Wall Factory: Create Fort or Tunnels Using Blender's Built-in Add-on

In this Blender tutorial, we have discussed Blender Wall Factory which is a built-in add-on. It can help us to create different types of walls. We can also create tunnels, bridge, fort etc. Please watch the video for the complete tutorial. If you have any question on this tutorial, please leave your comment below.
𝐉𝐨𝐢𝐧 𝐨𝐮𝐫 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐛𝐥𝐞𝐧𝐝 𝐟𝐢𝐥𝐞 & 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐩𝐞𝐫𝐤𝐬 👉 / 5minutesblender
𝐅𝐨𝐥𝐥𝐨𝐰 𝐮𝐬 𝐨𝐧 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 👉 / 5minutesblender
𝐓𝐡𝐚𝐧𝐤𝐬 𝐟𝐨𝐫 𝐲𝐨𝐮𝐫 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧𝐬 👉 donorbox.org/5-minutes-blender
==================================================
We have many more tutorials that can help you learn Blender like a professional. You can go through the following playlists for the relevant topics:
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐅𝐨𝐮𝐧𝐝𝐚𝐭𝐢𝐨𝐧 𝐂𝐨𝐮𝐫𝐬𝐞 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬:
If you are absolutely new to Blender, take this foundation course.
• Blender Foundation Course
👇 𝐀𝐥𝐥 𝟏𝟐 𝐂𝐥𝐚𝐬𝐬𝐞𝐬 𝐓𝐨𝐠𝐞𝐭𝐡𝐞𝐫 𝐈𝐧 𝐎𝐧𝐞 𝐇𝐨𝐮𝐫:
• Blender Foundation Cou...
👇 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 𝐓𝐢𝐩𝐬 𝐀𝐧𝐝 𝐓𝐫𝐢𝐜𝐤𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Blender Tips & Tricks
👇 𝐄𝐚𝐬𝐲 𝐌𝐨𝐝𝐞𝐥𝐬 𝐅𝐨𝐫 𝐁𝐞𝐠𝐢𝐧𝐧𝐞𝐫𝐬 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Easy Models For Beginners
👇 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐘𝐨𝐮 𝐍𝐞𝐞𝐝 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Materials You Need In ...
👇 𝐀𝐥𝐥 𝐓𝐞𝐱𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Text Effects In Blender
👇 𝐂𝐚𝐦𝐞𝐫𝐚 𝐌𝐨𝐯𝐞𝐦𝐞𝐧𝐭 & 𝐒𝐞𝐭𝐭𝐢𝐧𝐠𝐬 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫:
• Camera Movement & Sett...
👇 𝐔𝐬𝐞𝐟𝐮𝐥 𝐋𝐢𝐠𝐡𝐭𝐢𝐧𝐠 𝐒𝐞𝐭𝐮𝐩 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Useful Lighting Setup ...
👇 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐏𝐡𝐲𝐬𝐢𝐜𝐬 & 𝐑𝐢𝐠𝐢𝐝 𝐁𝐨𝐝𝐲 𝐂𝐨𝐧𝐬𝐭𝐫𝐚𝐢𝐧𝐭𝐬:
• Rigid Body Physics in ...
👇 𝐅𝐢𝐫𝐞 & 𝐒𝐦𝐨𝐤𝐞 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fire & Smoke Simulatio...
👇 𝐅𝐥𝐮𝐢𝐝 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐈𝐧 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Fluid Simulation in Bl...
👇 𝐌𝐚𝐬𝐭𝐞𝐫𝐢𝐧𝐠 𝐁𝐥𝐞𝐧𝐝𝐞𝐫 (𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬):
• Mastering Blender
If you want to watch our own creations in Blender, you can also check out the following channel where we regularly upload videos on Animation, Space Exploration and AI.
𝐎𝐮𝐫 𝐨𝐭𝐡𝐞𝐫 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐥𝐢𝐧𝐤: / @thealienworld
#Blender #Animation #Tutorial #Modeling
Timestamp
00:00 How to enable Wall Factory
00:29 Various settings in Wall Factory
03:07 How to create a tunnel
03:59 How to create a fort
06:58 How to add more openings

[@georgb302]

I have Extra Objects enabled for years, never looked into Wall Factory. Thank you.

[@5MinutesBlender]

Glad I could help! 😊

[@user-rj2gg4uv1j]

Looking for ways to build a building brick I found this video. It's incredible. It's so simple!!! Thank you for the good tutorial❤

[@5MinutesBlender]

Glad I could help! Cheers! 😊💝💝

[@shycat3d]

Always love your tutorials! They have nice introduction to many mechanics
:D

[@5MinutesBlender]

Thank you so much! Glad you liked this tutorial 😊

[@mithx_creator]

Amazing tutorials easy to follow 🎉 I am started your tutorials very long.

[@5MinutesBlender]

Glad you like them! 😊💝💝

[@Yaroslav_A.]

Nice tutorial. As always! :)

[@5MinutesBlender]

Thank you 😊 Glad you liked it! 💝

[@Altitude962]

Nice tutorial again thank you,i have some problems sir,
I have made simple character, and add shapekey to movement of mouth,but when i add f- curve on graph editor the mouth movement doesn't show properly,like mouth doesn't open every time,some times it gets stuck,i need graph editor setting to make mouth movement accurate with audio,please help me,love from india

[@5MinutesBlender]

How did you add the shape keys? Using some add-on or did you convert the sound clip into f-curve?

[@Altitude962]

@@5MinutesBlender sound clip to the f curve

[@5MinutesBlender]

@@Altitude962 Ok, please take a shot on one such instance where the mouth is not opening despite having the correct f-curve. I suspect that the f-curve conversion is not perfect in your case. Remember there are various settings like frequency ranges that affect this conversion. Sometimes after the f-curve conversion, you may need a bit of manual adjustments on the curve to match it perfectly with your desired motion.

[@Altitude962]

@@5MinutesBlender thnk you very much sir

[@DesertVox]

I can't reset the Wall Factory to its original settings. This add-on is weird. It doesn't provide an intuitive way to do that.
PS: I found a way to reset the wall, which is by exiting Blender and re-opening it.

[@5MinutesBlender]

Yes, that is the standard behavior of all blender operators unless otherwise is specifically implemented. You need to reopen the file to reset the defaults.

[@meharhuzaifa173]

Hi bro
I have AMD rx 480 graphic card but it does not supports blender.
it means blender just runs on nvidia graphic card or not ? please guide me

[@5MinutesBlender]

As far as I know Blender can run with AMD card. In fact, having a graphics card is not mandatory to run Blender, all functions can run just on CPU (although it will run slow). What error do you get, what does it say?

[@meharhuzaifa173]

the notification apears on preferences tab that no capable GPU found.Requires an NVIDIA GPU with compute capability 3.0@@5MinutesBlender

[@5MinutesBlender]

@@meharhuzaifa173 Ok, you can ignore that warning. Probably Blender does not support your particular GPU (but Blender does support selected AMD graphic cards starting 3.0 version, not all though). In this case all operations on your machine will happen through CPU, including Cycles rendering. It will be slow but it should still work. If Blender gives any other warning or error while actually working with it, please let me know.