Video není dostupné.
Omlouváme se.
How To Install Run Brake Turn LED Lights on a Harley
Komentáře • 55
Další v pořadí
Automatické přehrávání
How To Install LED Light To Rear Fender Of An Iron 883Sandman Rides
zhlédnutí 12K
HOW TO: LED Tail Light Install / Remove Stock Tails - Harley Iron 883 SportsterBLOCKHEAD
zhlédnutí 166K
How to Install a Model A Tail Light on a HarleyDKCustomProducts
zhlédnutí 19K
Chocolate Screwdriver! 🔩 Always have the right tool for the job! #amauryguichon #chocolateAmaury Guichon
zhlédnutí 43M
The Real Process of Harvesting Honey 🐝🍯 #funnycats #funnyvideo #reaction #honeyMeowtropolis
zhlédnutí 3,9M
Replacing a valve on a full water tank! 🫣💦 - 🎥 the_ladyplumberUNILAD
zhlédnutí 125M
Pick a Color, I'll Buy 🟪🟨Brianna
zhlédnutí 33M
How to Wire Motorcycle LED LightsClassic Octane
zhlédnutí 670K
HOW TO: Install 2 to 3 wire taillight - Harley Davidson SportsterFreebird’s Garage
zhlédnutí 30K
CHEAP Amazon Taillight from MOVOTOR | LED Turn Signals For Harley Dyna & SportsterTwins Moto Garage
zhlédnutí 36K
Harley Davidson Dyna Convertible FXDS // Tail LightLemonhead Garage
zhlédnutí 9K
Imzz Elite | How-To install the Custom Dynamics curved LED license plateImzz Elite
zhlédnutí 11K
Advanblack EDGELINE LED Clamshell Saddlebag Run Brake Turn Signals InstallAdvanblack
zhlédnutí 4,7K
How to install Load Balancing Resistors to Fix LED Turn Signal "Hyperflash" on any Motorcycle!TSTindustries
zhlédnutí 58K
$0.83 eBay Cafe Racer LED Tail Light - Install and WiringLetterbox Workshop
zhlédnutí 17K
2024 Harley-Davidson Open House 4K/60pHarley-Davidson Breakout
zhlédnutí 575K
FIZI DRINK VS. COCA COLA? Co je zdravější? #shorts #marcel #cocacola #fizistyleMARCEL
zhlédnutí 176K
11 year TRICKS Magnus Carlsen? 😱 #magnuscarlsen #chessChessBase India
zhlédnutí 12M
My Bed On Different Days #ShortsLuke Davidson
zhlédnutí 13M
Sunglasses Didn't Cover For Me! 🫢Polar Reacts
zhlédnutí 5M
Koupím Barče Cokoliv Co Trefí Šipkou!DodoCZ
zhlédnutí 127K
Box jumping challenge, who stepped on the trap? #FunnyFamily #PartyGamesFamily Games Media
zhlédnutí 29M
Send this to an artist to make them… 🫢✨🎨 #artistomgArtistomg
zhlédnutí 15M
Why Is He Unhappy…?Alan Chikin Chow
zhlédnutí 99M
Nice vid, thanks. Are you also running strut lights at the end there? Strut light wires splice into the Stealth wiring you just completed?
Nope, ditched the lights on the struts. Just running the www.dkcustomproducts.com/universal-fitment-stealth-led-run-brake-turn-lights-dk-rbt-led-uni.htm which are wired as shown in the video. You can also see the written instructions at this link- www.dkcustomproducts.com/media/wysiwyg/electrical/lights/turnstuff/rbt/uni/UniversalStealthRun-Brake-TurnLED.pdf
Supporting a Colorado biker 💪🏼💪🏼💪🏼💪🏼
😎✌
for those out there who are doing this... i know DK custom sells a plug n play cable ready to just plug for 50ish bucks... I love dk custom great customer services, parts are on point every time, but if you`re doing the swap save yourself the 50bucks... you can just cut the wires from the original lights that alrdy have the female adapter and connect them with the stealth lights that dk gives you saving you more than 50 + dollars just solder them or bind them to your hearts desire. they have 2 options stealth lights for $119 or the stealth lights with plug n play for $218.
Yeah, agreed. Some folks like the plug-n-play, but not necessary at all if you want to wire them up yourself.
thanks for replying i am trying to get any info on the problem.Larry B
So I think the running lights lead is 5V and when the brakes are engaged, 12v's is allowed through the line and rides over the 5v's.
On the Stealth LED Run Brake Turn lights, which you can see at this link- www.dkcustomproducts.com/universal-fitment-stealth-led-run-brake-turn-lights-dk-rbt-led-uni.htm
The electronics for sending the signal over the wires to have the full function of Run-Brake-Turn are built into the unit.
If you look at the photo linked below, you will see that there are wires with a yellow section that is housing the electronics for the RBT.
www.dkcustomproducts.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/r/b/rbt2.jpg
6:05 little dreamer. This guy knows his tunes
Is it possible to do this w/o using the specific wiring kit used here to split 1 wire into the running and brake? ( ie. Add a wire and tie it in that way?) Have a 3rd party tail light system but no way to wire my brake light as running...
You should be able to use the Universal RBT at this link- www.dkcustomproducts.com/universal-fitment-stealth-led-run-brake-turn-lights-dk-rbt-led-uni.htm
You can definitely have one wire to the lights going to two wires on the bike, and vice versa.
Here is a link to basic wiring principles- www.dkcustomproducts.com/media/wysiwyg/electrical/HowToWiringonaMotorcycle.pdf
And here is a link to the instructions on wiring up the Uni RBT- www.dkcustomproducts.com/media/wysiwyg/electrical/lights/turnstuff/rbt/uni/UniversalStealthRun-Brake-TurnLED.pdf
So, when you bring the two wires into the dual element, where does the one wire on the other go on the light. I've got three leads, not two on the light side.
