Holt Pneumatic Fluid Extractor 57056 Review
Vložit
- čas přidán 9. 02. 2021
- In-Depth Holt Pneumatic Fluid Extractor 57056 Review. Is it really worth buying from Harbor Freight? This Holt fluid extractor has definitely satisfied my oil extraction needs. At the price, you can not go wrong with this pneumatic fluid extractor purchase. One of the best fluid extractors I've seen at Harbor Freight.
Holt Pneumatic Fluid Extractor 57056
bit.ly/2Z25bo6
__________________________________________________________
Join The Facebook Group Today!
► / smallenginenation
Want a FREE stock? Join Robinhood with my link and we'll both get a free stock 🤝
►join.robinhood.com/filippc-9b...
Join this channel to get access to perks:
► / @fillslawncare
Keep Up With Us!
► Subscribe To Our Channel: bit.ly/32jZJis
► Hit The Bell To Be Part Of The Notification Squad!
► Follow Us On Twitter: bit.ly/325XjE3
Why you should start a small engine repair business in 2020!
▶ bit.ly/2Gtnlti
Help us grow our channel & business by sending us a gift from our Amazon wishlist
▶ amzn.to/376OHAe
You can also support us by making a small donation to "Fill's Small Engine Nation" Channel
▶ bit.ly/3mTWPIT
__________________________________________________________
Top Every Day Used Tools In My Arsenal
►6L Ultrasonic Cleaner - amzn.to/3n6uTlt
►Oregon Spark Plug Tester - amzn.to/3kdWmQc
►Milwaukee 3/8" Drive Stubby Impact - amzn.to/36jilQQ
►Milwaukee 3/8" Drive Ratchet - amzn.to/3eL0Rk6
►Compression Tester - amzn.to/2JVLr1c
►5 Piece Spark Plug Socket Set - amzn.to/36jXAEC
Our EDC Gear
►Samsung Galaxy S20 Ultra 5G - amzn.to/2GC3iJg
►Selfie Stick Tripod - amzn.to/3exHuei
►Samsung Galaxy Buds+ - amzn.to/3l71Nld
►Black Carhartt Hat - amzn.to/3ey6cuR
►Milwaukee Fastback Utility Knife - amzn.to/35g0ESR
__________________________________________________________
Due to factors beyond the control of Fill's Small Engine Nation, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Fill's Small Engine Nation assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Fill's Small Engine Nation recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Fill's Small Engine Nation, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Fill's Small Engine Nation.
#smallenginerepair #holtfluidextractor - Jak na to + styl
Do you use a fluid extractor in your business?
Subscribe to our channel with one click:
bit.ly/32jZJis
Help us grow our channel & business by sending us a gift from our Amazon wishlist.
amzn.to/36fhqRw
Not for business but for personal use I do. All the cars in my family have oil filters on the top of the engine so doing an oil and filter changed means no more going under the car.
Just purchased one of these for my Chrysler Crossfire oil change. It has a Mercedes 3.2 with the oil filter up top. I'm not going to have to crawl under my car now that I know how to use it! Thanks!
2 min. is good run time on cold day. I have the green hf one. Love it. I used it in my last video and mentioned you in the video.
Thanks for the mention Bob and thanks for sharing 👍 Have a great day
@@fillslawncare Yeah, was wondering if HF still has the metal extractor I noticed you went with the plastic one didn't know the price difference?
Covered it perfectly TY
The $89 version has a manual hand pump to create a vacuum in order to start the siphon so you do not need a compressor. It is also a manual process to empty the reservoir by dumping it into a container. I tried mine to remove the oil out of a hydraulic pump reservoir on a zero turn mower project. It works great! I usually store my tubes on a nail on the wall. You just have make sure that the tubes are empty so they do not drip. Nice demo!
Thanks for sharing!
I think that's a great purchase. Think I will be getting something like that in the near future. Thanks or the videos Fill!
Thanks for Watching 👍
Good Morning, Even if you want to open the oil drain nipple or oil drain plug on the engine oil pan or whatever the case may be - You will virtually eliminate the sudden outflow of oil or other fluid by using the extraction process.
Also I also use a 12v extraction pump that I purchased from off of eBay in which I pump the engine oil that I have extracted into various empty oil containers in which I usually take to the local AuroZone for recycling of the used oil.
By doing this, I reuse the empty plastic containers as well as properly recycle the oil - A win win all around. Thanks for your great video.
Thanks for sharing my friend 👍
That's nice. Hope you get lot of use out of it. Great explanation of how its used.
Thanks Rooster 👍
I have the other big green HF extractor in my shop. I use it all the time. I tip push mowers up and put a chunk of 4x4 under one side and let it set for a few minutes before i use the extractor.
Oh awesome thanks for sharing
Cool I liked it very informative
I think I need to purchase one of these. I have been changing the oil on all kinds of units. I always without exception make a dang mess! This will save on "Oil Dry" as well.
Yeah that's true. Thanks for watching!
Yeah I got one similar over here in the UK 🇬🇧
Awesome Mick thanks for watching!
i do now,but for years i just drained or dumped,but its worth it for time and less clean up.
Awesome thanks for watching 👍
Thanks
So my question is what psi were you set at on the air compressor regulator?
Would love to have one and need one also to save time 😊
Great Video!
I have used a Holt extractor for years. At least they made the outlet 90 degrees on the new ones. Mine is straight up and likes to slip out once in a while.
Oh nice thanks for sharing Ken
Unless i missed it how much psi are you putting in the pump?
Great review. Not sure I would want one that can not do gasoline though. But for oil changes looks pretty good. I wonder how much oil you get out from the usual tipping the mower over and draining. Seems like the heavy crap would stay at the bottom which is not what I would want. But I have nothing better to recommend. So looks like a great investment to me. Thanks for the video.
Seems to work well for me, especially when you don't have access to an oil drain plug or the plug is simply in a bad location
How has the endoscope been working for you? Is there a way to link to where you got it or is it one of those things sold by a different company every time you look for it on Amazon?
Great detailed video Fill. I really liked that endoscope and have been thinking of getting one to go with my Samsung phone. Which one are you using and how do you like it ?
Oh I do not remember I got it off ebay a long time ago. Depstech I believe is the company name?
@@fillslawncare BTW what you did for David last night on the live stream was awesome!! The new logo you made for him was a heart felt great thing. You are doing a great thing helping others.
Anything to help a friend out 👍
What size air compressor do I need can I do it with a small one
great vid! curious what brand oil do you recommend for toro 4 stroke engine?
Brand really doesn't matter. I use briggs sae30
Biggest thing I see is no mess or turnover mower to drain it
Less oil on floor the safer the work place from falling
$149 now