Neat n clean content as always., i own fz 25 n feels confident to maintain it by myself because of you. Thank you
sir iss tappet jo apne define kea he vo lajvab he ek detail me knowledge bahut shi di bahut badea sir
Aapke videos ne bahut help ki hai fz25 ko maintain karne me. Thanks a lot for all your helpful fz25 videos.
Nice gurpal... Good to see that u r utilising ur time during this pandemic situation
Very informative.. Keep up🔥
Your hardwork will pay off 🙏🏻
Very informative Pal. Keep posting good work. 👌👍☺
Great bhai. Easy understanding
Good work and excellent explanation.
Very good video Gurpal, that's a very good thing to improve on your previous video which we teach in management schools double thumbs up for your video keep doing the good work.
Bro just superb 👌
Very informative!
You best mechanical man .super
Best video ever
Simple but great
Ek No. Video
Yamaha service centers are very bad in their service, watching your videos gives us all the information, l also own a FZ25 thanks to your videos it's kept in good condition.
When I adjusted to this spec (intake .07 exchaust .10) I had lots of handlebar vibrations at high rpm (above 4k) eventhough the performance is good
What an awesome video!! Even words fall short to thank you.You really are a true saviour of the fz25 community.👌
Bhai, I just tried adjusting the tappets..But I was unable to adjust the outlet one.. Accessibility was very much restricted. I was having problem in putting the feeler gauge let alone adjust the tappets.Did u also face that issue? Do u recommend any other way to do that?
Good explainer..
Can explain more about TDC and crank ...what is the need to adjust them?
Bohot badiya
Superb 👏 👏
Very Nice sir
Sir ,Inlet 0.07mm & outlet 0.10 mm
Kya ye setting fzs v3 bs6 ke liye bhi same hoga ?
High setting se keya hoga sir pls.
Why yamha bike always tappet sound when its set to yamaha recommend clearance pls reply
At TDC, tappet were not Loose.
First time opened tappet cover since I bought bike.
And how you set up exhaust side tappets. There isn't any space.
Please reply. Need to set tappets but tappets were not loose.
I mentioned in the video. It can be BDC bottom dead. Roatate once again full 360 then check if they are loose. Yes gap is less you have to work anyway
perfect
Sir Yamaha seuto 125cc ka valve clearance btaye pls sir
Bro....My FZS25 250 cc by bike , After tappet adjusting some burning fog observed on exhaust when bike is on. I am setting intake 0.07 & outlet in 0.10 ...What is the reason.. please reply
Thanks g
I’m facing this issue on my fz25,2017. But I’m afraid to do this myself. When I went to three different workshops and service center, they said this sound is normal. 😞
All biker CZcamsrs : nothing to do stay home stay safe .
Life of pal : Yamaha fz 25 😁😁😁 ki postmartum
Yamaha fz 25 : uttahle bhagvan mereko uppar uttahle Baba
Cone set par video lab ayga
Nice
Great video. Much more in depth than the previous one.
My bike is still having the same problem. Clearances get tightened in just 700-1000kms. After trying many times, finally decided to give it to my mechanic friend. He replaced the tensioner, basically removed and put back the timing chain and adjusted the clearances. The bike was much better, but still not the same as other FZs.
Unfortunately due to the pandemic, he had to shut and I couldn't collect my bike and test. Hopefully this issue is fixed, just waiting for the lockdown to end.
You also reported in xbhp right ?
I was researching because i wanted to buy one.then I saw your video about the noise.
A lot have complained the same.
Please suggest me more about this.
Is it livable or should i go for another options ?
@@pratiktandel5706 Hi, my bike has a different problem with the valves. I have uploaded a clip on CZcams comparing the sound of a normal FZ25 - czcams.com/video/ohsdv7vBBlg/video.html.
The whole thing with the tappet and coin rattling is exaggerated by most people. People expect something silent like a Honda in this bike, which isn't the case.
@@ShashankKR bro i saw your CZcams video.yes its a bit abnormal.
Bdw i decided to buy the bike untill this tappet n coin noises issues filled my mind.
How was your experience when u bought the bike ? Did you took proper care of drove it rash ?
How are your friends fz25s performing ? Are they having the same issues(unlike yours) ?
Any advice you want to give me ?
@@pratiktandel5706 I maintained it well, until the service centre adjusted my tappets during a service. After that, the bike started to become quite bad.
I have ridden 10-15 FZ25s. None of them have the sound like mine. Most of them have minimal sound, are very smooth and accelerate very well unlike mine.
Just one advice. Never allow the service centre to touch the tappets. In fact, don't bother about tappets at least for 10000kms.
In the initial 4000-5000kms there may be a lot of noise (don't worry about the noise, just keep riding), but once the engine is set (may take around 7000kms), the sound will be minimal.
