Building In NZXT's New BEAFY BOY Case
Vložit
- čas přidán 24. 01. 2023
- My AMD test system needs a new home.
Affiliate links to some products seen in the video:
-Pink Asus Nezuko-Chan Case: amzn.to/3DdcEW2
-Glass NZXT H9 Elite Case: amzn.to/3R6LeXe
-DeepCool LT720 AIO: amzn.to/3WvdAM8
-Corsair Dom Plats DDR5 Memory: amzn.to/3kGh8ho
-Gigabyte X670 AORUS Elite Motherboard : amzn.to/3H7zYW1
Get some AWESOME Dawid T-shirts, Mouse pads and more here: dawiddoesmerch.com
Help us buy weird computers and tech to make videos on by 'Joining' the channel on CZcams here: / @dawiddoestechstuff
Or you can support the channel on Patreon: / dawiddoestechstuff
Follow me on whichever Social media you don't hate
Discord: / discord
Twitch: / dawiddoestechstuff
Twitch bits on CZcams: / @dawiddoestwitchstuff1128 - Věda a technologie
I must say.... I love the "Remove screws before forcing SSD bracket open" label at 4:57. It's like the designers at NZXT were sitting at a table with this case in front of them and thought "Ok.... now how can we make sure that people don't pull on this and think "Hmm... must be stuck" and just try pulling harder?"
I will forever give NZXT props. I emailed them asking if I could buy a new board for my h510 as I had broken the top 2 usb ports. Totally my fault and I told them that. About 2 weeks later one came in the mail free of charge. It's a stupid little thing, but it really shows the companies character for me.
Actually that's a W for NZXT
i had one bought one of the aer rgb fans and it wobbled like a fat girl in heels for the first time, they sent out a new one no charge
I have a similar story. When I had a H510 as my personal case, the power button wouldn't work unless I pressed down pretty hard on it. I didn't do anything to cause this, and NZXT sent me a new Front Panel board at no cost.
Thats nice, almost makes up for them resisting fixing a fire hazard they shipped out to people eh?
Not.
i love the o11 dynamic, its nice you did a review on lian li's most popular model
I see what you did there 😉
I was thinking the same thing.
yeah it has pretty much the same layout and looks
yes.
@enriqueamaya3883 Let's agree to disagree...
this is truly one of the cases of all time
Lian li, phanteks copy.
100% one of the cases of all time
Truly one of if not the only comments of all time.
Love me sum 011 dynamic copies😍
It's a very nice case, especially if you have some RGB fans on the bottom as well.
The case looks like a fancy mansion :D
G'day Anna, so when is Neko moving in? 😺🥰
@enrique amaya balls
@enrique amaya One that I do regret is reading your comment
@enrique amaya balls
@@hman6159 balls
That's a badass case Dawid!!! Its really nice seeing your channel grow and companies sending you loads of cool stuff.
@enrique amaya nah man i'm cool following the LINODE cult
it took me 3 months to get this case because they sell out quckly
Love the videos man! Top tier tech content!
Having a "girth dilemma" seems rough. Don't have that problem, everything fits perfectly fine!
It's exciting when we get double Dawid from the reflection in the front panel, lovely stuff!
Very nice case. Really like the whole panel airflow for the right side panel. Also that radiator mounting seems just fine with all the ventilation. Even with a full population of ssds, I think it would exhaust it all out. Big win for NZXT.
Wow. Good lord that’s a good looking case/setup.
I Love the small “obstruction” plant, put on the work bench. Really triggers my OCD and anxiety hard, very funny! 😬😮😂
No one tell Dawid he spelled "beefy" wrong in the title
so fun to see the NZXT H9 E Light in action!
HahahH
That red devil orange lighting looks real sexy like with those blue colored fans. It gives me inspiration for my all Amd build.
This is the most Dawid has used the word rectum, we need a Dawid without context video immediately. With the tier of word choice this man has that would be absurdly amazing
I've been binging your videos the past couple days since I discovered you. Keep up the good work Dawid!
4:56 - Remove screws before forcing open - that's a fun sticker.
Was lucky enough to get one myself. It has a lot of room for activities and it is very forgiving on cable management
"a lot of room for activities" LMAO I'm going to steal that for everyday use
Awesome cases and poor rectom health go hand in hand lol awesome video like always 😁
Great video as always and that is a pretty sweet case
That whole-side dust-filter is a very cool idea :)
I like that a lot
This case is sick I always like the 011D but the one thing that bothered me was the paint strips on the glass making a border on the edge this is just glass to glass like a fish tank its awesome
Getting some serious Tron vibes with that case beautiful,👌
Top view was glorious especially with that graphics card's glowing logo.
