Video není dostupné.
Omlouváme se.
Seacocks and stern gland
Vložit
- čas přidán 23. 08. 2019
- In this video I finished cleaning up and painting the engine bay, installing new through hull fittings and seacocks then pack the stern gland stuffing box.
If you are enjoying this channel, please consider making a donation to www.paypal.me/... or become a Patreon of Dangar Marine at / dangarmarine
T-shirts and other merchandise available at dangarmarine.c...
Common items used in these videos are available from my Amazon store at www.amazon.com...
Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store.
All music available at soundscloud.com...
Stu, ignore the A-holes. I think I speak for most of your viewers and we like everything you're doing. Great to have comments like the one on the packing that make that job so much easier.
Thanks mate. Yes, it's great getting tips of viewers. Lots of great experience has been shared by everyone which has been really helpful.
I've binge watched this series in less than a week during 'the event'.
Frankly it's got more drama and intrigue than Netflix.
So pleased to see the engine bay finished, but the shag pile wall coverings remind us that there is another season of drama in store with the cabin.
And presumably Eddie will need a dog house as well.
Keep going Stu - your style, manner and your if-in-doubt-power-tools approach to solving problems will keep me coming back for more.
If you make it to the UK (boat show or otherwise) I'd love to buy you a beer.
“For reasons of good taste”. Simple yet beautiful description of your reason for removing a piece of the old hot water system. If you have no objections, I think I’ll adopt it and use it as my own, completely free of charge of course.
The flavor of the channel is you. We enjoys watching what you do. It is not just about the boat.
Stu, people watch because of you and how you present your projects in an easy (real) way to follow along. You’re the type of guy that everyone would want as a neighbor. Just keeping making your videos and we will watch them.
Thanks Bill! :)
Working inside boats sucks, working on plumbing is worse, working on boat plumbing...F-that! Excellent work, good on you for continuing to tackle this massive project mostly single handed. It's going to be worth it in the end and a means for many adventures!
Thanks mate!
Respect young fella..... I am a Welshman living on the Sea of Japan.... It is a long story, but I thought after meeting a couple of Japanese friends one night,,,The wifes father had a boat and I said to my Mrs,,,,,Lady we should do that!! I saw the first couple of this projects videos,,,,and she said in typically Japanese fashion,,,,You can do many things Ian chan,,,,but you cant do that!! And No, never in a month of bloody Sundays!!! Incredible videos,,,really enjoyable!! My Mrs cannot fully understand your Aussie accent,,,but she gets by.... keep em coming young fella!! Thank you.
The fiiinaaaalll countdown!! Do do do dooo!
On a more serious note, dont change a thing stu! You do you! Congrats on making it watertight!
Thanks mate, it's certainly a sight for sore eyes.
"I'll always tell you guys ..." I don't care what you do ... you are going to find people that revile you for something (or everything) that you do. And then there are other people who will love what you do no matter what your choices are. I suggest you just ignore the people that are pissed at you and play to the people that applaud all that you do. I applaud your choices and very much enjoy AND appreciate the content of your videos. Thank you. VERY much!
Thanks mate!
I'm Angry that I don't live on Dangar Island and have a nice boat!🤪. Nah, I enjoy these videos a lot. You really are a good mechanic.
Hell yes, Stu. It must be super rewarding to be working in that painted compartment. Looks awesome. Always fancied a sailboat, but this thing has me thinking different. Love it.
It is nice to work in the engine bay now, well, as nice as it can be! ;)
That grey engine bay paint job looks GREAT!
I can't wait to see the old girl in the water! If I were to take on a project like that with my schedule and life, it would take me 5 years to get done what you've done so far. Great job Stu!
I'm looking forward to it too. Plenty more work to do on the mooring but I'm looking forward to a change of scene.
@@DangarMarine Yes, always something to do with a boat I'd bet. I also cannot wait to see that ROV in action when you get the boat running.
I'll be watching regardless of what your content is on youtube as long as you stay true to what you're saying! Great video as always.
