If you want to see how well this Amazing DIY Lawn Stripe kit works, go and check out my video called "5 LAWN TOOLS YOU CAN BUILD" to see it in action!!
@michaelklinger395 I built it in February so the temp was 45 degrees out. Watch my video called 5 tools you can build...I show it working in that video
Awesome stuff. I have just made this last night and a couple of things: 1. I put my roller length to the centre line of the wheels after originally NOT listening to this video recommendation and put the pipe longer than the wheels. The result was an awful lawn stripe as there was a cancellation effect from the return pass as the pipe had already half folded the grass. Had to take it all apart, cut the pipe and reassemble everything. 2. Add a 40mm x 4mm thick flat bar to the the return bracket that receives the eye bolts from the roller to stiffen it up. Cut the grass with it on last night and it works great. Far better than other rollers out there that use carabenas to hook in to the mower meaning you can't reverse.
My lawn "striper" is simply to cut my lawn 10am. Early enough to still be moist but dry enough to not clump mulching. The stripes looks pass my teenage daughter's approval. "Dad, you got better." Someday, I will make a proper striper, someday. 😆
I just made a lawn striper for my tractor Using the frame of a spiked aerator That I haven’t used in forever. I replaced the spikes with 3 inch PVC , utilized the shaft from the aerator and will be filling the pipe with pea gravel. I’ll be trying it out for the first time this weekend
Just finished making mine. While every mower may be different my changes were as follows. >10" L bracket (all items from hd) >Same ideas for opening holes, note that the top hole and the first or closest to the L were what needed to be opened up. >noted for my 22" toro I ended up not using the frame I opted for use of the two large bolts on the handle. I work on these tools at work. So cost of replacement bolts and the large nuts are about 10 bucks tops if it messes up in use. > the brackets take some getting use to. However the results were def a win. > I also note that in my case I had to modify my pipe itself to 22 inches or so as the end caps added to a point I could attach my steel pipe endcaps. In construction of project my pipe threads got messed up. By trip three to home depot because I messed up and grabbed 3" end caps and the pipe thread being messed up i only paid once for my steel pipe. But all worked out. I had to cut the pvc to 22 inches as the end caps add a little more length to overall construction. End all beat all though it works well. I can see the stripes even at night so I can't wait to see what it looks like tomorrow morning in the sun.
Best DIY design I have seen so far! I like that it doesn’t require drilling holes into the body or the flap of your lawn mower. I also like the larger 4” diameter roller, just like the expensive ones 😊
I’ll look forward to seeing that. I subbed when I saw your lawn level video earlier this evening, also liked the above ground water system. All great DIY designs!
@@TheLawnDaddy I agree, best DIY design. Quick question, can you still attach the rear bag with the roller on? I’m looking to do this but I need to pick up the grass clippings. Thanks in advance 🤙🏽🤙🏽🤙🏽
Thx, glad you like the design. To answer your question, yes you can attach the bag and use the roller. Instead of bagging, have you considered side discharging? It's better for your lawn especially if you have fertilized...if your grass is long you can always double cut to avoid long clippings sitting on top and dying off.
@@TheLawnDaddy cool man! Thanks for the reply. On my property I mulch it but I do a few neighbors and they want it bagged. So hopefully once I got one made and gonna stripe a few of them to Surprise them to see what they say. I was considering just rolling the grass after it was cut WITHOUT the lawnmower to be able to make them easier as something it’s awkward to cut straight lines when they the lawn curves and retaining walls everywhere 🤦🏻♂️ I guess in principal it SHOULD work, have you ever tried that? Just the roller by itself. 🤔
Hello Lawn Daddy, I have been stripping my lawn for years 30 or more, I always had toro lawn mower and the flap in the back, like yours I put on a heavy pipe at the bottom, work great and lasted until toro came out with the stripper attachment, so that was pretty much free, the pipe was just lying around in the garage, always gave me that extra edge, my first time saying it, now my secret is out.
i just made one of these on the weekend. I made mine mounting the eye bolt to the roller body and also at the back of the mower deck. Then connected the two eye bolts using a carabiner. Works great and easily removable in two seconds. My roller doesnt spin however like yours but it works great.
It was the end of winter when I built it so I couldn't use it in this video...check out my video "5 Lawn tools you can build" to see it in action. Thx for watching.
Ya I'm gonna be making a video for next week and how all my DIY tools work...I used my striper last weekend and it works awesome...stayed tuned and thanks for the comment.
