Well done..you did a fantastic job. Well crafted,simple and straight forward.... Laboratory TECHNOLOGIST in Mechanical engineering University of Port Harcourt Nigeria.
Okay thanks. The unknown mass is 30g though I got 0.01g-¹ or 10g, it's within of 30g. They mark range,if the range is within the mass given,you will be marked correct
Well precised
Will the twine be tied for Us and you did not mention the use of the retort stand
Aunty good evening my question is that are we going to use drawing board with paper on it
Yes
Well done
Job
Nice
Thanks
Well done dear, good job ❤
Thank you dear
Well done..you did a fantastic job.
Well crafted,simple and straight forward.... Laboratory TECHNOLOGIST in Mechanical engineering University of Port Harcourt Nigeria.
Thank you
Is there any expected question under this mechanics? Like after your precautions.
there should be
Yes,there should be
Nice one 👍🏿. But you did not provide the question and we did not get to see the weight of the unknown mass
Okay thanks. The unknown mass is 30g though I got 0.01g-¹ or 10g, it's within of 30g. They mark range,if the range is within the mass given,you will be marked correct
@@Jossyphysicsonlineclass what about the question with which you carried out the experiment?
Keep your questions coming
Please this is urgent. How many papers per student or can we use one paper for all the masses??
Okay.
Thanks
Thanks
How do we do intersept
By noting where the line cuts the axis
Ok
Make playlist PHYSICS practical in details theory explanation
Okay noted
Weldone
Thanks
Won't the mass of the mass hanger affect the accuracy of the experiment?
Not at all
No, you have to note the mass of the hanger, and substrate it from the mass given
I thought slope is where your point meet in the line
Yes
Why two pulleys
I used only one pulley, but I have to suspend the thread with a thumb pin so as to enable the mass hanger to balance
Well done ma'am. Please are we going to perform the experiment on a single white plane paper or for different White papers?
Use A3 white paper
Well done
Job
Thanks