I just removed all my slids for a paint job from my am323s. I use my acythylene torch to heat the allen bolt to red hot, but just before melting away the allen head. Then i take the allen key, quickly hammer it in and it will spin easily. Then i cool it down with compressed air while turning it out. Worked on every single one. And it was quite rusty, all my nuts on the back of the skids were rusted to the point even a 16mm 6 point socket spun right over it. No more drilling!😅
I just removed all my slids for a paint job from my am323s. I use my acythylene torch to heat the allen bolt to red hot, but just before melting away the allen head. Then i take the allen key, quickly hammer it in and it will spin easily. Then i cool it down with compressed air while turning it out. Worked on every single one.
And it was quite rusty, all my nuts on the back of the skids were rusted to the point even a 16mm 6 point socket spun right over it.
No more drilling!😅
Must be nearly time for mowing
Hope it all goes well with harvest 👍👍
Yes starting next week weather permitting 🌞🤠