Also, change yamalube every 2500kms. Gurpal has explained about the oil very well in a video, I suggest you watch that as well.
@@ShashankKR i am asking such questions because the prices have gone high up.i have to think before buying.
Thanks for sharing valuable information.
Do you think its an ideal bike for 60:40 city:touring usage ? Or u have other suggestions for that matter.
Bro, can we change Instrument Cluster with r15 or Mt15 ? any idea bro regarding this.
You will need a r15 or mt15 for few days to check how the cluster is wired and check the orientation. Also need the wiring diagram. Once few whole days are spent on rnd then see if its possible to fit. Then use new connectors which would direct fit the stock wiring harness of fz25. Also figure out how to then bolt the cluster to fz25 using clamp or something. So for this a bike is needed, wiring diagram and an additional cluster which would come with order.
When you put the screwdriver in to check tdc. How do u know? What is supposed to happen. How to know if it's in tdc and how to tell if it's not (other than the loose tappets method)
Loose tappet method is the perfect one. I put screwdriver to check if piston is at top but this is not reliable as you may touch the open valve and it will feel like piston at top. Another method is to open right side timing chain cover, there will mark given on the sprocket and engine cover, match those and piston is at top.
There's coin rattling sound in my vehicle but the service center guy is saying that the sound is common.. am very confused now. pls help
Set this setting in my Fzs V3 bs4. Inlet 0.7mm, outlet 0.10 mm , but my bike pickup is lost
Bro fz ki kuch or hai clearance inlet ko 1 pe kro and outlet ko 13 pe fir ayega mast pickup
cool
I have kept that downloaded in youtube
Please help. I got tappet adjusted in this manner in service center but I'm getting coin rattling sound. Previously I was getting a different sound, so went to adjust tappet. What to do?
I don't know what they did, how they did it. If you think sound will not come thats not the case. Tappet adjustment is not a solution for sound, it is for performance only. If you think there is a issue get it adjusted outside.
What are the 3 marks on the magnet wheel? Are you sure we need match with the 3 rd mark ?
Can u please upload regular bike serive maintanance of every 5000 kms
Do a service when its required. Wherever the attention is required fix it. Dont wait for 5000 or 10000. That's is company method not applicable for individuals
Great work,but I can't do it for ever...poor my fz25
Hello Gurpal. Thanks for the very informative video. I am looking for immediate advice from you on the FZ 25 2019 engine noise which I feel very abnormal after using the vehicle for almost 2 years. My vehicle has run 15000 km. I got the vehicle checked at Yamaha authorized service and they say it is normal as they checked at idle condition. This abnormality is after 70 kmph speed.
It will be there. It is just the way it is with every fz25
czcams.com/video/W5LPE1Ywj08/video.html
Thank for the info..great video..
My fz 25 exhaust pipe looks like very rusty..but yours looking better..is any way to clean this rust in exhaust pipe?
Tyre pressure kitna rehna chahiye for better performance in fz25
Hello sir !
I have Yamaha FZV3 BS6 2023 model bike runned only 4000kms, now I am getting the tick tick sound when bike is in less RPM what to do need to do tappet adjustment ?
Bro, I have doubt, both inlet and outlet adjustment set at the TDC position only
@@LifeofPal how many km once we adjust it? Sry for too much questions. Because my fz is new one, only driven upto 2k kms. Actually I am character being of "I wish to know about my bike fully".
I have more doubts on fog fixing wiring.
I also saw your video too. if you don't mind can you give your contact.
Hi there,
I have bought a new FZS 25 , almost 1100km , milage 42.4 , giving a hisssinggg sound. My local mechanic suggest to adjust engine rocker tapper. What is your opinion. Please guide me. Thanks😊
❤❤❤❤❤
Hi, Please make video on how to check engin oil level using dip stick.
Please let us know how much a dip stick will read for 1450 ml of oil.
Sir what is the clearance value for Aprilia sr 150 scotter ,plz do let us know ,no one knows i hve tappet prblm #gurupalsingh🙏💝
Mere bike ka tappet sound sirf Morning me aata hai first Start me thodi der k baad tappet ka aawaj nai aata hai
UM commando me tappet clearence kitna rakhna hai bhai ? detail kisi ki paas nahi...
@@LifeofPal bhai service center aur show room india me bacha hi kaha hai ?
isiliye to aapko puchha...sayad pata ho aapko. service center pe jo kaam karte the wo ab khud ghar se kaam karte hai par luchche log batate nahi hai.
I own fz 25
👍
U deserve to be subscribed..... Which I did.
Hii bro..
After adjusting the tappet clearance the engine vibration decreased and responsiveness increased. But there is a problem!! The ideal speed varies like 500 RPM range even on the move !!