Thanks mate! :)
@@DangarMarine So will.I Stu, you don't need to justify what you are broadcasting
and i will be too
Awesome progress to see, stoked to hear how close you are to launch Stu. I love the engine bay, it’s amazing how much nicer it feels putting a boat back together with lovely shiny paint all around and new parts being fitted properly. Really cool transformation on that room.
Thanks guys, it is nice to be in there now and now see rust and flaking paint everywhere. I'm glad I went with those fittings too. I would have been worried about using any dissimilar metals and keeping those old gate valves.
Another great video, you are truly dedicated to this mate. Well done. Can not wait to see the "Coopers" flow on launch day.
Thanks Russ!
Enjoy watching the progress!
Those valves, skin fitting and collars rock .... 👍
Regardless of the type of content you present your viewers, it is the presenter of the content that is most important and engaging. Continue being yourself and your channel will continue to flourish.
Thanks Christopher!
It's going to be a beautiful boat....I hope it serves him well for years!
Thanks Thomas. :)
Im here for the ride Stu. Cheers!
love your sense of humor! run into the cabin hold the spanner, then run around to the engine bay and turn the socket lmao
As long as you keep posting, I'll keep watching
Thanks Robert. :)
Good effort Stuart, looking forward to the launch
Thanks John. :)
Very excited to be apart of the process, almost like if it were my boat. It's a dream of mine to do this same thing. You know every inch of the boat,nothing you haven't touched, which gives you piece of mind and a lot of pride. If I lived near by I'd love to give you a hand.but I live in Atlanta Georgia, halfway around the world. Still, I think your doing great. Chad.
I think a big part of doing a boat like this is knowing every inch of it. It gives you confidence in it as well as making it easier to diagnose and repair down the track.
Stu, make yourself a couple tapered cone wood plugs the size of the through hull holes to have onboard in case you have a failure. A boat yours size should always have some wood plugs for leaks.
Yes...
Damn I was thinking the same thing but I don't know anything about boats.
I know it sounds weird, but on the wrecker we keep bars of soap to whittle down to the right size of any hole, I know water and soap goes together, but it is just temporary. Just a thought.
Soap is good for fuel leaks and you can wash you hands with it also. :-)
Fin you sound like a Damage Controlman...
I appreciate everything you film and show. Its good info even if your not a boater. Thank you from Wichita Ks. USA
Thanks John. :)
I'm sure the new adventures will be great. I'll be here.
Thanks Sean. :)
A helpful tip...I used to rebuild large commercial water pumps and when we replaced the packing we would coat it in anti-seize. It helps it go in and come out a lot easier.
I'll give that a go next time, thanks.
Stu, Couple of things...
1. I have discovered your channel while dreaming about sailing my own boat, but due to some recent spinal injuries, will probably never be able to do this. The star of the show is the most interesting part of your channel. How you view and adapt to issues is very much the key attraction, and so any video with you is worth the watch.
2. After watching you put the sikaflex on those seacocks, if you ever give up boating, you should consider becoming a pastry chef. Your technique is perfect. ;)
3. If you have extra space on the stuffing box, you can zip tie those nuts to one of the "bolts" That is where I would put mine.
Thanks mate, I might do a cake to celebrate the launch with some Sikaflex writing on it. ;)
towed sonar??? yes please all the details???? yes please... so looking forward to the future Stu
Will do David. Looking forward to experimenting with more of that type of gear at the project develops and I'll certainly be sharing the full experience, warts and all.
STU---SAFETY GEAR WHEN GRINDING---PROTECT YOUR EYES !!! Love the videos, be safe, can't wait to see the launch and engine start up👍
Still my favorite CZcams channel!
Thanks Dan. :)
I stumbled across your channel a couple years ago when I was researching older outboards for my jon boat. I love to wrench on cars and small engines etc. I dig your content and look forward to watching.
Thanks Zach. :)
Eager to see her in the water again, I look forward to your videos.
Looking good Stew! I think those through hull fitting and ball valves look like good quality stuff. Can’t wait to see it floating. I know that with 10 days to go time is tight but take your time with the electrics. Take lessons from Project Brupeg on wire ends. Solder and heat shrink your everything possible including your main battery starting cables.
