Video není dostupné.
Omlouváme se.
MOST INSANE MOTORCYCLES!
Vložit
- čas přidán 25. 12. 2020
- Come along with us on this quest to bring you the absolute craziest, wildest, fastest, most powerful motorcycles and drag bikes we can find. In this full length video we will take you to Maryland International Raceway, Santa Pod Raceway in England, Darlington Dragway in SC and South Georgia Motorsports Park to see the amazing Rocket powered motorcycle of Eric Teboul, the Top Fuel Nitro Motorcycles of world record holder Larry “Spiderman” McBride, “Fast” Filippos Papafilippou, Dave Vantine, the world’s Fastest turbo Hayabusa Pro Street bikes of Williford Racing’s Rodney Williford, Ehren Litten and others, the world’s fastest Honda CBR 1000R of Frankie Stotz, the world’s fastest turbo GSXR 1000 of DME and Jeremey Teasley, super charged nitro Harleys of Jay Turner and Jason Pridemore, a parallel twin know as “The Beast”, motorcycle drag racing fails, JR. Drag bikes , a KTM drag bike, inside interviews from the pit area and Top Fuel Motorcycle rebuilds and more! Enjoy this full length motorcycle drag racing extravaganza!
Subscribe to OUR Motorcycle Channel ► / cycledrag
DANGGGGG!!!!! When they put Spidey's bike on the High Side of the fuel pump it HITS HARD!!!!!!
ZZR 1400 is my bike, I love it, fast and nice to drive on trips whit my wife. Just love it ❤️❤️❤️❤️
Holy Roller 🤪🤪🤪
Wicked,,,,,
Keep up the great work
Thanks for bringing it Bra ;)
Absolutely FANTASTIC Video Jack, what a mix of classies AWESOME 👍👍🙏. STAY SAFE JACK, WE need YOU . To bring all the Acton to use 🙏.
Super fast vacuum cleaner races-awesome.
Good job Jack you captured the vibe of the event
This was my evening chill out video/ sitcom/ movie! Keep it up!
Very entertaining format, Your love for the sport shows, Keep up the great work.
Love this!!!
Featured length.. love this guy been supporting for years now.....let's go..
Enjoy watching all the bikes, keep up the good work. I’m an old school Kawasaki kz 650 and csr 650 owner. Still want a kz 1000.
Love the red honda!
Amazing vlog, one of the best. Keep on.
Regards
Keep the long videos coming love them
Love the rocket man.
looks like he snaped the out put shaft on transmission i did the same thing at nunion grove on my brothers sizuki 1150 turbo that ted hoffmiester jr built for ken knudson
Freakin BADASS channel. This kids love for the sport is awesome.
Yes
Thank you for everything
I'll be meeting you soon I'm in the process of building a nitromethane Harley-Davidson my name is Everett reading thanks for the great videos
Couldn’t wait for the 🔥 content
Love it it's awesome Charlie St Louis Missouri
Top man😁
Super good job
Oh yeah, cycle drag, cycle drag, cycle drag!!! 👍👍👍
Love this stuff
great job from Puerto Rico we love cycle drag
emm wow 🔥
1 more time💥cycle drag...
Great video Jack!! You should do more compilation videos like ProStreet compilation, Fuel bike compilation etc. Does anyone here know if Bill Furr & his son Armon Furr still race?! Think Bill was TF Harley and his son ran Pro Fuel...met them back in like 06 or 07 something like that at Beech Bend we were there with our outlaw street Harley running an AMRA event. And one last thing lol anyone here from the ADBA days?!? 🤙🏼
Thank you for watching?
I think you guys should go ahead and put together a grudge event 😁. Good content
That hydrogen steam bike is fkn insane and Eric is a legend the way he rides det bihh 👏🏽
How can we find CYCLE DRAG SHIRTS?
Sick video bro we need to get the views and likes up man I mean wtf this channel is better than most if not all 🤷🏽♂️
I love hayabusa & old school Kawasaki kz1000
Man there is a guy at 26:07 that looked like he tripped and superman dove to the ground.
Cycle Drag Rules....greetings from the Netherlands 🇳🇱🇳🇱
Spiderman on his warp speed rocket ship
RIP TT Jones.
Did I just see Brock Davidson with a Thumps Up?
