629 Think I saw a video from Joe Pie or maybe Tom Lipton on that.
I did some multi-start external threads a few times when I 1st got my CNC.. Kool factor, but not practical. Food industry uses them I think. Plastic molded jars.
He mentions Trapezoidal thread in the description of Acme thread pitch.
Very Nicely Done , It's as if my machinery handbook came to life with a quaint song playing in the background. P.S. It's much more than 5 minutes with the pauses.
Here after are some additional information about Metric system
To find the drill size for hole that will be taped you just subtract the thread pitch.
Exemple:
M8 x 1.25 tap would need a 6.75 mm drill bit (8-1.25= 6.75)
Also every screw or nut revolution will make it progress 1.25mm
Also for small metric size you can find the wrench size you need by multiply the pitch by 10
Exemple:
M3 x 0.5 would be a 5mm wrench (0.5 x 10 = 5 ) and 2.5mm drill size
M4 x 0.7 would be a 7mm wrench and 3.3mm drill size
M5 x 0.8 would be a 8 mm wrench and 4.2mm drill size
M6 x 1.0 would be a 10mm wrench and 5mm drill size
M8 x 1.25 would be a 13mm wrench
Its all so... logical and purposefully done, oh that Si ;-)
Re: "you can find the wrench size you need by multiply the pitch by 10" That's not exactly true... It usually works but, for example, a M8 x 1.2 bolt or nut made to the old J.I.S (Japanese Industrial Standard) will use a 12mm wrench not a 13mm wrench. A lot of the JIS standards were changed in 1985 to match the ISO and DIN standards but I don't remember if this is one of them.
@@robertstout4764 ? 1.2 * 10 = 12
I've never seen metric drills on consumer market in US. Always fractional inch, decimal inch, wire size or letter size. I'm pretty sure I saw a few metric drills here and there working at Caterpillar, but mostly I recall decimal inch even though the prints were all metric. I've also seen odd hex sizes like 16mm hex on a 10mm bolt, 14 or 12 on an 8mm bolt, and that's not the special reduced size hex for clearance. Also 18 or 19 hex on a 12mm bolt. Mostly I see the odd hex sizes on Chinese stuff, but I've seen the 16mm head on 10mm Cat bolts with "CAT" logo on the head (not cheap China stuff).
@@bene5431 M8 x 1.2 was a typo. Should have said a M8 x1.25 bolt or nut made to a J.I.S standard
The WHITWORTH thread of huge historical significance because it marked the introduction of standard thread forms by Joseph Whitworth. Although most people take standard threadforms and other manufacturing standardisation for granted, Whitworth's standard thread and his other standardisation ideas brought a massive step forward in manufacturing efficiency from which we still benefit hugely today. Although fallen from use for general engineering, most CZcamsrs, and many other people, use Whitworth threads every day since 1/4" Whitworth is used for the tripod mounting thread on most still and small video cameras and 3/8" Whitworth on large video cameras. The Whitworth thread form is used for British Standard Pipe (BSP) threads, now renamed ISO R and ISO G.
That’s fascinating, I’ve been a photo hobbyist for 50+ years, and always assumed that tripod threads were just SAE. A standard 1/4-20 bolt mates fine with the standard camera socket. I kind of wonder why they didn’t just make them SAE at some point, are there some situations where they wouldn’t mate, or do they only mate due to over-generous tolerances?
These fasteners are intended for items that are finger tight and they need to be very easy to align and engage by unskilled users. For those reasons, the tolerance band can be large since a finely fitted high strength thread is not required. That wide tolerance band means that on most occasions both the 1/4 and 3/8 versions fit together regardless of which standard is used. However, since the Whitworth will have a deeper thread because of its narrower angle there can be interference. Probably more likely when fitting UNC screw into a Whitworth hole. A good reason to be extremely careful when mounting expensive, particularly classic, cameras onto low-cost mounts made recently in workshops of unknown origin.
Personally, I feel it is worth pressing home the point about Whitworth for cameras because it is just so cool keeping that important piece of 180 year old engineering history alive in every camera body and mount.
@@jimf671 Thanks for the detail, and especially the note about being careful with vintage cameras!
Best five minutes I've spent in a long time. Thanks for the education.
Agreed
I doubt there is a more informative video on YT.
when Archimedes invented the screw in 521 AD the first person he showed it to said " Can i get one a half inch longer ? "
What makes you think Archimedes invented "the screw" rather than a *very specific version of it* that could lift water...?
@@AttilaAsztalos it's a joke
Archimedes lived before Christ was born.
@@chrysoval8681what does that have to do with anything
@@TheCubeFactor Why?
A day class's worth of info. Excellent!