Don’t forget that since you’re drawing raw water for cooling that you can plumb in a 3 way ball valve on your inlet be set up to draw water from your bilge during an emergency.
Yes, I'm very keen to do the electrics right. I'll probably end up with some form of temporary bilge pump to keep the hull safe while I'm in the US but I can push on properly once I get back.
Channel evolving? You will make it interesting, no worries, Stu. It is great that you are just a few days from being back in the water. On long projects like fixing your boat or me fixing a wreck of a house, the darkest hours are just before dawn. You have real momentum now.
Thanks Brian. Hope your house is coming along well!
Those are some pretty impressive looking plastic fittings. My earlier comments referred to what I always see, which is people going to the hardware store and using plastic fittings designed for the home. I've pulled quite a few of those off of boats I've worked on. I'm going to run these by the coast guard before my next project as it will be inspected and they have the last word on whether or not it passes. Great content as usual!!
Yes, the hardware store isn't the best place to get bits for a boat, particularly below the waterline!
That engine bay looks amazing. way to go man.
I greatly enjoy your videos. Started watching for help with outboard motors, but kept watching because you are fun to watch, plus great instruction. Hope you do some more outboard work from time to time, but I’ll keep watching! REALY looking forward to seeing the Detroit diesel go back together. Please spend all the time you want on that subject. From the Chesapeake bay, USA.
Thanks Jeff, I'm looking forward to working on the Detroit too. :)
I think I have watched every vedio you have posted. I will keep watching until you put up content that I just do not like. I watch because of you. What you do,how you do it and the explanations on how and why. If(and that is a big if) I stop watching it will not be because of you it will be because I do not care for the content. But just like the trawler (I live 600 miles from the nearest salt water) I watched each and every one and have loved them all. Who knows I may find diveing interesting and continue to watch. I hope that is the case.
Good luck with the change that is comming.
Thanks Steve, I hope to make it as interesting as I can.!
I'm going to miss your outboard motor videos but I konw anything your doing will be good can't wait mate👍
I'm still missing the Himalayan videos, how I first found Stu's channel ;-)
Wow Stu, the before & after of the engine bay look just stunning! Great job. And by the way, change is part of life, and everything evolves. I’m honestly looking forward to the future changes and the new adventures in your channel.
Thanks mate. I think the on-water stuff is going to be a lot of fun, and actually very similar in style.
Good tip: use a sink plunger to test the skin fitting and valve for leaks ... grease the edge of the plunger, stick it on the hull from outside, if the plunger is still stuck on half an hour later, then the fitting and valve don't leak. If it falls off onto the floor in 30 seconds .. you still have a leak. Saves hauling out!!
Good tip, I like that. :)
Not losing me as a sub mate. Countdown to launch and so happy for you. The engine bay looks like a factory build job. Well done. You always research what your plan is and know what the result will be. Looking forward to the engine going in.
Thanks mate. :)
It is taking shape, looking like a proper ship. That engine bay looks 100% better than the beginning. I think those fittings you put in are more then adequate for the water tight application of the ship I like them. can't wait to see her float.
Hi, thanks for the video. The stern gland should be allowed to drip a little to allow water to lubricate the packing AND OR put a greasing facility in the stern tube to allow the same, otherwise packing may burn out. EX sea going engineer, Shell Tankers. Again thanks for the entertainment.
Yes, I've been thinking about drilling and tapping a grease nipple into the tube. I'll see how it goes this year and maybe do that next year so I can compare.
You have done a damn fine job getting that boat to the condition it's in now. I'll be continuing to watch you and the adventures on this boat.
Thanks Herman!
I watch your videos BECAUSE you explain everything you are doing , keep up the good work . Nice Bilge Rat !
Omg check those bilges and get a photo, they will never be that clean again ! Great job Stu ...
