Through 4:05-4:45, I have trouble on this steps. I’ve used the little screws. However, I find that it’s not secure at all. It’s very loose to the point where some of the screws have fell out. Is there any tips that you can share with me to help me out? Btw, nice video. The close ups are very helpful!
@@jessereed2383 I managed to put up my bed so problem solved for me. It's been a month and I haven't had any problems with the bed. What I did was I soaked the screws and holes with WD-40 and that did the trick for me!
If you look at the drawers you can see they're not really attached to the bedframe, they're on weels. The other side of the bed isn't 'closed' or anything, so you can literally pick up the drawers and roll them under the other side :) Edit: I'm illiterate 🤷🏽♀️
Does it come with all the resources like bed equipment except mattress and does it come with at least like a wrench ? Ik it doesn't come with screw drives but does it at least come with a wrench ?
Do you know if the storage boxes are optional? The one I wanted was the one without but it’s sold out and I’m wondering if I can buy the one with storage boxes but not install.
I have this problem where after a while of having this bed it's starting to make this squeaking sound where the headboard is attached to the rest of the bed frame(right in the middle) and it's loud. Any solutions?
You have to lift the mattress and tighten the little screws on the cross metallic bars. Sorry I don't remember the exact name of the pieces but I did this and it fixed the issue. You might have to do it once or twice per year.
I don't fucking understand this part at 1:20. How tf did you just in one slide, fit it in, my poke out, and at 1:25 i am just twisting and turning this damn square thing and nothing is happening
This video is such a great help! Thanks
Glad it was helpful!
Thank you very much for the video helped me a lot ❤
Thank you so much🙏🏽
Very helpful video!
What kind of comforter is that?
I’m planning on getting this bed frame. Will my 48in mattress fit the 120x200 bed frame?
With the double will four of these draws fit at one time?
What is the thickness of your mattress?
What slats are these? Lonset or luroy?
Where’d u get the bed comforter
Is this the double one or single ?
Does it only come with 2 drawers like how you showed on the video..or 4 drawers in total?? (with 2 more drawers for the other side)
you can by it with no drawer, with 2 or 4 , it is up to you
it does not come with the drawers , you have to make an extra purchase of the 2 or 4 drawers
can you have a drawer on the left and one on the right?
is it sturdy on a hardwood floor? does the frame grip to hardwood floor pretty well? or would you recommend i put pads on the bottom for better grip?
there is no need to put pads on the bottom for better grip
Through 4:05-4:45, I have trouble on this steps. I’ve used the little screws. However, I find that it’s not secure at all. It’s very loose to the point where some of the screws have fell out. Is there any tips that you can share with me to help me out?
Btw, nice video. The close ups are very helpful!
Same issue
@@jessereed2383 I managed to put up my bed so problem solved for me. It's been a month and I haven't had any problems with the bed. What I did was I soaked the screws and holes with WD-40 and that did the trick for me!
I first used a screwdriver but then I realized I needed a driller to make it go in
You have to use a drill or it won’t go
Having the same issue…the little screws aren’t fitting in the sliding rails
my room is small and i’m getting the same bed, but just a twin size, i have to ask, do the slats come with the bed? or do they come separately
it comes with the bed
@@DoitDoit I’m planning on getting this bed and I’m wondering if the middle support beam comes with the bed or do I have to buy that separately?
it comes with he bed
@@DoitDoit ok thank you!
So drawers are not connected to the bed frame. It just rolls on the ground in and out as i don't see side rollers connected drawers
Do you know if the storage boxes are interchangeable and can go on the left side of the bed?
I have the same question
Yes they can go on either side
@Canadian wafflz YT why not? was there an issue with the bed?
yes
You can place them on either side.
i just need ghe floor haha
if the drawers already went on one side can you take it out and switch it to another side ?
Yes
yes
can you do it by hand with screwdriver or do you need a drill
you can do it by hand
What size is that one?
what covers and protectors did you get for your bed?
yeah, can you say it please and wich mattress.
Does it squeak ?
Can the drawers go on the other side/left side?
If you look at the drawers you can see they're not really attached to the bedframe, they're on weels. The other side of the bed isn't 'closed' or anything, so you can literally pick up the drawers and roll them under the other side :)
Edit: I'm illiterate 🤷🏽♀️
yes
I’m planning on getting this bed and I’m wondering if the middle support beam comes with the bed or do I have to buy that separately?