Do they use Trim Tex on the bike?
Wonderful Work Jack and the Team😉. Am watching vids in the UK. Milton Keynes 15 miles from Santa Pod Let’s hope we get some racing here this side of the pond this year......2020 wash out bar moto gp thank god for🙂
Love the content in the vids Jack....don’t mind 30 mins or a full hour or more lol prefer bikes but cars are awesome too especially top fuel and funny car Love the NRHA Just subscribed SORRY know you’ve been working hard for a few years now promoting motorcycle drag racing hope you can get back over to the UK one day and check-out Stuart Crane @Warpspeed Racing and his boys/team they run in a few classes here but ALL very quick and great people. Our Guru is Roger Upperton no.1 tuner of anything Suzuki especially GSX’s or as you call them stateside GS’s Ray Debbens a lovely fella too and still a great racer Kawasaki Specialist.
Myself I have a GSX 1498....Oldschool 68” wheelbase with nitrous runs low 9,s potential for a lot more tho No bars street tyre and super street class Still road legal and mot’d Would be nice to race this season🙂. Bye for now....keep up the great work and Stay Safe. Best Wishes Always😉
When Bikes can Beat ALL CARS....Ill go back
My guys from Okc! Chaddy and Lucas! 💪🏾 💪🏾 💪🏾
i was there, thanks for the video jack
correction jack not a jet bike that is a rocket bike no jet engine pure hydrogen rocket the bloke has one mounted on a 10 speed bicycle if that aint crazy i dont know what is
🎉🎉🎉
Those 3 blondes 👱♀️ bikes were the fastest I ever seen in Mt life haha
jack did ya get the girls mi,ber playing piano can i have it ?
What does it feel like
H2O2
I was just was saying earlier today how I never really seen a cbr or just a Honda drag bike in general speak of the devil and he shall appear 😭😭😭😭
Charlie St Louis Missouri
Let's compare The grudge match Florida compared to other drag races 🤔
Hostile chaos👎 vs organized clean racing👍
Empty stands
Am i the only one who see the guy eat poop at 26 mins in after spider mans burn out ?
Salam dari indonesia
That hidrogen bike is faster than larry, and doesnt has wheelie bar
Wheelie isn't needed as it does not get propelled by back wheel , so can't wheelie ...🙄
@@RodgerMyers not EXACTLY true but its harder to get it to do so and can be fairly easily setup to avoid it with swingarm geometry.
Your mostly going to see it wheelie through track debris, a shimmy in the bars that kind of thing.
The whole not having a clutch is going to really help in not having it do it.
It is Exactly true that it is not rear wheel driven !!! Every motorcycle I've driven has been and that is the cause of a wheelie ... More power applied than what it takes to rotate the front end up . That is Exactly the reason for wheelie bars on drag bikes !!! A rocket bike does not propel the back wheel , it thrusts out of the rocket . Stability is an issue with anything that powerful , but the original comment about being faster than Larry and not even having a wheelie bar is what I responded to . The Pollution Packer was a Hydrogen Peroxide dragster that ran in the NHRA in the 70s ( from memory ) and went 4.6 and major speed for that time . It was not powering out the back door and was faster than the piston powered fuel cars then ... It didn't have wheelie bars either . I seen it run at Capitoln Raceway a few weeks after it set the record at a NHRA national .
" Not having a clutch ... " 🙄🙄🙄
@@RodgerMyers its a direct drive one RPM system, the main reason front wheel lift happens is therefore impossible. Well highly unlikely absent things like internal component failures. Bearings and similar.
It hits the maximum RPM possible for the system from the instant its ignited. It doesn't build boost/rpm waiting for the Christmas tree its a countdown triggered on/off switch.
This means you won't ever see a situation where a drive wheel speed overtakes the speed of the front wheel. If you had a clutch and could stage the thing, building pressure and preventing the rear wheel from spinning by disconnecting it from the system it would be entirely possible to wheelie it pretty much on command, Similarly you won't see the loading effectat causes things to wheelie when the engine rpm overtakes the drive wheel. There's a fair few Turbine bikes out there that have a quasi clutch or in the case of some models of the MTT Y2K a jackshaft arrangement that ensures the rear wheels rpm is linked to the turbine speed.
