Interior Metal Wall Framing, Plumbing, Mechanical and Electrical Installation in South Florida.

Sdílet
Vložit
  • čas přidán 8. 03. 2023
  • Interior Metal Wall Framing, Plumbing and Electrical South Florida
    With the shell complete, we're going inside our two-story masonry house to
    build out the interior metal wall framing.
    Come along as we install the interior framing, mechanical,
    electrical and plumbing at our build a house project in South Florida.
    BTW - This segment is part of our 'Build a House' series available at -
    www.EngineeringPlans.com/build
    ( Also - check out our Florida Product Approvals search at FloridaProductApprovals.com )
    The contractor selected the use of metal
    studs to create the interior wall partitions.
    We start from the top. The building plans help installers frame
    out the partitions on the concrete foundation. The room is laid
    out and with luck the plumbing and electrical piping installed
    during the foundation pour line up with the walls.
    Metal stud bottom tracks are secured to the concrete foundation by shooting
    drive panes with 22 gauge power actuated fasteners air guns secure pressure treated wood
    framing studs against exterior masonry walls. Vertical studs are secured to the top
    and bottom tracks with metal screws.
    The interior metal wall framing is constructed from the building plans and is inspected by City officials
    prior to continuing.
    Metal studs are placed alongside wood roof trusses for a level ceiling finish and to frame out tray ceilings
    architectural features like this electric fireplace wall are framed out
    which also helps hide columns that didn't lie center to the wall.
    Wood blocking is added to metal studs to
    provide stiffness and laser levels help
    keep everything level.
    Wood door openings are framed to help
    stiffen and secure door installation and
    windows are framed to provide support
    for drywall ends.
    The same work continues upstairs attaching
    floor tracks to the plywood framing and
    wood trusses above.
    We then encounter a problem - This door location was changed and not
    caught during installation framers quickly remove and relocate the
    door easy when it's just framing but difficult to do afterwards.
    With the framing complete, the Plumbing can be
    installed. Hot and cold water force mains
    and drain lines are constructed through
    the walls and Floors and the plumbing
    fixtures noted on the plans.
    Another problem arises there's a break
    in the water line which was identified
    and required the slab to be cut so the
    pipe can be properly reinstalled to
    ensure no leaking occurs in the future.
    Showers are formed with wood curbs and
    lined with felt paper they will be
    formed with concrete then overlaid with
    shower pans and finished with tile
    The shower diaper is installed to
    provide the hot water cold mix PVC pipes
    are fitted, cleaned, leveled and glued in
    place before walls can be finished
    The finished piping is pressure tested to
    pass inspection.
    With the plumbing underway,
    the air conditioning ducts are installed in and
    around roof and wall framing both send
    and return lines are installed to
    provide a uniform cooling process
    throughout the house.
    Air Handlers are tucked under stairs and
    similar hideaway areas. Air conditioning components will also
    hang here from the garage from chains so
    it's up and out of the way but
    accessible for maintenance.
    Next, we handle the electrical within the wall framing.
    Each wire to the outlets switches and ceiling lighted is
    routed through the circuit breaker panel
    and through pre-cut holes in the metal
    framing to their final destination
    throughout the house.
    Positive, negative, neutral and ground
    wires are terminated and await final
    switch or outlet installation after the interior
    walls are finished.
    Wires end up at circuit breaker panels
    awaiting final connection. It looks messy but there's a logical
    method to installation.
    With the plumbing, AC and electrical rough
    work in place within the interior metal wall raming,
    drywall is delivered and
    awaiting approval to be installed. That's
    an entertaining process you won't want
    to miss.
    So check out or drywall installation episode at
    • How to Install Drywall...
    Learn more about Engineering Plans and our Build a House Series!
    *** Engineering Plans
    www.EngineeringPlans.com
    IG - Instagram.com - engineeringplans
    FB - Facebook - / 100086722971809
    Email - social@engineeringplans.com
    Watch the entire 'Build a House' series at engineeringplans.com/build

Komentáře • 3