Certainly not once the Detroit is back! :)
@@DangarMarine they dont call them drip triots for nothing lol hook the air box drain to a catch tank that you can pull out and empty
Great stuff Stuey, it’s amazing what a beer will do! I don’t know who’s looking forward to the launch the most....probably you but well you know 😂can’t wait for the Detroit re install 👍🏴
Yes, I'm really looking forward to getting the Detroit back in too. Launching is one milestone but having is running under its own steam is going to be even better.
"Let's just give 'em a tap" - priceless. Always love watching these vids. Keep 'em coming Stu! Well done!
😂 I thought the same ...... whack !
Hi Stu. Love the videos, especially the way you do step by step instructions on the instal processes.
You said about keeping the gland packing on the boat and then having some spare stern gland nuts on a cord by the strern gland. Why not get a watertight tupperware container and keep the gland stuffing, spare nuts and a couple of lengths of threaded rod etc. in it and tape it (or Sikaflex it) to the bulkhead close to the stern gland where they will be needed, especially in an emergency, rather than having to search through lockers.
Yep, having things grouped in containers by the job that needs doing is a good way to go. I think I said 19mm nuts in the video but I actually meant a pair of 19mm spanners to keep in the kit so I don't have to go hunting for them in an emergency.
Missed ya mate, love your professional knowledge and know how
Good luck for your launch, Stu
"zero degrees Stu" Just about spit my drink. LOL
Frank 0 stu, 15 c, 59 f. It’s still summer up here and this morning was colder.
@@briansmith3011 Fully aware as he explained. Thought it was hilarious. :)
As for Coopers time, I find Apia, Samoa gives you an extra hour head start.
Love the progress. Things are getting exciting.
Thanks mate!
That's rad...👍...Lunchtime in NZ...Beer o'clock in OZ... I've used that excuse many times before...🍻😎👌...
Your engine bay looks fantastic! And I love the little Bilge Rat :)
People seem to forget...or don't know...that today's "plastics" can be stronger than some metals...the only concern that I would have would be if you went into serious subfreezing seas.
Can't wait until the launch...congrats on getting the hull water-tight!
Interestingly, these stay very similar as the temperature drops but the metal fittings get increasingly brittle.
Ah...kewl...didn't know that :)
Really enjoying the progress buddy,just a tip,if you have slag inclusion and missed weld joints just go down in rod size and same amps and cook it out,trust me you’ll love 💖 it.Another thing is to make a raking tool out of an old inch size hacksaw blade,just grind a hook on it o rake out weld joints.
Two good tips, thanks!
Love the Chanel and stay true to yourself, you’ll never loose me as a follower.
The rebuild has been most informative and interesting, now the future of the Chanel and what the trawler will be used for sounds just a captivating too me, good luck with your adventures looking forward to seeing the progress and what you discover.
Thanks mate. I'm really looking forward to filming our adventures on the water. :)
Looks good. We use Forespar, Marelon seacocks on the Ocean Sport Boats that we build at Nordic Tugs. They are lightweight, strong, and will not seize up.
As to bilge pumps: as well as putting one in each bilge space that is not connected to the others, I would recommend putting an extra in the engine bilge. The main pump should be at least minimum recommended capacity, and then install a larger pump also, with the float switch set higher than the main. That way, if you get water coming in faster than the main pump can deal with, the higher capacity pump will come on if needed. This means that, under normal circumstances, only the smaller pump will be drawing current from the batteries.
Sounds like a good setup. I'll definitely be having two, possibly even three bilge pumps in that engine bay as it has all the skin fittings as well as the stern gland to worry about.
That is a beautiful engine bay, congrats.
Thanks mate. :)
Good stuff Stu!
Cute little helper ya got there! Looks like he doesn't eat much!
But he could eat off the floor if he wanted. ;)
Staying tuned, can't wait for her to get back in the water!
0 degrees stu...I was unaware of this measurement, you are right up there with Kelvin!
That paint looks great!