The turbine propelling several of the road going jet turbine bikes is essentially exactly the way this is propelled but with a means of either preventing the rear wheel spinning at all or simply allowing it to free spin in a way that means it won't overcome the braking systems.
The drag cars using jet engines and the drag jet bikes are their own special flavour of weirdness and are pretty much just a body and wheels with a full power jet and an afterburner button with a graduated switch that allows them with good brakes to stage the thing. Which is a fair bit more complicated than this rocket bike.
Its the same reason that a direct drive electric bike doesn't wheelie generally speaking outside of the weight balance being wrong. The motor driving the rear wheel goes from still to its intended rpm pretty much instantly. The problem is the instant 100% power the instant you ask for it gives its own problems as Hammond found out with the Rimac. You tell an electric motor to turn on at max rpm and it does with no spin up time.
If you were to use a rocket motor that you could graduate and have the wheels linked via something that ensures wheelspeed is linked to the power of the motor it would wheelie happily on command. The downside would be melting the bitumen and vht on the track and they tend to get fairly unhappy when the Jet Cars and bikes do that so you wouldn't win many friends at the track.
The lack of wheelie bars is for a couple of reasons. 1. The reaction that propels that bike is intensely exothermic, well in excess of a cars exhaust gas temperature. Hence why NASA use fuel to cool the nozzles on their stage 1 and boosters for the Shuttle as do spaceX. 2. The products that it vents out are likely to include some fairly nasty peroxides and an Ali set of framework behind the rocket motor would probably either best case end with melted ali on the track or worst case stripping the Aluminum Oxide layer off the metal and then allowing it to react with the water in the air around it which would be intensely exothermic. Which is why on the boosters recovered you see melted areas, chunks missing and misshapen parts even when using things like inconel.
Chemical rockets aren't particularly impressive tech wise nor are they particularly efficient. It's essentially 1940's technology strapped to a bicycle frame.
Given the internal Combustion engine is THE most thermodynamically efficient thing mankind has managed to build with 35% efficency possible and reasonably common its really not surprising a chemical rocket can't beat a forced induction, nitromethane fueled bike that has computer controlled ignition timing, fuel delivery and a gearbox that is computer controlled to ensure the minimum loss of power innrev matching.
Theres a reason we don't use chemical rockets outside of very limited circumstances in military roles where their comparatively small form factor matters like torpedoes.
Pretty fair video till it got to that Sorry A$$ time filler in the stocking hat at the end...
While US government employees fight....everyone at the races has FUN....
🇬🇧🎄✌🏻
WWE !!!! I bet you 80% of the people on your channel don't know you used to announce for WWF...
1st lates go
Ok,,so we need to lead the "we might be his good luck charm" lady off a steep cliff'....wow how irritating was she ??!!
Larry put an electric dry sump oil pump and an electric scavenge pump with a low pressure engine kill ßwitch you would free up a grip of hp by eliminating the mechanical pump I bet it takes 50 hp to turn the mechanical oil pump electric dry sump with a smaller light duty scavenge pump sucking oil from pan and into oil tank and if you change oil every run try 30 weight instead of 70 weight that shit is hard to shove threw the motor lighter good synthetic oil l I ke ypu use real I ne just go lighter weight I know kind of scary with the juice thinning out oil but change every run blow it out you will be ok im thinking them 2 things alone will give you 2 rents im thinking put you a head of everybody like you already are number one but Vantin is bitting on your ankles right there I think them two things will give you a pad between you and Vantin I was a friend of Elmer's I ran his head nuts on my turbo bike and I would always call hi. For advise he always talked to me never said to busy bye I miss Elmer he was awesome my brother was at indy when he got killed ny brother is gone now as well he sponsored Mr turbo to Ted Hoffmeister there turbo bike my brother built and owned sybaris hotel chain in the Midwest to built a gsxr1100 turbo for ken my bro to race it went faster with a smaller motor in it just like ken Tipton told me I'd be better off with a 1170 than his 1327 I didn't listen to ken but he was right as rain the 1170 would run circles around the 1327 big block with fins for street Tipton told me you can't benefit without a 5000 dollar head and balancing he was dead ok n the money with that advise should of listened to him
I like your channel content but the amounts of ads is absurd! Secondly, every fucking time I watch a launch, another ad! 👎👎