As a purveyor of random knowledge, this video was highly satisfying. Immediately saved as a resource for later. Thanks!
i watched the entire video without even having particular interest in threads... just becasue the video was done so well.
I have no dealings with these items, so I have no idea what prompted me to watch this vid- but I'm glad I did. The graphics are superb, and the content was an education: I blush to admit I thought threaded things were much of a muchness. Now I know better. The complexity of their screwy anatomy has made my brain hurt (but in a good way) and henceforth I'll accord these humble fixings the respect they deserve. Thanks.
Great video! My first Machinery Handbook I purchased was used. Was the 20th edition 4th issue printed in 1978 and I've still have it. Long before we had Cad system in the shop along with all kinds of new tech that was amazing to us old timers. Cleveland MoMax cobalt was the good stuff back then. Finally convinced the owner to puchase carbide inserts. He was blown away by the time we saved him. Now you talk about a old school machinist he was the OG.
Thank You! The best descriptions I have ever seen regarding threads. Anyone getting involved with machining or mechanics should watch this and take note.
Excellent vid with great animaton. One caveat for the newbies out there. Mass produced capscrews/bolts and nuts have ROLLED threads which have zero stress points at the rounded root and crest. This makes them stronger than MACHINED threads which have sharp edges at the root and crest. These sharp edges are stress prone and thus make machined capscrews/bolts and nuts weaker. ALWAYS use fasteners with rolled threads whenever possible, especially in high load and/or vibration prone areas.
It's 0522 and I've already learned something today. Fantastic video! Thank you.
Quite possibly my best time investment in CZcams to-date. Outstanding video, and the lack of voices or crap music was a pleasant change. Thanks for the education!
Thank you for the information! Such content I've never had before. Now I know why screws are often so different.
Thank you! This is one of THE most useful videos I have ever watched - after almost 40 years in Movie Special effects Engineering!
What a gem of vintage tractor Lance! I can sense your enthusiasm in restoring this beauty we shall look forward in viewing future videos on this and thank you for producing them.
As a machinist who is trying to improve his trade, thank you for this
This video got a lot better once I realized there was no useful audio and muted it. Your animation of the threads spinning around was pretty, but it would have appreciated about one more second to read the text as it's not that possible to pause on the phone and still have everything readable. good presentation,
If you pause the video and then tap the video itself, not the pause button, it will clear all that off the screen and you can see/read it with no problem. That's what I do anyway
Choose a different 'play' speed.
It's not feasible for 1 video to cater for all 'special needs'.
@@trueaussie9230 that's a really good idea. Thank you
@@spacecase0
No worries, mate.
Also @Jeri Kropp's advice is worthwhile.
It took a LOOOOOONG time before I discovered you can remove the 'overlay' from a paused video.
Good luck in the future.
😉😊😇👍
Your video is very professional and image-oriented. We also pay special attention to thread problems when processing.Thank you very much.
A great video, some standards I have not come across before, many thanks for a top class tutorial ...
Gave the pause function a workout, and saved vid too much cool info to absorb. Comments added even more insight/info. Thanks to all!
I did my time as a Fitter Machinist and Tool maker, we used Form Threads on most of our Specialised Machines. Our form threads were Pitch and Angle independent of any known threads. Each Machine we sent out had a unique array of Form Threads in Critical Areas. The idea being no other company could Economically Repair our machines, as no off the shelf threads would fit. In other words we made our own nuts and bolts. We were therefore Guaranteed the Maintenance Contract for the life of our Machines, some of which were still operating for more than thirty years.
@Michael John you have just described the EXACT reason why Sir Joseph Whitworth designed the thread that bears his name ... It was costing British industry a small fortune in holding or making custom threads and WITHOUT Whitworth it would have been an impossibility for the industrial revolution to have progressed as rapidly as it did!
@@boblewis5558 Yes Bob, you are 100% correct. When involved in the maintenance of machinery, it is frustrating and maddening to come across odd threads. When I find these odd threads nowadays, I smile.. Karma is a bitch. Cheers from Michael. Australia.😁
EXCELLENT info for most anyone from any sector (DIYer to Pro).
Thank you,great clarifying examples explaining the functions and differences.
Great vid. Thanks for putting the info together with excellent video graphics.
TYSM I have a test on threads tomorrow morning and without this information I would have been *screwed*
Excellent work, clear, concise, thank you very much.
Incredibly useful information well and clearly presented. Thank you so much!
Best thread video explanation I've ever seen.
Great tutorial of thread types with excellent examples and information.
Thanks for sharing.
Wow, I had no idea. Thank you for sharing this video. Excellent job.
100% Excellent. SImple and to the point while informing with clarity.
Very good video!
I have been in the thread business for a long time, but this video has refreshed much that I have forgotten. Thank you for a great video.
