Ford Focus MK3 Smart Key add/programming with the IM608.
Vložit
- čas přidán 4. 11. 2023
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
In this quick video, I will just be taking you through on how add/program a new smart key (hands free), to a 2012 Ford Focus.
Will be using the IM608 to perform the task.
Link to the video mentioned:
• Ford Focus MK3 2012 R...
IM608 videos playlist:
• IM608 Pro
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching! - Auta a dopravní prostředky
Funny, i did a 2015 focus keyless on friday.
You can delete all keys with the All Keys lost function. It will erase the old en then program the keys you have.
I do this on all the cars i get (i'm a car locksmith). I always find it a security risk.
If you add keyless key, keep the old key away from the car, or remove the battery..
I was supprised to see you have M608. i didn't watch a lot of youtube the past year.
I use 608 most time for BMW/Mini and Renault/Dacia. It's a good tool to have beside my Zedfull, Smart Pro and lonsdor 🙂
Good to know... I don't do many keys, so it is a learning curve for me...
👍👍👍
Thank you for another great video!!!
☺️
👍👍👍
Good morning Luis. Thanks for sharing your method in programming the car key
It’s great that you have the Maxisys as car dealerships charge a small fortune. Just on another subject when do you think you will upload videos on your exciting car journey from the UK to the Nuremberg Ring in Germany? Cheers 😊
No worries...
Not sure yet... too many things to go over at the moment...
👍👍👍
Because you have now 3 keys, probably you can delete first one which is stolen, again, because there was condition written minimum 2 key's. Im just curious...
I am guessing you can do that...
I should have tried to be honest..
☺️
@@LMAutoRepairs Me too...for that's reason im asking for... whatever...
Was it a OE key or aftermarket?
Awesome
☺️
Thanks!
👍👍👍
Hello, I want to ask why some computers are not suitable for the cloning process, especially for the motor computer, especially the VW. Rather, the agency’s device must be used. What is the reason?
good morning Luis i tried to program a 2009 fiesta key it gave me a out code to get a incode which would change on the next key cycle do the im 608 change the way the immo is accesed thanks
Yes...
At least in this case...
👍👍👍
or have ford changed the access system from incode outcode on later and or different models thanks@@LMAutoRepairs
@jackiemay9471
Yes, I believe he has changed...
👍👍👍
Hi mate, so you programed brand new orig key or second hand orig key? some times second hand orig key needs to be virginised to be programed again. Thanks for video.
The key was new aftermarket... was not genuine.
Yes, second hand keys need to be blanked/virginized prior to program again...
The IM608 can actually do some keys...
👍👍👍
top
Thanks!
👍👍
The IM608 has a full diagnostic tool built in which I thought was as capable if not more capable than your older maxi sys, why don't you use the 608 instead of your maxisys?
The IM608 diagnostic capabilities are the same as the MS908P indeed...
It is just the flashing of the BMW and Mercedes that the IM608 is not capable of...
The MS908P is more battered now, more of the work horse...🤪
👍👍👍
Do you recommend im608 or elite?
I would say the elite, unless you need to to keys, eeprom and MCU work...
👍👍👍
Was it a OE key or aftermarket?
You didn't had to make dealer key?
Aftermarket...
👍👍👍
@@LMAutoRepairs what about dealer key? 🤔
What about it?
👊👍
Fabi my friend widzę że oglądamy tych samych youtuberów😉 Pozdrawiam i dawaj więcej filmów👍
@@faceman7516 Pozdro 😎👊
05:17
Staggering that the guru's who design and build these units get a big "F" on their spelling/grammar.
"learned" 🤦♂
☺️