Please email or call us with the details of what bike you have, and what lights you are installing.
Also, you may find this video and written instructions useful-
czcams.com/video/7zlUOPODLUA/video.html
www.dkcustomproducts.com/media/wysiwyg/electrical/HowToWiringonaMotorcycle.pdf
Support@DKCustomProducts.com
662-252-8828
hi.. nice video very informative... do you know if you can use a break module with that light?
Yes, the link below is a Run-Brake-Turn Module that we know works with it...there are others too...but this is one that we have installed and many of our Customers have used it also- www.dkcustomproducts.com/run-brake-turn-module-for-led-lights-strobe-brake-option-dk-led-rbt-mod.htm
Ty for the vid
Thanks for the comment, glad you found it interesting/useful. 👍
Can we install without removing the stock turn signal?
Yes, The Run Brake Turn LED lights can be used in conjunction with your factory signals.
You can go to the link below and scroll past the pictures and click on the instructions tab if you would like to see how to wire it to accommodate factory signals and this light. - www.dkcustomproducts.com/stealth-led-run-brake-turn-lights-true-plug-n-play-sportster-dk-rbt-led-pnp.htm
Please feel free to contact us with any questions you might have:
Support@DKCustomProducts.com
662-252-8828
Thank you for commenting!
Hi, I have a 2006 HD Sportster 1200xl, would those work without having the module installed?
Everything about fitment is at this link- www.dkcustomproducts.com/universal-fitment-stealth-led-run-brake-turn-lights-dk-rbt-led-uni.htm
You can see what will function and not function without a RBT module.
Thank you sir, helped me out on my street Bob 114
Glad to hear it, thank you for the feedback.
I was connecting tail signals to my 2008 sporster where I had only 3 cables and lights had 4 cables. I've looked up and try all possible ways to connect it so I did, and it has a running light and stop light but when I use turn signal I lose the stop lights, it's like a turn signal erase stop light after I use it. Let's say I use left signal and right after there's a stop light only in the right one, o use right signal and now I don't have a stop light in both of them, and I can reset this process by turning off ignition and turn it on again. Need help.
Where did you buy your tail lights? If it was from us, give us a call or email.
Support@DKCustomProducts.com
662-252-8828
If it was from someone else, give them a call. It is doubtful we can help you with tail lights that are not ours.
The link below we give the basics of motorcycle wiring, and it may be helpful to you.
www.dkcustomproducts.com/media/wysiwyg/electrical/HowToWiringonaMotorcycle.pdf
Do you sell just the dual element circuit wires (2 into 1 for brake and running lights)?
We do have them, we use them when making our lights. We do not have them for sale separately, however, we can do that for you.
We are in the middle of moving our manufacturing facility to a new location.
If you will wait until after July 5th and send an email or call and ask for Devin, he will be able to help you at that time.
Support@DKCustomProducts.com or 662-252-8828
@@DKCustomProducts thank you for the quick response, I'll hit up guys up after the 4th of July holiday👍
What pipes u got there? Sounds great!
Do you sell this exact light kit for license plate?
Not sure which light you are asking about, but you can see all the lights we have at this link- www.dkcustomproducts.com/license-plate-relocation-c94.htm and this link- www.dkcustomproducts.com/tail-lights-relo-kits-c111.htm or you can contact us at Support@DKCustomProducts.com or 662-252-8828
you need to add a load equalizer in the turn signal wiring harness or your turn signals will stop working after a while. Larry B
This is true in some circumstance, but less and less. If the bike already came with LED's, a load equalizer is Not needed. If you are keeping incandescent bulbs on the on the front, then a load equalizer is not needed. There are exceptions, but all the details can be seen at this link- www.dkcustomproducts.com/universal-fitment-stealth-led-run-brake-turn-lights-dk-rbt-led-uni.htm
@@DKCustomProducts i have a 2008 1200 with incandescent bulbs in the front and led brake light and turn signals in the back that"s why im having so much trouble. Larry B
@@tinakee7485 Always feel free to give us a call or email us at Support@DKCustomProducts.com , we are there to help out.
wouldn't the plug and play work on that dyna? isnt the plug ins the same as the sportster? i got the same bike, 2017 low rider S , hope to hear back from you, would be easier to plug and play thank to solder and such.
I believe it does have the same connectors at the Sporty...but we wanted a video showing how to do the Universal Installation. :)
ok thank you very much! love your products ! did a lot of upgrades on my iron 883 before i traded the sporty in for my low rider S you will be getting a lot of business from me in about a month or so :P
We appreciate it. Call or email anytime with any questions.
is it legal to have the license plate sideways?
Yes as long as it's legabel
Hey I got something I want to ask you but I can't find anywhere to message you.
I have a question about using this product on my 2016 softail slim flss I bought viking bags and need to move my ride run turn rear lights and lic plate can I use this instead and just move the plate to the rear fender and remove the stock run ride lights?
Support@DKCustomProducts.com or 662-252-8828
message me here
Silver solder, stay clean lead free flux
Good idea always.
Jesus $119.00 for that? Y'all must be tripping.
You can buy Chinese, that has no warranty, that does not support US Citizens or economy, and that may or may not work, and that is not as bright, and that has no Customer service.
A pair of turn signals go for around 160 sooo...
There's a flexible led on Amazon for like $15 that does the same thing if you wanna go budget friendly...to each their own...not sure why you'd complain about something you're not buying...props to DK for being a small business with solutions to things people wanna do...others just bitch about shit and do nothing 🤷🏻 the choice is yours