I will keep it in my resource for future reference.
Fascinating!
Thank you for posting. Very illuminating.
Excellent information, understandable and clear. Thanks very much for making this video!
Most excellent video --- had no idea so many threads existed and for what application. Many thanks!
I wish I saw this video 15 years ago, but I am damn sure glad I've seen it now. Saved, and subscribed.
never too old to learn, the worm thread looks the strongest, new sub, thanks!
Awesome. Simple and clear!
THAT was more interesting than I was expecting
Awesome video man I really thought it was informative for how nice and short it was 😎
Liked and subscribed. When I was a kid, I got my A&P and set to restoring warbirds. Fasteners were a much bigger world than I’d have even thought to ask about. I picked up a AN hardware and fasteners book at Oshkosh, read the ink right out of it.
Fellow screw guru here. Thanks for the video. The new guys always ask me how I know so much about fasteners and screws. I reply the Machinist handbook and I went to college for screws. You ought to see my college sports wear from Screw University. 😉
Screw-U !
What a great video! So many threads I did not know. Interesting to see, that the old metric thread had also 55° flank angle as the Withworth.
Dude great job. I've been at this for a while and still I learned something. I am going to use this video as an introduction to threads for my young employees. I subbed and looking for more.
I appreciate it!! I’ll do my best to give back. I’ve worked too hard to not share what I’ve been learning. Good luck with your apprentices!
@@Machining-tutorials
I love your attitude.
Information only has value if it's shared. 👍
Simple, easy, neat, concise, precise, excellent. Greets from Venezuela
So informative. I would have studied this and done the homework without fail to learn this in my schooldays. I know I would have done well.
Excellent video, thank you !
this is pure gold, thank you, subscribed!
Great video. Informative and entertaining.
Great Vid. I love interesting factoid type stuff like this. Who knew there were so many different types- super cool and Thanks.
Wow! I was unaware that there were so many different types. Thanks!
You have made it so easy to learn.
Thanks. This a great reference.
Very informative video.
Thank you very much.
Beautiful graphics, great presentation.
Thank you.
Many thanks!
Thanks, I did learn something useful.
Fascinating!
A very good introduction to the topic.
Very well done; thank you.
Una breve clase educativa, OBLIGADA para cualquier estudiante de ingeniería mecánica o técnico en uso de torno.
Breve, preciso, conciso... en fin, ESPECTACULAR¡¡.
Откуда вы? Ютуб перевёл ваш текст прекрасно! Главное точно!
So interesting. Thank you
As I remember it whitworth threads from my old British motorcycle days where easy to cross thread and to strip!
Whitworth is still around and popular , 1/4" BSW is the standard camera mount thread .
Nice job on presentation, thanks!
Thank you for the very informative video. I used to wonder why there was no single standard pitch and TPI for screws (AKA bolts, nuts augers, etc.). This puts it in a simple visual way for beginners to understand. I recall (many, many, years ago) in algebra wondering why I had to do equations involving more than 360 degrees...
Thanks! That was great and very informative.🇺🇸🤠
This is a great video WOW, the music a very good choice the edit well done are things I needed to know. Many Tanks...
Very informative video but in a very simple & easy to understand language, particularly more effective because of appropriate visuals... Worthwhile using in academic presentations....👌👍🤠
Thank you! It is so helpful video!
Well up until now I didn't even know I needed to learn about thread types... now I know!
Great video. Thank a bunch
worked with acme and rolled thread for 40 yrs. we use to use thread rolling machines to make threaded rods
Very good, many thanks!
Thank you, well prepared video
Very informative. Thanks
Very useful video, thanks.
THANKS! THIS, and then the length, the diameter, the head, the material, the manufacturer etc., is why my eyes just blaze over when I go into the fastener section of a big box store--and why I usually pick mine up at a small, mom-and-pa store.
Excelente vídeo👍👏👏
Thank you for sharing. Very informing video
Kudos and thanks! This was so clear, concise and understandable, it’s by far the best reference on thread types I’ve seen - thanks again!
(Just scanned your other vids - new subscriber! 😁)
Glad it was helpful!
Thank you that was educational
Thanks for your efforts
Superb presentation!
Thank you for a great video
Thanks for the refresher. ME3180 was a long time ago.
Awesome info.
Thank you!
Very informative. Tks.
Outstanding job ! 👍🍻
brilliant stuff. thank you
Excellent, a very informative video
Thanks for sharing
That was brilliant thank you
what thread shape is best for injection moulding as i need it for rapid motion so it delivers pvc in mold im using a motor and a long screw type rod but which thread to choose
Excellent
BRAVO video is put together very very well, it's also very informative, THKS !... music is on point !... BRAVO !!!!