TAS801 so happy I found this video I was putting a cqb spring in my combat machine and my bushing fell out and there were zero videos and I have been searching for months until now!
great video! How on earth do you get the trigger with spring to sit in the casing and not keep jumping out?!? It just keeps springing back out once seated and with quite some force! Having trouble getting casing back together because the trigger won't sit still.
Are you currently accepting aegs for upgrade? I have a krytac lvoa-c and the 3 upgrades I have had done are the complete barrel drop in kit from Umbrella as well as a gate titan. I also swapped motors to a lonex titan a1. I would like to upgrade all the compression parts and if you think its necessary, upgrade the gears from the stock 18-1 krytac hardened gears to perhaps seigetek or something rock solid. I really dont care about fps, or rof. I want a responsive trigger, extended range and accuracy as well as reliability. I wanted to go DMR but most milsim events do not accept any m4 platforms in that category. Otherwise I would set the titan to semi lock and have someone pin it from full auto.
Hi, i have a g&g gc16 replica. And the only upgrade is a prometheus barrel (363mm). His fps is now 338 and i will more fps is that only possible with a new spring? So yes wich spring need i to put there in for 350-355 fps. Thanks
That should work well. I like to use CRC de-greasing spray, it's obscenely expensive, but it makes everything squeaky clean. I recommend keeping it away from the o-rings, better safe than sorry.
I have a Cm16 and i’ve notice they come pretty loud and proper shimming gets rid of the high pitched noise the gears make. I don’t think they do the best job imo.
@@TAS801 thx ! I Will switch with à 85. And 6.03 barrel 🔥 good review. The only one i ve seen on CZcams bro. What do you think to the gc16 predator since you did this vidéo ?
If you have Touched this gun before I can guarantee the issue was caused by you You Should not Anywhere near any kind of engineering project whatsoever
Awesome. 👌🏼 Learning to tech, great help Ajax.
I learned a lot more than I expected. Thanks!
these videos have great tips from a great tech
Thank's for taking the time to do this :) really helpful mate cheers
1234 5678 cheers
very useful! Thank you very much
be patient, video is rotating! itll take a few hours!
okay, whew!
TAS801 so happy I found this video I was putting a cqb spring in my combat machine and my bushing fell out and there were zero videos and I have been searching for months until now!
Sweet!! I just got a classic army m4 km10 can i do the same upgrades?
Plus I have issues with my selector switch sometime it changes sometimes it dosnt
great video! How on earth do you get the trigger with spring to sit in the casing and not keep jumping out?!? It just keeps springing back out once seated and with quite some force! Having trouble getting casing back together because the trigger won't sit still.
Ciaran Anything great question. I'll see if Ajax can reply .
2 years. Still no reply XD. If trigger does that just hold it in place lol it will work
Are you currently accepting aegs for upgrade? I have a krytac lvoa-c and the 3 upgrades I have had done are the complete barrel drop in kit from Umbrella as well as a gate titan. I also swapped motors to a lonex titan a1. I would like to upgrade all the compression parts and if you think its necessary, upgrade the gears from the stock 18-1 krytac hardened gears to perhaps seigetek or something rock solid. I really dont care about fps, or rof. I want a responsive trigger, extended range and accuracy as well as reliability. I wanted to go DMR but most milsim events do not accept any m4 platforms in that category. Otherwise I would set the titan to semi lock and have someone pin it from full auto.
Spur to sector to bevel ???? And you never even installed grip and motor ??? . Are you just hoping it works ?
What custom buffer tube do you use for your custom builds? Thanks
Are all M4's the same inside? I have a crappy basic entry gun and I am looking at upgrading it, but can't find any videos on my specific gun.
Where do you get the shims for gear spacing? Do they come with new gears?
Got a question I've just bought my first lancar Lt-25b gen 2 m4 and want to increase grouping and get rid of all the noise from it
Shim it. Get a new motor. Get a good hopup. Check air seal. Tune the hop-up.
do i understand this right that if i wanna upgrade the spring in my tr16 308mbr i can use this video as a guide or is my 308 different?
Can you do a quick spring change on this gun
no
Hi, i have a g&g gc16 replica. And the only upgrade is a prometheus barrel (363mm). His fps is now 338 and i will more fps is that only possible with a new spring? So yes wich spring need i to put there in for 350-355 fps. Thanks
its trial and error, just try out a spring with 10-20m/s more
Can I use brake cleaner for the inside of my gearbox shell to get all the crap out??
That should work well. I like to use CRC de-greasing spray, it's obscenely expensive, but it makes everything squeaky clean. I recommend keeping it away from the o-rings, better safe than sorry.
Hi how can I order a rifle from you thanks
Do factory G&G's come shimmed correctly?
I have a Cm16 and i’ve notice they come pretty loud and proper shimming gets rid of the high pitched noise the gears make. I don’t think they do the best job imo.
Would like to send my cm16 raider 2.0 L to you for an upgrade. Let me know how and if it's possible.
Drey Muckey learn to do it yourself my dude
hello, wich spring in the gc 16 predator intermediate please? M100? m110? m85?
M90
@@TAS801 thx ! I Will switch with à 85. And 6.03 barrel 🔥 good review. The only one i ve seen on CZcams bro. What do you think to the gc16 predator since you did this vidéo ?
If you are trying to achieve 300-350fps .20 gram bb then you can use an m90.. Ajax made the Video, this is Rad replying.
@@TAS801 yes.. I m 280 fps like origin. And i Will use. 25 or. 28 bbs
@@PacoHan sounds good!
Do you have a website to order the parts you build great video
Jason Fick we just sell our parts in the store
TAS801 ok so how could I order something from you.
If you have Touched this gun before I can guarantee the issue was caused by you You Should not Anywhere near any kind of engineering project whatsoever
why?
Lol... Ok so most of the work is done off screen...
Марти украл твоё видео