I just picked this up today at salvation army! I paid 3.99 for it! I seen it and I was like damn that is a sweet apache and looked valuable. I love it.
Hi HumanMechanism, Can you redo your review of the BBI Hind for our fellow subscriber Cameron Browning as he is considering buying one soon. Grateful if you could help him out. 👍
I know that this is an old review but you forgot to mention the licensed version made in Japan by Fuji of the Apache for the Japanese Self Defense Force. They also have the licensed version of the Longbow.
What did you do to your first channel because I really need that elite force hind review because no one else did a review on it because i'm about to buy it can you please remake the review plz and I love all of your videos
I have a question about this model. Do you think its to big for the 3 3/4 figures? Because I have the same model but to me it so big. I have gi joes too but is the helicopter really that big to compared to real life? Please let me know what you think. Thank u..
Excellent review of an awesome piece. I have a question for you and I'm hoping you have the answer or can direct me to a site. I have and have had one of these bought new many years ago. I need to take it apart but can't get the rear tail section separated from the front of the fuselage. It will begin to separate on one side about 3mm or so then that's about as far as I can get it to go. I do not want to break it so I do not push any further. Do you know how to disassemble the tail boom section from the front part of the fuselage? Is there a trick to it or?
Unfortunately, after many failed attempts, I was unable to disconnect the tail section. This is something that I've actually been struggling with for many years. Part of the problem is that I bought this chopper loose, with the tail section already attached. Thus, how it was attached when taken out of the box is a mystery to me. :/
Ok understand. The riddle continues, lol I really appreciate you getting back to me so quick!!! If I get it figured out I will update you here. Thanks again and have a good one, David
Hey there, Great Channel!!! The tail sections on the bbi helicopters are connected with some built in flexing clips I would call them. I would try gently heating the connecting area of the tail section with a hair dryer, perhaps that would loosen it and give it enough flex to pull it apart. You should not have to heat it too much, and when it cools it will be rigid and ready to snap into place again.
You seem to enjoy your Apache. You also seem to know alot about the 1:18 scale models. Maybe u can answer this for me. Bbi elite force came out with, its limited edition of the Blackhawk, the hornet, the falcon, the phantom, and the me-109. Why not the apache. The only helicopter that I’m missing. Can u answer me that.
They only brought out the blackhawk Nightraid, f18 hornet Sidewinder, f16 falcon Endurance, there was never a f4 Phantom in 1/18 released only 1/32 by BBI. As for why no Apache or littlebird, Kiowa or any of the other items, I guess Sunnyside toys didn't buy or have the rights to reproduce them as the original and best BBI went out of business back in 2002. The current BBI items are getting smaller and some are not true 1/18😭
Foxy The Pirate Fox, Hi,😆 HumanMechanism and i are in the process of uploading all BBI and 21st Century Toys plus other 1/18 related models so keep an eye out 👍
![1/18 BBI Elite Force MH-60G Pavehawk/Blackhawk Helicopter [1st version] (part1)](http://i.ytimg.com/vi/gulOARKEsAE/mqdefault.jpg)
I just picked this up today at salvation army! I paid 3.99 for it! I seen it and I was like damn that is a sweet apache and looked valuable. I love it.
My only gripe is that for such outstanding detail. The pitch links are on top of the rotor head. They should be underneath.
Hi HumanMechanism, Can you redo your review of the BBI Hind for our fellow subscriber Cameron Browning as he is considering buying one soon. Grateful if you could help him out. 👍
I know that this is an old review but you forgot to mention the licensed version made in Japan by Fuji of the Apache for the Japanese Self Defense Force. They also have the licensed version of the Longbow.
Fantastic!
Definitely
Was looking for a vid to see what it looks like before I met up with someone off offer up. Got 2 of these for $60. 12/20/18. Ebay it's like $160.
I also have the 21 Century Huey that seams just a little too small not much but it works a little better with my GI Joes.
This is a good toy
Do you think that BBI Elite Force will ever give us a USAF F-15 Eagle and/or even an USAF F-22 Raptor toy (s)? Or an A-10 Warthog attack aircraft?
WILLIE FRANCIS a 10
こんにちは、日本に住んでいる者です。
BBI 1/18 アパッチ 私も持っています。
What did you do to your first channel because I really need that elite force hind review because no one else did a review on it because i'm about to buy it can you please remake the review plz and I love all of your videos
czcams.com/video/cODyRCp9PQE/video.html
Best helicopter
I have a question about this model. Do you think its to big for the 3 3/4 figures? Because I have the same model but to me it so big. I have gi joes too but is the helicopter really that big to compared to real life? Please let me know what you think. Thank u..
Can't buy it anywhere??? Black Hawk with guns, Apache and Warthog plane or harriet jump jet would be my wish set
Excellent review of an awesome piece. I have a question for you and I'm hoping you have the answer or can direct me to a site. I have and have had one of these bought new many years ago. I need to take it apart but can't get the rear tail section separated from the front of the fuselage. It will begin to separate on one side about 3mm or so then that's about as far as I can get it to go. I do not want to break it so I do not push any further. Do you know how to disassemble the tail boom section from the front part of the fuselage? Is there a trick to it or?
Unfortunately, after many failed attempts, I was unable to disconnect the tail section. This is something that I've actually been struggling with for many years. Part of the problem is that I bought this chopper loose, with the tail section already attached. Thus, how it was attached when taken out of the box is a mystery to me. :/
Ok understand. The riddle continues, lol I really appreciate you getting back to me so quick!!! If I get it figured out I will update you here. Thanks again and have a good one, David
No problem! :)
Hey there, Great Channel!!! The tail sections on the bbi helicopters are connected with some built in flexing clips I would call them. I would try gently heating the connecting area of the tail section with a hair dryer, perhaps that would loosen it and give it enough flex to pull it apart. You should not have to heat it too much, and when it cools it will be rigid and ready to snap into place again.
donde lo puedo comprar un link
Where can I buy one
You seem to enjoy your Apache. You also seem to know alot about the 1:18 scale models. Maybe u can answer this for me. Bbi elite force came out with, its limited edition of the Blackhawk, the hornet, the falcon, the phantom, and the me-109. Why not the apache. The only helicopter that I’m missing. Can u answer me that.
They only brought out the blackhawk Nightraid, f18 hornet Sidewinder, f16 falcon Endurance, there was never a f4 Phantom in 1/18 released only 1/32 by BBI. As for why no Apache or littlebird, Kiowa or any of the other items, I guess Sunnyside toys didn't buy or have the rights to reproduce them as the original and best BBI went out of business back in 2002. The current BBI items are getting smaller and some are not true 1/18😭
One hundred on EBAY six years ago...today, more like $750.00. Which....is silly.
I love your videos but where did all your other videos go!?
Foxy The Pirate Fox, Hi,😆 HumanMechanism and i are in the process of uploading all BBI and 21st Century Toys plus other 1/18 related models so keep an eye out 👍
Nasha 1 Yay! I loved watching all of them because I have a couple 1:18 scale tanks! Keep up the good work!
Foxy The Pirate Fox Good to hear this hobby is still going strong. Thanks 👌
Where did you bought it
Patricio Alvarado Ebay
Thanks man