I saw a 28 foot patrol boat made by DGS defence. 100% thermoplastic. Called the DGS monster 28. Runs with ( up to ) 2 outboards, 600 - 800 up. They are out of Florida
Great job man, It has got to feel good to finally be done with the engine compartment and to see some of the fittings go on. Another great video as usual. Cheers mate, its beer o'clock :)
Thanks mate, it is a good feeling. :)
been out on my boat today had a few mackerel went to the wrecks had great day and a sun tan what more can any fisherman ask great vid stu engine bay looks like new well done
Sounds like a fine day indeed!
Hi Stu,
Summers on its way!!
Fantastic progress mate n all coming together, nearly time to wet the boats arse again.
Nyloc Nuts required on each end the stern packing studs, and plain locking nuts on the inside of the 2 flanges, on all 3 gland studs, will stiffen it all up also.
Measure the gap between the 2 flanges so gland packing is compressed evenly n lock it all in place with lock nuts.
Just for vibration mate and peace of mind.
Your doing fab mate
Cheers
Malc (Qld)
Hey Malc, you are dead right about the Nylocks, I'll definitely grab some for the ends. Would hate for it to vibrate out and flood in.
Thanks for sharing. Can’t wait to see her underway. 🇨🇱👊
Very good Stu, My wife always chuckles when you say Seacocks🤣. Anyway, really looking forward when you get back from the states and get the engine videos going
Thanks Tim, I'm looking forward to working on the engine again too.
Good video stu, great to see you making so much progress on such a big project. I would love to see more eddy.
Thanks mate. I haven't seen Eddie for a while either but once the boat is on the mooring I'm sure we will. :)
The boat is looking great. Its really nice seeing something come back to life. Doing a great job Stu.
Thanks Chris.
A hot water heater sure will come in handy once you start spending a lot of time in the boat. I guess you can put one back in later.
Yes, thinking of going instant gas though.
Great videos! I love the variety. Keep up the good work.
Some safety glasses or a grinding shield will safe you a lot of headache one day, unless you want to wear an eyepatch . Keep up the good work!
That's a lot of dirty, grueling work but it looks mighty good, Mr. Dangar!
Getting close!! Boat looks great.cant wait to hear that gm fire up👍
Thanks mate, me either!
Really have enjoyed watching this project . . . a great job on your part.
Thanks mate.
Another great video...I love the raw footage, there is so much useful information for any small boat enthusiast. When your nearing completion of the refurb it would be great to know a ballpark figure on how much it has all cost.
Thanks mate. I will go through all the budget in a video soon.
Can't wait for the next chapter, press on regardless. Want to see this boat floating and running. Great channel!😎
Thanks Ray!
Wow Stu, the engine bay looks incredible. I know that was a tremendous amount of work. Great job as always bud!
Thanks mate, glad it's finished finally!
One thing I've found was if you do dirty work, use a little gojo on your hands BEFORE you get them dirty. When it comes to cleaning them up, they clean so much easier since the gojo is under the dirt in your skin... Gloves work too.
All your content has been good, looking forward to more, no matter what you do
You forgot to mention that the beer will be a common thread as well? Haha... mate, it’s all good. Boats, engines, diving, ROVs.. keep doing it all.
Thanks mate, hope to have you on board one day soon!
Thank you for your videos, best marine channel!
Stu, your composite seacocks should be just fine. in America we use a very similar composite seacock brand called Forespar Marelon; i've got a few of them below the waterline and yes they are pretty tough... good job!
Hell yeah mate getting it done!
It’s getting ever closer,it’s strange you saying it’s warming up we in the UK are experiencing some freak hot weather really enjoying like your vid.
Must be nice to finally have a clean engine bay. Looks nice and shiny!
It is!
0 Degree Stu, your engine bay looks fantastic!
It’s always a good idea to double double not the stuffing box packing gland. Nice job with the boat.
Just remember to close and open the valves every 3 - 6 months. If they get stiff, it's lube time.
Cheers
comin along nicely.
Always keep changing and growing brother. You will always be amazing.
Wow! Renko is really looking like a new boat. Great job Stu! She really is a great machine. I’m excited to see her in action. I cant wait for your new videos.
Thanks Kris, getting close now! :)
Haveing a clean engine bay must feel great.
looking good i do love your motivation to the job at hand