The LCS SK-19 can, if the barrel is not installed to the correct distance from the magazine, hang up and the mag will not rotate. Very easy fix on both. Good video. The airgun world is lucky to have such wonderful designs.
It is because of your videos and the attention to detail that firmed up my decision to buy this particular air rifle. The flexibility of this unit is amazing! I recently ordered a compressor and air tank so that by the time my new rifle arrives I’ll be ready to rock! I’m now on the waiting list (oh how I hate 😡 to wait!😁) for the 22/250 mm rifle. Keep the vids coming Brian👍
I am anxiously awaiting the call from Edgun west saying that my Leshiy 2 has arrived. I got my FX impact mkll .35 last week. Time to compare and see which I want to buy for my wife as these two are mine (she claimed the Leshiy 2 already)
There is no such thing as a power plenum. This is just vapor. When Ed a d his team were testing plenums from the largest to the smallest they got less than a 3% change. Power plenums are for traditional guns. Not the Leshiy 2
I just received my leshiy. It's very well built. I'm assuming the regulator is set at 130. How can you adjust the regulator or just use the power pucks. How should I drill it out for more power
I have a LCS SK 19 30 cal. I love my gun, super accurate. A bit heavy for hunting. i was considering getting one of these. Would you recommend this gun for hunting ?
@@jeremielibraty7 so what I would recommend is if.you want to permanently reduce the power decrease the regulator setting. The puck does not increase shot count.
@@edgunwestLLC okay perfect and wow it's regulated huh? You think I'll get under 1 inch group at 50 yards? Can't wait to get mines! How do I adjust the regulator. Once again thank you for your help and support 🙏
The .22 with the large power puck got some serious bark to her,not sure about backyard friendly,but what’ a gun. Don’t shoot it with no mag in guys you have been warned!
A lot of factors go into the price. For example this valve technology has been in R&D for 7 years. Secondly the Butt stock holds 4500 psi. This is A little different than making an AR 15 six position but stock. This kind of pressure requires special door aluminum that is flexible and strong. Also a lot of moving parts and precision parts go into a gun like this ability to regulate from 300 bar pressure to less than 100 all the while keeping a consistent speed throughout the power band. This gun is also “with match grade barrels near me to the same standard as any fire and barrel these are quite expensive and also imported I hope this helps you understand why cans like this are so expensive,
@@dangerous8333 nothing. I think they are expensive because they aren’t exactly flying off the shelf. Like anything else that’s new it’s expensive until they start selling to recover cost of development then the price goes down but I don’t think these are selling. If I was gonna pay that much for a rifle it would be a 50 cal. Just my opinion
The LCS SK-19 can, if the barrel is not installed to the correct distance from the magazine, hang up and the mag will not rotate. Very easy fix on both. Good video. The airgun world is lucky to have such wonderful designs.
Just got mines today!! What a way to start 2021
Thanks for a very educational video on the awesome leshiy2 👍 stay safe all and happy hunting/shooting
It is because of your videos and the attention to detail that firmed up my decision to buy this particular air rifle. The flexibility of this unit is amazing!
I recently ordered a compressor and air tank so that by the time my new rifle arrives I’ll be ready to rock!
I’m now on the waiting list (oh how I hate 😡 to wait!😁) for the 22/250 mm rifle.
Keep the vids coming Brian👍
Great technical support.
What an amazing gun. Can’t wait for more of your videos. I wish I could try one! Aloha!
I am anxiously awaiting the call from Edgun west saying that my Leshiy 2 has arrived.
I got my FX impact mkll .35 last week.
Time to compare and see which I want to buy for my wife as these two are mine (she claimed the Leshiy 2 already)
Me too! October 15th will be exactly 2 months. He ignores emails
Nice job. I wish i had the money to get this sweet gun
Pcp yang bagus dan unik bro!!!👍
Napaka ganda.kahit yan lang hadiah ko.darating n pasko., 😁😊😊
Gute Demonstration !
Gosh, I hope I could get mine by the end of the year (not live in USA)
Please make a video on the power plenum, and what result it brings and how to tune the regulator. Thanks for the great videos !
There is no such thing as a power plenum. This is just vapor. When Ed a d his team were testing plenums from the largest to the smallest they got less than a 3% change. Power plenums are for traditional guns. Not the Leshiy 2
@@edgunwestLLC That would mean that I got duped, thanks for clearing that up,
If I have the .177 and go to a .25 barrel but don't change the puck what will this do?
Are the Alpha barrels used in all calibers of this model?
Produk senapan yang luar biasa👍👍
What is the standard power pucks hole diameter for 0.25 caliber ?