I want to build one of these but I think my problem is when I have to cut along the fence but worst case I have to use the weed eater for that. What we won't do to have a nice lawn!!
@@trevor-bd4kt yes I can see it working with gravel, but you had mentioned sand, and I would think that would eventually leak out, even with silicone I would think that would wear away rather quickly also....So gravel is probably the best bet..
Love this idea nice work. I have the same old model toro recycler like you have. If you find your rear wheel plastic cogs are stripped, look to find a aftermarket all metal to metal mesh cog and pinon gear. Made my hand me down mower drive the new. I also wanted to ask how is this having to pivot? 50% of my mowing requires to pivot off a wall and it's annoying... Wondering how this modification would handle the abuse and if it would get in the way. Cheers from the Chicago suburbs.
Pivoting is ok, standard turning around is smooth but up against landscaping bricks is less smooth...striper works great though, I actually took the flap right off and used the flap holes and bolted L brackets right to the frame...much stronger now.
Awesome, glad it worked out well for ya. If you go on my channel and click on the about tab, you can click on the Instagram link and direct message me.
Love your stripping build my hubby built me one the other day working ok just not heavy enough. Showing him this video. Would show a picture but not sure how on here
@@TheLawnDaddy He used a heavy gas pipe inside a pvc pipe with a threaded rod. My pvc pipe is only 3 in I think. I showed him this video think he is going to make me one.
I built this roller is the late winter so I couldn't show the results in this video...but I did show the roller in action in my video "5 lawn tools you can build" check it out and I hope you find it useful.
Thx for watching man, love you took time out of your day to comment that the video starts at 4:17...watch time is watch time bro! This video was so fun to make.
Good question, no you don't have to adjust the striper. The brackets have soom play plus the diameter of the striper is big enough to compensate for the height adjustment.
You want a store bought version than buy 1 yourself, my video was to show the average home owner how to build one themselves at a very affordable price.
If you guys wanna stop complaining, i build the roller at the end of winter so couldnt show it work. You can watch the roller work in the video 5 tools you can build.
No, I didn't show it in the video but I glued the end caps on so the whole.thing rolls together. I show it being used in my video called 5 Lawn Tools you can build.
If you want to see how well this Amazing DIY Lawn Stripe kit works, go and check out my video called "5 LAWN TOOLS YOU CAN BUILD" to see it in action!!
Thanks, great build! Go Bills! from an old fan from the days of Jack Kemp & "Golden Wheels" Elbert Dubenion
Thanks for the information about to make my lawn stripper, Go Bill's, Rochester N. Y.
Why didn’t you show how it actually making strips?? Didn’t see it in use while mowing so how do I know this actually works?
@michaelklinger395 I built it in February so the temp was 45 degrees out. Watch my video called 5 tools you can build...I show it working in that video
Im a 13 year old and i cut lawns so i made this it realy helps and customers realy like the way it turns out today i made 200 bucks
Awesome man, good job. Glad my video helped. Proud CZcams right now.
Awesome stuff. I have just made this last night and a couple of things:
1. I put my roller length to the centre line of the wheels after originally NOT listening to this video recommendation and put the pipe longer than the wheels. The result was an awful lawn stripe as there was a cancellation effect from the return pass as the pipe had already half folded the grass. Had to take it all apart, cut the pipe and reassemble everything.
2. Add a 40mm x 4mm thick flat bar to the the return bracket that receives the eye bolts from the roller to stiffen it up.
Cut the grass with it on last night and it works great. Far better than other rollers out there that use carabenas to hook in to the mower meaning you can't reverse.
My lawn "striper" is simply to cut my lawn 10am. Early enough to still be moist but dry enough to not clump mulching. The stripes looks pass my teenage daughter's approval. "Dad, you got better."
Someday, I will make a proper striper, someday.
😆
I just made a lawn striper for my tractor Using the frame of a spiked aerator That I haven’t used in forever. I replaced the spikes with 3 inch PVC , utilized the shaft from the aerator and will be filling the pipe with pea gravel. I’ll be trying it out for the first time this weekend
Just finished making mine. While every mower may be different my changes were as follows.
>10" L bracket (all items from hd)
>Same ideas for opening holes, note that the top hole and the first or closest to the L were what needed to be opened up.
>noted for my 22" toro I ended up not using the frame I opted for use of the two large bolts on the handle. I work on these tools at work. So cost of replacement bolts and the large nuts are about 10 bucks tops if it messes up in use.
