Comet Gearbox Build for 5.5 GPM Pressure Washer EZ ASSEMBLY
Vložit
- čas přidán 24. 07. 2024
- Comet Gearbox Build for 5.5 GPM Pressure Washer EZ ASSEMBLY on this pressure washer build
Plantation by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Artist: audionautix.com/ - Jak na to + styl
I'm no mechanic, but I sure do love to watch things come together like that. Thank you, Rusty!
Oh.. thanks so much for watching
I love working with nice clean new parts . Love the video
Thanks, and I agree on new parts
Great video Mr Rusty Rooster, all done without reading any instructions 💪🏻
Thank ol-boy I appreciate it
Well done Rusty looks like you have it down nice to see you Active again
Man o Man I sure appreciate ya watching
A pleasure to watch Rusty 👍🏻
Thanks ol-buddy
Another job well done RR! 👍🎥🐓🇺🇸
Thanks a bunch Roger
Thanks man as always great job.
Much appreciated thanks for watching
Nice video Rusty, looks like a pretty solid gearbox. 👍
Thanks Big John ... So far it's been a good one
Anytime brother, good deal.
Pro stuff Rooster - thanks for sharing👍👍
Thanks for watching
good vid on the channel thanks lee
Thanks Lee
very nice pump!
Thank you! Cheers!
It looks like you've done this before lol. I've never done this before so thanks for the video my friend 🔧👍
Lol.. thanks only done it a few hundred times
Spent 2 hours looking for torque specs. Turns out it's about 5 to 10 ugas.
Thank you sir
Torque wrench? Be confident, it's tight when you say it's tight... thanks a bunch 🐓 👍🏻
Yep Ugga Dugga is the correct torque Lol Great job my friend.
I knew you would appreciate a good UGA-DUG-A.. thanks MY FRIEND
This guy's great😂... Now I'm gonna let those marinate.
Tell em ol buddy, tell em just how it is. Lol thanks for watching
Well done !! Now it’s time for some of Granny’s Brunswick stew..
I'm ready
Glad to see you back on here more often 👍
Me too! I do it all just for you and my biggest fan, RW 😆
I'm not sure if I got the same gearbox or not. I got the ZGRS1000 Gear Reducer from general pump and I have a 5.5 ts2021 connected to it. I don't know why but either the gearbox or the pump is making a whining noise. No idea what it is or why or if its normal. Pump is working fine. No leaks detected. Everything bolted up just fine.
Just make sure the gearbox oil level is correct. Change thar gearbox oil often about 20 hours of use then every 100 hrs after that. Gearboxes do have abit of a whine to them.
I’m using one of these now. It leaks terribly. I’ve taken it apart 4 times trying to fix it to no avail. I’m going back to the PA gearbox next time. The leak is coming from the smaller o-ring that mates to the pump. It needs to be slightly thicker so it will seal better.
PA is a good, trusty gearbox. Have you tried a little thicker o-ring?
No I haven’t. I didn’t take the time to measure it. Where could I find one? Is that a common size?
@toddluns1 not sure... I haven't tried it... was gust a thought.. might just try and match up an oring or try and add a small amount of silicone gasket to help oring seal
Great video what model is the comet gearbox
5005.0207.00 is the COMET part number I used. 2.2:1 gear ratio. Hope that helps. Thanks for watching.
How do you go about sizing the engine when building a gear driven or belt driven pressure washer? Looking for 8GPM @ either 3000 or 3500PSI. Possibly 5.5GPM @ 3500PSI.
Pump manufacturers publish all the pump specifications and horsepower requirements on their websites. Lots of good info.
I'm using 14hp gear drive for 5.5gpm builds and 23hp for 8gpm
That's the first time I've seen a gear box on a pressure washer most of them are direct connect to the engine
Thanks Robert, A Direct drive system would be turning at 3400 Rpm the pump im working with needs to turn at 1450 RPM so gearbox reducer or belt drive to accomplish this and gearbox works best for my application.
@@TheRustyRooster thanks for letting me know about that matter young man 👍😎
How much loc-tite does one use in a weeks time ?? 🤘🏼😎
Hey hey Jimmy ol buddy. I use alot, one drop at a time. I'm using loxeal sealant it's a lot like blue loctite but
For high psi.
Which gear screw is that? What dimensions does she have?
Gear ratio 1:2, 19
Mounting flange is SAE J609A
Hello brother can you tell me please what is the purpose to install gearbox in pressure washer
Use either a gearbox or belts and pulleys to turn the pump at its proper operating RPM. In this case I need the pump to turn at 1450RPM.
@@TheRustyRoosterso the gearbox slowed it down
How many hours before changing gear oil?
Great question
I go 100hrs. On gearbox and pump 50hrs on engine. Thanks for watching.
I have 0,5 l Oli in the Gearbox its this ok ?
The comet gearbox holds right at 300ml. This should bring it up to halfway of the sight glass
Was für eine Entlüftungschraube ist auf der Gearbox Miselli 1/4 ?
Wie sind die genaue Daten der Schraube ?
Meine ist kaputt
Translation?
@@TheRustyRooster Which gear screw is that? What dimensions does she have?
Just give the bolt a good ole German Good N tight
Yes sir you know it
Hey What's up ✌️😁😁
Hey-hey how goes it.
So nice to have new equipment all sparkly clean salute 🫡
Thanks Bill. You are sure right about that