So the engine cut off automatically in lower RPM, i can't adjust it with ideal speed adjusting screw which is located in the throatle cable holder. Any solutions ?
You need to adjust the idle screw on the throttle body not on the throttle cable. Adjust that. Mine fluctuate too now and then. I think its normal. It gets out of adjustment very often.
Very good.. Explained every thing.
already done this on my FZ150 V3...
But not agree with keep more gap than recommended.
Thanks
The gap is within the recommended range. Remember its a range not a fixed parameter.
What is best setting for no nosie ?
@@LifeofPal no bro I'm asking seriously i don't want that kit kit noise. 🥲
Is this problem in every fzs 250 if yes then I am cancelling to buy this bike
No it's not with every bike. Fz 25 is a no nonsense 250cc commuter with understated handsome looks. I got it in 2019. Have zero regrets. If u dont like it, maybe try those bajaj 250cc bikes recently launched
@@afraza5946 I searched lot on CZcams all are saying heating issue, engine issue I am confused who is correct.i like bike look.please provide your review on FZS 25 it will helpfull for me
@@sudhirjoshi3115 I would still say buy it eyes closed. No issues in my bike after 2+ yrs. Heating will go away after first service. The engine is a simple no nonsense machine that gives excellent city riding experience. Go for it eyes closed
Yes it's in all fz25, Fz25 is the least quality bike from Yamaha, assembled the scraps together and named it as Fz25
bro i need valve oil seal and tappet nut in nepal here in nepal i caN'T FINd it n my bike is sitting for 5 month in garrage
can u help
hi bro mere pass bhi Fz 250 hai Uska Bhi typhoid ka hai vah ja raha hai
Main Ek Bar service centre Mein pet kiya tha lekin aur successful Nahin Raha to aap mujhe kuchh madad kar sakte hain please reply ?
aap mujhe number send kar sakte hain Taki mein call kar sakta hun ? Pllz
My same bike is heating too much which valve may cause this I had adjusted value 3000 kms before and now it is sounding tapet and low pickup & after heat it is not pooling bike on 1500 rpm
Readjust the tappets there must be some mistake
czcams.com/video/W5LPE1Ywj08/video.html
It it mandatory for adjusting tappet
@@LifeofPal I m asking bcoz I didn't do it with my YAMAHA SZ-R WHICH I BOUGHT In 2012... Is running in perfect condition
ASC set exhaust valve to zero gap, Twice…!
$
Bhai i use 1 rupee coin to open these two crank plastic covers
Areh bhai sound atleast sunadeta... clicking sound solve hua ki nahi
@@LifeofPal bhai clicking sound ka issue k baree me kuch solution batado bhai
new improved ? you missed the main precaution this time as well. tappet adjustment MUST be done in cold engine(best left overnight). plus the engine oil grade 15w50 or 10w50 is recommended by motul for fz250. i use 7100 10w50 myself and u will notice reduced tappet noise instantly. i hope you mention these points as well. 👌
Mary bike may 2nd time Loos ho gai 😭😭😩
Yamaha should replace the present FZ 25 rockers arms with the roller bearing rocker arms 😭 waste of money FZ 25 ,4 years saving wasted various idiot noises from engine
I shifted from R15 to fz25......R15 engine is pretty much awesome when revving..but downside you had to revv it to be fast.....
Fz25 in the other hand doesn't need to be revved hard ...you feel good punch after 4k rpm.
I rode back to back fz25 and dominor and ktm 390....... you can't compare these with R15 smoothness....so don't expect smoothness ..!!
@@pulkitrock ARE YOU DUMB THATS WHAT IM TELLING IN MY COMMENT THAT YAMAHA SHOULD REPLACE CURRENT ROCKER ARMS WITH BEARING ROCKER ARMS PRESENT IN FZ 150 CC AND R15 MODEL , HEY HAVE YOU SEEN R15 AND FZ 25 ROCKER ARMS , BEARING ROCKERS ARMS GIVES A SMOOTHNESS TO ENGINE.
Yes my friend they needed to.do it but they didnt.arms with roller should work smoothly than this flat type one.
Bhai, mera bike ka servicing plz kar doge❓❓Mera bike bahut jayda kharaab ho gaya hai!!
Mere paas bhi Fz25 hai.
Plz bro.
Just give ur mobile no.
Hello my people. Now this is more detail oriented and improved version of before. I know tappet adjustment is complicated and risky and therefore require complete learning to reduce the risk. This will help for sure. Let me know what you think. All the best.
Mene meri fz 25 me notice kiya 5th gear me 87 pe halkasa taping noice start hota he kya is se damage hoga ya jaldi adjust karna padega???
@@nisargpatel2575 aisa kuch nai hai
Fz25 ka oil pump khrab ho gya, kya kre kahe mil v nhe raha, plz reply