The center bean is sold separately
Sometimes is included when you buy the entire bed combination.
Just check
@@YuniorGamboa is it necessary to have the center beam? Will the bed eventually fall apart or will it be fine without it
I guess my only question is, can you put it on the low bed and still have the drawers? Instead of high?
yes you can still put it on the low part and have the drawers
@@DoitDoit can the drawers go on either side of the bed ? Like left or right side ?
@@pattyalvarado407 yes
@@DoitDoit what is the width of the bed?
Does it come with all the resources like bed equipment except mattress and does it come with at least like a wrench ? Ik it doesn't come with screw drives but does it at least come with a wrench ?
Why tf would it come with a wrench??
It does I have it and I’m trying to assemble it lol
How thick is your mattress? I want mine placed high but idk what thickness i should aim for. Would 10 inches be okay?
i buy the pocket madrass then i buy a bedmadrass to make it more comfy and u also get up a little bit more, sure a bit more expensive but so worth it
Are the drawers like on a rail or do u just shove em under the bed cause it looks like there was no rail for it
exactly as you see in the video. no rail
Do you know if the storage boxes are optional? The one I wanted was the one without but it’s sold out and I’m wondering if I can buy the one with storage boxes but not install.
Yes , the storage boxes are optional
@@DoitDoit omg you’re the best! so even if I buy the bed with the storage, I can opt to not use them?
How many inches is your mattress???
Another question sorry but do you put a box spring on top of this then a mattress? Or just the mattress?
just the mattress
Does the bed come with the tools you need for the bolts?
yes, it comes with allen keys
How big was the box it came in? do you have a picture? would it fit in compact suv?
Dimensions are on the ikea website...
Ours fit in a 2001 Ford Taurus
@@kaymone143 what size bed?
@@cheyb545 I got queen sized
@@kaymone143 oh wow, i was worried it wouldn’t fit in my chevy equinox, thank you!
What kind of woods are made ikea beds?
pressed wood
Whats the bed frame size
How many boxes does it come in. Weird question but i need to pick it up and want to know if i have enough room lol
is it possible that I could put my own mattress foundation instead of using the slats?
I believe so, as long as its the right size
About how long did this take you to put together?
one hour
What side is the drawers on
Either
you should write down what tools are needed to assemble the bed....
where the assembly for the drawers? Did i miss something ?
Is the headboard optional? Also can the drawers be on any side u want?
yes to both questions
@@DoitDoit thankyou!
What’s the size of this bed plz? And what mattress can fit?
@Canadian wafflz YT why not?
Go on the IKEA website, all the measurements are there
reading is free, it's literally in the title
It’s a full mattress
Is it black or brown? More black or more brown?
I would say more black
I have this problem where after a while of having this bed it's starting to make this squeaking sound where the headboard is attached to the rest of the bed frame(right in the middle) and it's loud.
Any solutions?
You have to lift the mattress and tighten the little screws on the cross metallic bars. Sorry I don't remember the exact name of the pieces but I did this and it fixed the issue. You might have to do it once or twice per year.
Please help - is it black??? ‘Black-brown’ is putting me off ordering it, as it’s to match other black wood furniture.
black brown
what are the measurements for this bed?
It’s a full/ queen so it should be about the measure of a queen sized bed idk if that helps
Hi can you do this on your own or do you need the help of someone?
yes you can is not heavy
Is it sturdy?
yes
What is the song?
i hate beds with slates, they break over time
the color says black-brown. Is is black or brown lmao? I don’t want it to
look funny next to my other black furniture
Dark brown
my small metal rod keeps snapping i hate this bed frame fkkk
I’ll Take it
I don't fucking understand this part at 1:20. How tf did you just in one slide, fit it in, my poke out, and at 1:25 i am just twisting and turning this damn square thing and nothing is happening
I’m having the same issue, I can’t get them flush against one another
@@Socksxmania39 aaaahh i have the same issue now, hoping someone had the solution!!😂 did you manage to do it? Tell me how plssss
Clicked off as soon as I heard that annoying unnecessary music ... much better videos with commentary...
based on your comment here, it means you did not click off right away, but took the time to write your comment
Fair enough..... lol
if the drawers already went on one side can you take it out and switch it to another side ?
THIS QUESTION!!!
Yes just bought it you can switch to either side doesn’t matter both bottoms are open
@@alanvlobos omg thank u so much!! i hope u enjoy the bed :)
@@alanvlobos thank you
@@dhanners3143 np