Edgun Leshiy 2 hydro testing repeat as first test had an unfortunate mistake.
Vložit
- čas přidán 15. 05. 2023
- First of all I apologize for the inconvenience the first videos might have caused to everyone involved.
There was an unforeseen incident that resulted in possible false pressure reading and yielding of the cylinder in a wrong indicated pressure.
A piece of O-ring was found in the pressure port leading in to the gauge, it must have caused a faulty reading of pressure and the real test pressure was higher than indicated bu the gauge.
I have taken down the videos for not to confuse people with wrong information.
And I need to thank Ed from Edgun for providing new cylinders to the gun, I chose to rerun the pressure test with them as I was slightly puzzled by the results of the first test and after analyzing the material.
The cylinders passed 460bar test and second set was tested to 520bar just to be sure and it passed that as well.
So feel free to roast me in the comments.
Thank you all for watching, stay safe and have a nice day - Věda a technologie
Hilarious !!!! You should be thanking Ed for not taking you to court for slander ?!!!
Preliminary testing. 🤦 Doesn't matter. Whether errors were made or not, Ed's not even done with his testing. There is still an exploded cylinder. So anything goes at this point.
Marko's testing got Ed to take this seriously. That's a win in my book.
Good luck with the slander considering Marko has already admitted to his errors and you would have to prove malicious intent.
Go have another pint.
🤡
Call it what you like, I call it as I see things, honest review of a failure in testing. I rather be wrong sometimes than be silent forever. Issue was found and resolved, I think that stuff happen all the time, people are too afraid of failure to speak up at all.
Wish we had a guy as skilled and knowledgeable to check all the pcp air tanks. Like the AEA tubes. And other cheaper brands. Crazy this one is so expensive and still not that safe.
i have great respect for a man and you are sir! taking ownershp of your mistake is to be applauded!!! and for the record i also feel any potential for a stres riser should be eliminated!
Thanks Marko.
Still doesn't change the fact that a cylinder exploded.
I hold nothing against you. This is part of troubleshooting.
I hope Ed is honest with his testing results.
Will you still be making a cromo cylinder for your friend?
Yes eventually, as he doesn't like the aluminum ones ans they won't last indefinitely
You should be sued for slander
That is just silly. The guy simply did his own independant tests and provided a second opinion. Which should be welcomed, mistakes and all. It also doesn't change the fact that a pressure vessel failed catastrophically at roughly 200bar, without a conclusive reason why. If you wanna put 100% of your faith into a single company, then I wish you the best of luck with that. To me, that is like when the government investigates itself, and then concludes it did nothing wrong. Again, 3rd party involvement should be welcomed.