How to attach an Anubias plant on a piece of wood in an aquarium.

Sdílet
Vložit
  • čas přidán 23. 10. 2018
  • In this how to video from Rock Beach Aquatics Tim shows us how to attach an Anubias Nana aquatic plant to a piece of Mopani wood.

Komentáře • 38

  • @A_o7_
    @A_o7_ Před 2 dny

    Beautiful shop! Love how great the plants looked. Too many stores by me have dead plants all over their tanks. Doesn't make me want to purchase thats for sure

  • @MVS846
    @MVS846 Před 4 lety +7

    Thanks so much for your help!! I was really so sad to tie them with some other. This is great.

  • @j.aguilar590
    @j.aguilar590 Před 5 lety +2

    Great info! Thanks for sharing

  • @jamesnorwood4084
    @jamesnorwood4084 Před 5 lety +15

    Attach to the wood and immediately spray with water for nearly instant set.

  • @JulianGarcia-sz1bv
    @JulianGarcia-sz1bv Před 4 lety +15

    Can the wood be wet or does it need to be dry?

  • @FishRfun
    @FishRfun Před 6 měsíci

    Great information, but i have 3 anubias broad leaf coming and have cracks/crevices/holes in some driftwood that i was just going to wedge in there...no glue or anything. I figured the roots would grow in to the wood...your thoughts? I do have the glue because im also gluing 3 java ferns to stones when they come in, but if like your thoughts...thank you

  • @FishRfun
    @FishRfun Před 8 měsíci

    Do you use the gel because the plant is wet? Also, I used clear drying gorilla glue to glue some flame java moss to a piecevof driftwood and it dried white and it was a gooey mess. Thank goodness it flourished and it's overgrown the white. I now want to do anubias and more java moss, unless you can recommend a moss that's a better filter than java, but on these it's in spots that it would show that white, and I don't want to see that white. Does this super glue gel dry white?

  • @asifali007
    @asifali007 Před rokem

    can i use liquid super glue instead of gel type with cotton pads?

  • @anlockcharacter1104
    @anlockcharacter1104 Před měsícem

    How long should the light on for anubias nana petite?

  • @rickpaduana6374
    @rickpaduana6374 Před rokem

    How long before you can put it in the tank with fish after doing this

  • @gilberto518
    @gilberto518 Před 2 lety +1

    I did mine today and it died. I didn't use the correct glue. It doesn't say cyanoacrylate. I had it for almost 3 months.

  • @MisterCaution
    @MisterCaution Před 2 lety +2

    Does it matter which part of the Anubias plant is embedded in the glue?

    • @rockbeachaquatics2481
      @rockbeachaquatics2481  Před 2 lety +1

      Hi there! Yes it does. Glue it to the rhizome. Everything will grow off of that. Thanks for watching!

  • @peadarmurray7994
    @peadarmurray7994 Před rokem

    Super glue doesn't contaminate the tank? Never would have thought you could do this!

  • @luvmywetpets
    @luvmywetpets Před 2 lety +1

    does the wood need to be dry before gluing the plant?

  • @reyesrey96
    @reyesrey96 Před 3 lety +3

    Can you put the Nubias plant in the gravel? Or it has to be on a wood? Curious because I bought 2 plants of Nubias for my 10 gallon tank 🤔

    • @RattyJennMunson
      @RattyJennMunson Před 3 lety +4

      No. If you bury the roots/rhizome it'll die.

    • @shiyadh7355
      @shiyadh7355 Před 3 lety +3

      @@RattyJennMunson root rot same with java fern

    • @user-qo6il9vg3n
      @user-qo6il9vg3n Před 2 lety +1

      You can bury it in the gravel, just do not cover the rhizome. The roots will be safe if planted because I’ve had two planted in the substrate with the rhizomes above the substrate and they are doing just fine.

  • @paperchaserrrs
    @paperchaserrrs Před 4 lety +4

    Can I do the same with a teracotta pot?

  • @mitchrawles
    @mitchrawles Před 3 lety +11

    How long do you have to wait before you put it back into the water in your tank after you glue it to the wood or rock? Will it kill your plant if you leave it out of the water too long?

    • @rockbeachaquatics2481
      @rockbeachaquatics2481  Před 3 lety +12

      It would take a while to kill the plant. Just wait until its dry. Only take about ten minutes. Plant will be totally safe. Have fun!

    • @mitchrawles
      @mitchrawles Před 3 lety +4

      @@rockbeachaquatics2481 thanks

    • @macsdf1
      @macsdf1 Před rokem

      superglue and water should insta set

  • @randy4799
    @randy4799 Před 3 lety +3

    How many hours of light does anubias need

    • @rockbeachaquatics2481
      @rockbeachaquatics2481  Před 3 lety +1

      Anubias has one of the lowest light requirements for a plant. I always suggest 8 hours a day. That can depend on the type of light you are using. But its a good starting point.

    • @randy4799
      @randy4799 Před 3 lety +1

      @@rockbeachaquatics2481 thanks for the info,appreciated

  • @jfy1
    @jfy1 Před 4 lety +2

    Wil this glue work for moss and does it dry white

    • @rockbeachaquatics2481
      @rockbeachaquatics2481  Před 4 lety +2

      Yes it will and yes it does dry white. So use sparingly of you don't want it to be seen. The moss will grow pretty heavy so honestly long term you won't see the white.

  • @NA-lp2re
    @NA-lp2re Před rokem

    I don’t get how the glue doesn’t pollute the water.

    • @stoneysscapes7544
      @stoneysscapes7544 Před 11 měsíci

      It's like a piece of acrylic , and after it gets wet it will be safe and make sure it's Cyanoacrylate and I am sure it's safe and I think most people will use way more than necessary, hold it down 10 - 30 seconds and either wrap up w paper towels or in water asap

  • @rae9846
    @rae9846 Před 5 měsíci

    Dumb question: can I glue plant to fake piece of log or does it have to be real driftwood

    • @straightouttacornwall
      @straightouttacornwall Před 5 měsíci

      Not dumb at all. Yes you can, as long as plant has something to attach to you're good to go :)

  • @tezzasbigbuz3933
    @tezzasbigbuz3933 Před 11 měsíci

    Floss you mean rockwool