Hi, I am planning to purchase this chip. Gen 4. Cx. Bosh flow app has to slides for tuning 1. One for assistance level (maybe torque) max +5 2 second for Dynamics max +5 Could you comment what your app adjusts? I think maybe assistance level What about dynamics ? 10x
Is this also working for the: Bosch Drive Unit Performance CX Generation 4 ?? Is ist pure software or Do I need to install a new chip? I mean add a hardware part or chip to the bike? Or is this purely software update?
Hey brother! Can you help me diagnose mine? I did install the speed box 3.0 but after the install the bike won’t start. Then reverse everything back to original and still won’t start. I did upload a video on my channel! Thanks
I saw on youtube today that if Bosch motors are "speed unlocked" they need to be pedalled for 90 minutes with the motor off; turn back on again and should be right. This can happen a maximum of 3 times then it has to go to a dealer. I'll look for the video; if I can find it I'll link it here.
from the look of your video you may have plugged the speed box into the wrong connection. There is three plugs with two red and black wires. You need the one for the speed sensor which is the grey one. The others are blue and black
I want to be able to run simple diagnostics, be able to install firmware upgrade, perform tuning and other custom functions on a Gen 3 Bosch CX motor but (and I stress, I want to keep the bike UK legal) does your chip and jailbreak software fit my requirements?
@@EpiceBikes Is the Purion Display Bluetooth? Have you Got a link to the App? Iv Derestricted my Bike with the magnet sensor on the Crank would any update Ruin the speed Hack? 😈
@@SuperiorNo1 The Bluetooth connection is broadcast from the unlock chip. Without the unlock chip installed the app won't work. Chip can be seen here czcams.com/video/Ysazbx9bAZ4/video.html
in viêt nam, we has ebike, klara s branch, used Bosch Ecu which to control 1200w electric motor, so we can unlock that ecu
Hi,
I am planning to purchase this chip. Gen 4. Cx. Bosh flow app has to slides for tuning
1. One for assistance level (maybe torque) max +5
2 second for Dynamics max +5
Could you comment what your app adjusts? I think maybe assistance level
What about dynamics ?
10x
Hi, The Eplus chip adjustment is independent of the Bosch flow app. It adjusts motor assistance levels allowing customization to your needs.
Is this premium app? Where are can find this?
What is the app that we need to download?
Is this also working for the: Bosch Drive Unit Performance CX Generation 4 ?? Is ist pure software or Do I need to install a new chip? I mean add a hardware part or chip to the bike? Or is this purely software update?
A chip is required to be able to use the functions within the app.
My bike has the 750WH battery. Can I use this?
Yes if you do no have the bosch smart system, A different chip is required if you have the bosch smart system
Do you have to wait before turning off the ebike?
Yes best to no longer turn off the bike and let the bike turn off by itself
Does the Bosch anti tuning software locate the chip if I drive with often Speed, all the time ?
Any fault codes?
Hey brother! Can you help me diagnose mine? I did install the speed box 3.0 but after the install the bike won’t start. Then reverse everything back to original and still won’t start. I did upload a video on my channel! Thanks
I saw on youtube today that if Bosch motors are "speed unlocked" they need to be pedalled for 90 minutes with the motor off; turn back on again and should be right. This can happen a maximum of 3 times then it has to go to a dealer. I'll look for the video; if I can find it I'll link it here.
from the look of your video you may have plugged the speed box into the wrong connection. There is three plugs with two red and black wires. You need the one for the speed sensor which is the grey one. The others are blue and black
hello, it's now mid 2020 and Bosch just had an update for the CX that upped the torque. Will this affect the way this device works or not. Thanks
Hi Mate, Yes our chip is compatible with the latest Bosch update that increased the torque to 85NM.
@@EpiceBikes Is that Display Bluetooth? can i use this App with Bosch Purion Display? 😈
@@SuperiorNo1 The chip makes a BlueTooth display, but it also uses the Purion display too.
Does the walk function still work with these chips?
Yes walk function still works and chip can be programmed to use another button to activate if desired.
@@EpiceBikes Thank you. I am very keen to receive mine.
I want to be able to run simple diagnostics, be able to install firmware upgrade, perform tuning and other custom functions on a Gen 3 Bosch CX motor but (and I stress, I want to keep the bike UK legal) does your chip and jailbreak software fit my requirements?
Is that Display Bluetooth? can i use this App with Bosch Purion Display? 😈
Yes also works with Bosch purion display
@@EpiceBikes Is the Purion Display Bluetooth? Have you Got a link to the App? Iv Derestricted my Bike with the magnet sensor on the Crank would any update Ruin the speed Hack? 😈
@@SuperiorNo1 The Bluetooth connection is broadcast from the unlock chip. Without the unlock chip installed the app won't work. Chip can be seen here czcams.com/video/Ysazbx9bAZ4/video.html
@@EpiceBikes Mine isn't chipped just Hacked 😈