Boosted Board Brushless Motor Repair and Speedhack
Vložit
- čas přidán 21. 08. 2024
- This video explains how I repaired my Boosted Board Brushless Motor an also give it a speed increase. It also uncovers the cause of the rattling noise of the motors lot of us riders have to deal with.
Belts I used:
www.aliexpress...
20 teeth pulley
www.aliexpress...
Man you should make a bunch of these shafts and sell them on ebay!
Please do!!!
I’ll buy one and do it myself at home, I don’t have those CNC machines but I have a vice grip
I know a guy who makes these shafts...
Seth Mottahedeh I know the guy who makes the shafts @newyorkdiver
Barney Villalona can you give me his contact info
Hey dude. Boosted boards is shutting down. We need you to teach more people this method so we can keep our boards going. Any chance you could also help us crack their proprietary battery management system code?
venutech has a fix for rlod. he fixed my rlod battery
not sure if you saw but theres an easy-ish way to reset the RLOD without sending your battery in or soldering, its a video uploaded by user NomadNed, go take a look....shorting 2 pins on the bms circuit will trip it to reset.
This repairing tutor vedio is so detailed and professional, after watching I got deeper knowing of my boosted board and its motor. But there’s not a “factory” for me to DIY.
Excellent video, i don't have this problem but it was very informative. Boosted boards are the best.
That was a lot of work dude. I wish I can do that for my motors.
Fantastic video! An excellent exposé of the true problem and a brilliant tutorial method in your solution. Thank you so much!
Very simple tutorial! I will just do this each time my motor gets loose. just kidding, I'm not trying to be toxic. Too bad I wont find anyone like you here in Barcelona when my Boosted breaks 😭
Thank you for finally exolaib clearly what happens instead of most people who just say it's a bad bearing. This video was awesomem
Im pretty sure he even said the bad bearing is what caused the rod to get smaller.
The bearing was busted up, so did not spin freely and thus made the rod smaller in diameter.
Source: czcams.com/video/tcegApIP000/video.html
So he cleared it up alright, the bearing causes the issue of the rod getting smaller.
I think I would have attempted to shim the shaft before turning a whole new one. The trick with the copper wire is a new one for me. Nice
Amazing vid. Clear and easy to follow.. please do more
Great Video. Thanks for posting. You are a clever chap.
Much respect. Thank you for the video. Exactly what I was looking for. Take care
This is about to get a lot more hits
I guess... shocking news
Thank you I have 4 sets my mini s gos through them pretty bad no clue why I run a pretty loose belt gonna try to fix the motors 👍
Heya, same as others, I'd gladly be paying for your skills, time and effort. Couple of friends and i have a bunch of clicking motors :)
Great vid man
Awesome, thank you for the video!
Awesome video, thanks very much!
You said you are not a genius??
I say you wrong.
I have 2 motors that makes that noice. And 2 more on my boosted.
I wish you could fix them for me.
Awesome video! Where did you get the motor ?
Hi IPAS, have you considered starting a service to repair motors..? Where are you based/located..?
On an expensive board like this! All this motors shit storm issue was on Low quality bearing, boosted seriously....
An excellent experience is to unmount the motor of a booosted V2 "the motor with a black shiny paint", comparing the Bearing beetwen the 2 motors
Do you offer services?
Do you make or sell the These up graded Motors with the New pullies?
so did boosted get the motor thing figured out I don't wanna purchase a new stealth and have this motor issue happen!!
nice thank you :) but how you get the replacement parts ?
Hi man! Are you able to fix the motors? Would love to pay for your service - I have a 3 of those that would require repair ! Can I reach out to you somehow?
Sorry, making those shafts took me a pretty long time and machining is not really my thing. It was ‘just’ a project. I stopped riding and think about selling everything. I’ve read on reddit that there is someone fixing motors commercially.
I would be willing to buy some of these if you sold them.
or just make the motor and we will all buy from you!
So, any chance you have a diagram/measurements of the new shaft? I'd like to send the design off and get a few made.
The dimensions of the shaft I made can be found on hq.ipas.nl/
@@ipasthemaster is it possible change the 3m motor pulley to 5m pulley
曾博新 then you also need to change the wheelpulley to an 5mm and I dont know if these even exist.
@@ipasthemaster I plan to exchange the original boosted board truck motor mount with haggyboard.com/collections/haggy-drive-system/products/haggy-drive-system-2-in-1-street-and-all-terrain-version
@@ipasthemaster imgur.com/a/NgEgK4m front truck already changed .
Wow I’ll never buy a new motor again. All I need is a lathe lmao
I wish thet sold those shaft seperately
What is the technical specification of dc motor?
I have three boosted mini x with 6 messed up motors with this problem, I don’t have the time or equipment to fix this myself, who can I pay to have my motors fixed in this fashion ? I’ll pay for labor parts and shipping cost
I dont have this equipment anymore, but do have.a bunch of repaired motors like these. I am willing to sell them
@@ipasthemaster is this still the case? Regards from a half dutch half Norwegian in need of new motors 😄
@@ipasthemasterAre motors still available?
how have they held up ?
hi do you sell repair kit axis pulley ets...?
How much would you charge to do that to my motors?
cool video ....too much work tho ....ill just buy another motor......
Step 1: have a machine shop
What size are those motors? 5045?
Where did you got the bigger pulley for the motor?
Aliexpress. Search for 3m pulleys.
Hi, what type of aluminum rod did you use for the shaft?
I used several types. These where steel rods, not alluminium. Most of them I bought on Aliexpress. Some where chrome-plated and had a very nice finish. Normally the rods where sold as 3d printer parts
@@ipasthemaster Thank you very much
IPAS PROJECTS after your shaft replacement did you find to last longer than BB shafts? Under replacing procedure you have used set on new bearings as we’ll correct? I’m concerned about boosted service now Days and trying to prepare for that common issue. Even was trying find aftermarket motors but no luck i guess probably would be possible if we had some schematics for wiring.
Do you offer repairs for my motors?
Can I please send you my two motors and pay you to do the same thing
No sorry. Cant do that. It is a very time consuming proces.
Hi Ipas Projects - can we connect via email?
If I send my motors in. Can you put the 20teeth pulleys on mine I'll pay you!
Even though it looks easy in this video, making a shaft is pretty time consuming. So sorry I cant do this for you.
Listening to you. I can tell you are not from usa. ( loucky you)
But if you are. Can you help me fix my motors ?
Hi. Do you accept money or money
Or I can spend $100 for someone to do this for me. It’s gonna cost me thousands for any of those tools. Lathes aren’t cheap, but someone doing it for me and applying methods to prevent this (better materials) is. :D
There is a guy on IG who makes this.... @newyorkdiver
Please take my money
Anyone in EU who could create me a new shaft and send it to Czech Republic ?
"you get what you pay for" -every sucker who shilled out over a grand for cheap crap and still swears by boosted
Hi, I have cash : )
Do you have an email adress?