How to Fix Flash Drive Errors: The Drive Can’t Be Recognized, Wrong Size, RAW File System 🛠️👨💻🤔
Vložit
- čas přidán 30. 07. 2024
- 👍 Watch how to fix various errors and problems that may appear when you are using a USB flash drive. For example, the computer cannot see a flash drive, the flash drive became smaller, the flash drive is recognized in RAW format or Windows cannot recognize its file system, or you see the message ‘Insert disk’ when the flash drive is already connected and so on. I would like to note that these problems and the methods to solve them are also relevant for dealing with external hard disks and memory cards.
Recovering Files From a Flash Drive That Requires Formatting - hetmanrecovery.com/recovery_n...
Сontent:
0:00 - Intro;
0:33 - When you try to open a USB flash drive connected to your PC, Windows gives the error "Insert disk into device". What to do ?
0:59 - Run command line as administrator
1:55 - Full cleaning of the flash drive partition table
2:46 - Formatting a flash drive
For example, when trying to open a flash drive connected to the computer, Windows flashes the error ‘Insert disk.’ One quite easy and very effective way to solve such problems would be cleaning the disk and its partitions with the help of ‘Clean’ command and the ‘Diskpart’ tool. It is very important to remember that this process will erase the entire disk, so make sure that you have chosen the right device, otherwise you risk to delete data from the wrong disk.
So, to begin with, right-click on the Start menu and click on Command Prompt (Administrator). Before you continue, make sure that the USB drive, memory card or external hard disk which you are going to clean are now connected to your computer. Then enter the command "Diskpart" and then "list disk". Now we can see the list of all disks installed in this computer. In my case, I need to clean the flash drive marked as Disk 5. Be careful! If you choose a wrong disk number it will be erased and important data may be lost. After that, enter "select disk 5". That is, this command chooses the particular disk and all actions will now affect this disk. To clean the flash drive’s partition table, type in the command ‘Clean’ and press ‘Enter.’ After the process is complete, we can see a report saying that ‘Disk cleanup was successful.’ Now enter ‘Create partition primary’ (this way we create the main partition in the flash drive) and use the command "select partition 1” to choose this partition to work with. Now we need to format the flash drive in the chosen file system (for example, NTFS). To do it, enter the command "format fs=ntfs quick" (that is, we perform quick drive format). If we take away the word ‘quick’ then we will get regular formatting which takes up much longer. For example, let us choose quick formatting, press ‘Enter’ and wait until the process is 100% completed. Then assign a letter for this flash drive (for example, М) with the help of this command: "assign letter=M". As you do that, finish the work of ‘Diskpart’ with the command ‘Exit,’ close the command prompt, go to the Explorer and now we can see that our flash drive is completely operable. Just as an example, I will create a folder named ‘Test’ on this flash drive. As you can see, the drive works perfectly, and there are no problems.
If you liked this video, click the Like button below and subscribe to our channel to see more. Thank you for your attention and good luck.
Other videos: #FlashDriveNotRecognized, #FixFlashDrive, #RAW, #diskpart, #clean, #NTFS. - Věda a technologie
when the flash clean the command prompt says: DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information. how to solve that
i am also getting same issue
anyone ever find a solution for this
Cannot make any partition primary and cannot select any partitions. How could I solve this?
after the command clean it says 'DiskPart has encountered an error: The semaphore timeout period has expired. See the System Event Log for more information.' any suggestions?
cannot format it......what should I do.....when I format it it disappear and reappear again when the error pop up..pls help
my partition creation is failing and my USB is showing 0 bytes of free space and only 64 MB data but the USB is an 8 GB one please help
Omg. I have been wasting 5 hours searching for a solution. This video came out of nowhere and saved my USB. Just right in time before I give up
for me it says the parameter is incorrect :( can you help me?
Thank you very much for this video. Thank you again. You saved me
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
czcams.com/channels/u-D9QnPsAPn7AtxL4HXLUg.html
Thank you this worked great for my formatting problem
We are glad you found our video useful. If you have any questions, we are happy to answer them.
Fantastic!!! Thank You!!!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
czcams.com/channels/u-D9QnPsAPn7AtxL4HXLUg.html
Thanks a lot, you are the best I have subscribed to your channel!!!!!!!!!!!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
czcams.com/channels/u-D9QnPsAPn7AtxL4HXLUg.html
Wow Thanks! That Really Worked Thank You!
Thank you. I hope the above is useful to you.
Thank you sooooooo much!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
czcams.com/channels/u-D9QnPsAPn7AtxL4HXLUg.html
thank you u saved my usb
thanks it fixed my USB
i am very grateful thank you
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
czcams.com/channels/u-D9QnPsAPn7AtxL4HXLUg.html
please help me to fix this
disk part has encountered an error : data error (cyclic redundancy check). see the system event log for more information please tell me dear how to fix this.. 😔😔
Make sure you have an administrator rights on this PC
Make sure you run a cmd.exe like administrator, Start -> Run -> cmd -> Ctrl+Shift+Enter
@@HetmanRecovery had the same problem. tried with the administrator like u said but same error message came.
@@shreejay85 same here
For me it says no memory i have Cruzer blade 32gb but in system its says 64mb ,-,
Dragan Smoljanic same here, but I have a dual drive 32gb from sandisk it's 64mb and also RAW
thanks it works :)
Сontent:
0:33 - When you try to open a USB flash drive connected to your PC, Windows gives the error "Insert disk into device". What to do ?
0:59 - Run command line as administrator
1:55 - Full cleaning of the flash drive partition table
2:46 - Formatting a flash drive
Watch how to fix flash drive errors. Did you like the video? Click Like button and subscribe to Hetman Software channel. We will be glad to answer any questions in comments.
Thak you so much! I thought i had lost my 64GB USB drive!
We are glad that our video was helpful for you. If you have any questions, we will gladly answer them.
All steps up to the format command work, but then I get the message: Virtual Media Service failed:
The medium is write-protected.
Display under attributes volume:
Read only : No
Hidden : No
No default drive letter: No
Shadow Copy : No
Display under attributes disk
Current read-only state: Yes
Read only : No
Boot Disk : No
Paging File Disk : No
Hibernation File Disk : No
Crash Dump Disk : No
Cluster Disk : No
Why is the disk still "currently" write-protected?
Can you help me?
Hi , do you still need help ?
I want to keep the information on the flash drive.
it says that the parameter is incorrect
Please make screenshot with error and send me link. You can use this program for screenshot - app.prntscr.com/en/index.html.
Tristan Santos . same here, what did you do
wtf man my USB DRive is 16GB and i found just 5KB :3
you lose all data after reformate it.
yes
None of them working
It means, the flash drive is dead.
Formatting the USB erases all the data. Clearly, that's useless if you need to retain the files. You may as well throw it away and buy a new stick.
No backups??? SMH
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 111 GB 0 B
Disk 1 Online 931 GB 0 B
Disk 2 Online 7728 MB 0 B
DISKPART> select disk 2
Disk 2 is now the selected disk.
DISKPART> clean
DiskPart has encountered an error: Nem létező eszközt adtak meg.
See the System Event Log for more information.
DISKPART> clean
Make sure you have an administrator rights on this PC or the drive is broken