The came out good gj👏🏽👏🏽👏🏽
I've seen you put graphics cards in dozens of systems. I wish you would do a "So you want to upgrade and install a better graphics card" that shows you how to choose a better card and how you install them. You seem to plug stuff in and it just works. I watch these videos because you are hilarious, not because I've ever tinkered inside my five year old computer, other than to take it to a guy to tinker with because it was getting hot.
I have a really short case as well (meshify C). I have my AIO mounted in the top but still had to mount the front fans on the outside to make my 3080ti fit. The frontpanel mesh bows out a bit but it works.
I was very close to having the same case size vs GPU size issue when I built my current PC. Thankfully I got everything to fit in there, even though the GPU is right up against the front radiator (which barely fit inside the case itself).
do you think you could mount more fans on the ssd plate, for double fan action
leaving the top clear will definitely help the shots
I had to get a Corsair 4000D airflow case after I bought a MSI 4080. The 4080 "fit" in my old case, sort of. I had to remove the CPU cooler and memory in order to get it in sideways before slotting it onto the motherboard, and even then it was pressing against the front inside part of the case. I really had to muscle it in there. In the Corsair I've got plenty of room now and it's awesome.
@enrique amaya Non consensually I can tell you that.
@enrique amaya Last time I followed him, he took me down some dark back alley and we got into a stomp with the Beef Town Boys, cuz they're always out stomping. Then he stole my wallet and said something about his dad being good for the money. Do not recommend.
you should take a look at the Gamemax Master M905 it came out last year, its a $100 massive case that has storage for up to 8 3.5in hdds while all other cases now have space for like 2. i just ordered one last week and im waiting for it to build a workstation out of it. since its a case that came out in the last few years it has all the quality of life features like easily removable dust filters, and a windowed side panel, psu cover, and a built in gpu support bracket.
but it brings back the things missing from all other cases on the market, 2 removable hdd cages, 3 5.25in bays. i have high hopes for this not very well known pc case.
i JUST BROUGHT THIS CASE AND STARTING TO BUILD IN IT RIGHT NOW AS i WATCH YOU BUILD IN THIS CASE
nice looking case. but i would rather have a solid panel on top. but what aio cooler is that?
Amazing looking case that
I have a question Dawid. Is there at least one mount for a 3.5 inch hdd in the case? I need one for my 4tb junk drive.
Nice case! I just looked on Nzxt's site and they are sold out.
that deepcool AIO though... looks really cool
NZXT products have such a clean aesthetic
I love that build. The blue cables look great too. What would you say is the weight of the PC?
I REALLY like that case.... heck I REALLY like that WHOLE COMPUTER!!! (ESPECIALLY that AIO... you're the ONLY person I have seen using it and it confuses me because I think it is BEAUTIFUL!.... maybe the performance isn't all that great compared to others... but it seems to be doing just fine for my liking :D)
I think it's the Lt720, which is actually one of the best performing ones you can get.
Is the lancool mesh 3 better than the be quiet 500dx for temperature?
Nezuko is awesome :3 And i have same cpu cooler... fantastic performance and visuals
That case looks gorgeous
Sir if we are mounting radiator at the side do we need to use the stand that was there at side which were holding the default fans?
Hey, how are you able to monitor the temps of the CPU through RivaTuner? Last thing I have heared is that 7000 series is not supported yet. I at least dont get any readout with my 7700X :(
Quite the network closet you got there
Winning, it would be interesting to see how many fans you could fit in a system to keep temps as low as possible!
Rectum.... damn near killed him. Good tidy build. 👍👍
Very nice case indeed; I think if you go for the optional warranty extension you get free rectum insurance with three sphincter replacements annually - so you're good!
Interesting fan setup. 6 fans in front and behind the radiator to force air in, and just one fan to take the air out. Will this give enough cooling and airflow? I know you've addressed the CPU and GPU temps. I'm asking because it's my first time seeing fans arranged like this in this case
"Some flimsy ass justification" the sound of your voice in that sentence got me hahah 🤣🤣
I have the O11 Dynamic Evo and my cable management is garbage and my efforts to rectify it seem to always be in vain. I have been thinking about getting the braided cables and drop the standard ribbon modular cables, you made yours look so nice.
Did you drop a bunch of weight, or just a different hair cut, something seemed different.
They usually say don't have the AIO radiator higher than the block, but that hasn't seemed to affect your thermals. I guess it's only a problem as the AIO ages and sufficient air makes its way into the radiator.
What cables were you using? I have an rm1000x & the Asia horse cables I bought didn't work. I'm looking to upgrade my cables, & would love any input. Great video as always!
they're Corsair cables
hi is the cable cover to the left of the rgb fans removable?
Can you help me a bit? I have the same gpu and what's this 4-1 argb cable that came with it for? No idea, works perfectly fine with it disconnected
A rhing of beauty!🔥💪🏽❤️
Nice case
Can't wait to do a whiteout build using this case.