Hi what puck size and reg pressure and jets will give me 11.5 in my sub 12 177 leshiy 2 with the 350cc bottle fitted
Thanks
Hello.
you say at 177, the pressure is 110 bar.
which nozzles are installed there
thanks
What would the power change to with the full open power puck? From around 12 foot pounds to what?
i saw another video on replacing that roller bearing with a metal one
Mantap
I just received my leshiy. It's very well built. I'm assuming the regulator is set at 130. How can you adjust the regulator or just use the power pucks. How should I drill it out for more power
Give me a few weeks I'll put out a video explaining everything
Are you currently filling the back orders?
I have a LCS SK 19 30 cal. I love my gun, super accurate. A bit heavy for hunting. i was considering getting one of these. Would you recommend this gun for hunting ?
It is primarily a hunting gun. A great choice if you are going to walk or hike while hunting
does it possible to have narrels with standard thread 1/2-20 unf? it will be better if we want to use external suppressor without adding an adaptator
no they won't be changed, all airgun silencer companies I am aware of offer M14
Can you shoot slugs at more than 1000 fps with?
Good👍... like
nice, thanks for the detailed info. what diameter are those barrels?
14mm
Đẹp quá
great
I am waiting for delevery
hi, I'm from Brazil, how can I buy one of these?
Can you put a single point tactical sling on it?
Yes
Wow
Price pls..
IS it each one who explin me if hé has any problèmes , please
سعر بدولار
Still waiting for my gun when is it coming in?
Placed my deposit on 8/15 as well, emailed him several times but no response
Scott Weaver… I placed my deposit on 7/4 more than a month ahead of you looks like it’s going to be 4 to 6 months before we get anything
@@chrisungureanu6184 Thank for the reply let’s hope for the best!
How much are the EDgun Leshiy 2’s? I am looking to buy one but I don’t know how much they are.
Hi which barrel length do you recommend? 25cm or 35cm?
Personally I prefer 35CM
Personally I prefer 35CM
I just got my Leshiy2 30cal.(09-24-21) but no manual. I’m so disappointed.
How big of a hole exactly does it need to get 12 foot pounds in .22 250 mm?
2.8mm
That's literally perfect. What kind of shot count am I looking at with 12 foot pounds?!
@@jeremielibraty7 so what I would recommend is if.you want to permanently reduce the power decrease the regulator setting. The puck does not increase shot count.
@@edgunwestLLC okay perfect and wow it's regulated huh? You think I'll get under 1 inch group at 50 yards? Can't wait to get mines! How do I adjust the regulator. Once again thank you for your help and support 🙏
@@jeremielibraty7 not with a 250mm barrel, you'll need a longer barrel for 1" groups at 50 yards... 450mm +.
Vietnam
Hola de Costa Rica buen video y lindo modelo que precio y si puedes mandarme la página web para mandar a comprar una porfa gracias
edgunwest.com
I live in Vietnam, how can I buy it
Berapa harga nya bos
i love how google ai is my friend, I just asked how to do this,.
Gia
give me this please, I really want this, but I can't buy it, no money
The .22 with the large power puck got some serious bark to her,not sure about backyard friendly,but what’ a gun.
Don’t shoot it with no mag in guys you have been warned!
С этого ролика понял больше, не зная языка, чем с русских!!! Ну почему так?!
Why are these so expensive? It’s a honest fair question
A lot of factors go into the price. For example this valve technology has been in R&D for 7 years. Secondly the Butt stock holds 4500 psi. This is A little different than making an AR 15 six position but stock. This kind of pressure requires special door aluminum that is flexible and strong. Also a lot of moving parts and precision parts go into a gun like this ability to regulate from 300 bar pressure to less than 100 all the while keeping a consistent speed throughout the power band. This gun is also “with match grade barrels near me to the same standard as any fire and barrel these are quite expensive and also imported I hope this helps you understand why cans like this are so expensive,
@@edgunwestLLC thank you. They are sweet lil rifles for sure I wish I could afford one
@@dangerous8333 nothing. I think they are expensive because they aren’t exactly flying off the shelf. Like anything else that’s new it’s expensive until they start selling to recover cost of development then the price goes down but I don’t think these are selling. If I was gonna pay that much for a rifle it would be a 50 cal. Just my opinion
It's a toy toy
Gun
Too expensive.
I agree. Everything's too expensive though 😂. It is the coolest looking air gun on the market IMO.
Sehr störanfällige Waffe, ich musste diese Waffe 2 mal Wandeln und habe mir dann mein Geld zurückgeben lassen. Keine Kaufempfehlung!!!
Ihr Händler konnte das Problem nicht beheben? Ich falle aus allen Wolken!