I am impressed with thermals considering the lack of fans.
Just buy the lian li o11 dynamic, its just better
I can't believe you chipped us off another VID so soon!!! AWESOME!
oh, sweet! The NZXT "prolapsed rectum" line of PC cases!!! that is "bad ass" if you get my meaning...
Thats hot. Love the ram.
15 Degrees Celsius in the room? Now here I thought we in EU were the only ones suppose to have a heating crisis during this winter.
Won't your AIO placement inhibit installation of possible future GPUs when they inevitably double in length?
7:54 bro the guy speed hacking had me crying 😂
I bet you could get significantly lower GPU temps by putting some fans on the bottom of the case.
Overall, it does look like a pretty decent O11 competitor.
For a real good time with the rectum review some old e-atx 14 slot cases. :)
Hello Dawid, i hope that next random tech comes out soon
my main problem with the dual chamber case.... the chonkiness of it. back breaking when the O11D's my primary unit before 😂
Why does it even have top fan mounts? Does it come with a swappable mesh top or am I missing something?
Rectum Insurance would be a good Nu Metal band name.
i have so to see the same pc haha, working great
Sick case, but what does NZXT have against top ventilation 🥴
I think they have it in the h9 flow
I use a corsair 750 watts psu and its holding up quite well and run FFXIV 24/7 on the system with no issues.
That RM750X is a great power supply, got it paired with an i5 13600k and a 4080, it doesn't even max out then.. Plus an RMX psu wouldn't blow up it's one of the best made out there.
I recently changed to an RX6800 from my 2070Super and ran into the same issues , the new card is about 13 inches long and wouldnt fit my old Cooler Master case. So I changed it to a Rosewill S500 tempered glass one (impressive case by the way) and took my old card and case and built a backup in the Cooler Master one. The new configuration turned out all AMD and the old one turned out all Intel/Nvidia LOL . I replaced the fans in the new case as they come with non speed adjustable fans, maybe you could do a video on how to fix the issue?
rly its not that huge for a tripple fan card in compare to after markets ones, i own a rx 6800 reference amd myself in a cooler master case master maker 5 and its abit shorther and a whole slot thinner then my old r9 390 powercolor custom but way cooler and quieter.. anyways im slapping a waterblock this week on it because for lolz, i hope i dont regred it :D
@@Xenoray1 isn't water-cooling only worth it for highest tier GPUs?
@Dawid Does Tech Stuff what purpose does the plant (in the coffee cup) serve in this scene? It seems really out of place. 4:16 I mean hell, you are having to reach around the plant just to be able to work on the case!
Did you install the power supply upside down?
Rectum? Damn near killed em!
where do you get all that background music from dawid??
Are you just blowing the hot air from the radiator back into the case? I thought those 3 pre-installed case fans were intake fans.
Well, that new home can be mine :)
A computer build on a tech channel
wow
Across the field of new ideas you stride like a colossus
A fun colossus though, not a normal one.
I put a rig together in December, originally going with a 680x, thinking it would have space for a 150i elite capellix rad and an Asus TUF 3080...nope. So, I said "screw it", and picked up a 7000x. Now That is a beefy boy. A little TOO beefy. It dwarfs my entire setup, I initially thought was beefy on its own. It was immediately out-beef'd(?). Like, the total setup with the case weighs 72 lbs. So, yeah...
does the corsair hx1200 psu fit in this case?
I love the esthetic of the Powercolor Red Devil 6700XT and I'm only slightly biased because i have one
If this had the option for a mesh top it could be brilliant
It does
@@fmt_piggy where the glass top panel is, not just a tiny thing off to the side.
@@Scarlet_Soul … It does. It’s the H9 Flow. Still haven’t seen much at all comparison in airflow and temps between the two though.
Bonus with this case is glass only melts so don't have to worry as much if the case spontaneously combusts
Rectum ? Damn near killed Em!
Your ambient temperatures are super cold, dude.. and I'm from Canada!
Opens youtube, what do you do first "kom ek binge-watch n huis vol Dawid videos" 🤣
This case or o11 dynamic evo?
so nobody is gonna talk about the dude speedhacking in battlefield
That's a sic build. I hope your rectum is doing well!
It's so Beefy Dawid had to make up a new word to combine Bear and Beefy to describe it.
Ill be honest im quite disappointed you didnt mount the rad up the top because im curious about how much it would affect temps having a glass pane directly over the rad
Whoa we have grandiose visitor today, the Sultan of Brunei himself
I choose to take the "floating around" statement literally. Youuu magical bastid Dawid!
Have you seen the new Phanteks NV7 and Eclipse G300A cases?
Ahh yes, the H9 E Light!