> the brackets take some getting use to. However the results were def a win.
> I also note that in my case I had to modify my pipe itself to 22 inches or so as the end caps added to a point I could attach my steel pipe endcaps.
In construction of project my pipe threads got messed up. By trip three to home depot because I messed up and grabbed 3" end caps and the pipe thread being messed up i only paid once for my steel pipe. But all worked out. I had to cut the pvc to 22 inches as the end caps add a little more length to overall construction.
End all beat all though it works well. I can see the stripes even at night so I can't wait to see what it looks like tomorrow morning in the sun.
Ya I was pretty excited when I saw how well the stripe kit worked, super easy to build too.
Let’s see the strips
Best one I’ve seen so far.
LD many thanks I just completed a lawn roller yesterday, but it was wonky, your application solves the backing up issue. 👏🏻🏆
Best DIY design I have seen so far! I like that it doesn’t require drilling holes into the body or the flap of your lawn mower. I also like the larger 4” diameter roller, just like the expensive ones 😊
Thx man, I used the roller for the first time and was blown away with excitment...sub to the channel to see the results in an upcoming video.
I’ll look forward to seeing that. I subbed when I saw your lawn level video earlier this evening, also liked the above ground water system. All great DIY designs!
@@TheLawnDaddy I agree, best DIY design. Quick question, can you still attach the rear bag with the roller on? I’m looking to do this but I need to pick up the grass clippings. Thanks in advance 🤙🏽🤙🏽🤙🏽
Thx, glad you like the design. To answer your question, yes you can attach the bag and use the roller. Instead of bagging, have you considered side discharging? It's better for your lawn especially if you have fertilized...if your grass is long you can always double cut to avoid long clippings sitting on top and dying off.
@@TheLawnDaddy cool man! Thanks for the reply. On my property I mulch it but I do a few neighbors and they want it bagged. So hopefully once I got one made and gonna stripe a few of them to Surprise them to see what they say. I was considering just rolling the grass after it was cut WITHOUT the lawnmower to be able to make them easier as something it’s awkward to cut straight lines when they the lawn curves and retaining walls everywhere 🤦🏻♂️ I guess in principal it SHOULD work, have you ever tried that? Just the roller by itself. 🤔
Hello Lawn Daddy, I have been stripping my lawn for years 30 or more, I always had toro lawn mower and the flap in the back, like yours I put on a heavy pipe at the bottom, work great and lasted until toro came out with the stripper attachment, so that was pretty much free, the pipe was just lying around in the garage, always gave me that extra edge, my first time saying it, now my secret is out.
I think this is my favourite DIY lawn Stiper. Thanks!
Thanks so much!! Check out my video called 5 Lawn Tools you can Build to see the stripe kit in action.
i just made one of these on the weekend. I made mine mounting the eye bolt to the roller body and also at the back of the mower deck. Then connected the two eye bolts using a carabiner. Works great and easily removable in two seconds. My roller doesnt spin however like yours but it works great.
Those of us with zoysia lawns usually keep them fairly short, and due to the grass’ tendency to stand up straight, striping isn’t that noticeable.
Thanks for sharing I have been trying to figure out how to make one. Very helpful.
Great build will be making mine this spring… GO BILLS…
Heck ya Go Bills, the roller works awesome.
Nice thank you very much 😊 for sharing your time and making this video very Awesome I will make one for my Mower
Nice work. Similar build to mine. Used scraps from a job of mine (4” sch 80, unistrut, threaded rod), just had to buy hardware.
I will thank you
Mr. Build-it with another good one! Now if only that bermuda would lay down nice stripes!
Great job, GO BILLS! 👍🏈🏆
Good video. Haven't seen anyone build it this way. Going to have to modify mine this way.
Nice build. Also you had a great pace on your delivery of the instructions. Great Job!
Thanks
Can I still bag my grass if I make 1 of these Lawn Stripe. Thanks. 🙏
Yes, you can still attach the bag.
Homemade can be so satisfying.
Doesn’t the end caps leave additional lines? Wouldn’t interior caps work better?
They don't leave additional lines.
This looks super simple…thanks for the tips
I like it will build one this year, and Go Bills !!!👍
I love it want to do my lawn just like this and you make it look so easy
Thx for watching
I wanted to see it in action. good video
It was the end of winter when I built it so I couldn't use it in this video...check out my video "5 Lawn tools you can build" to see it in action. Thx for watching.
I think it did good on the driveway 💁
So ready to do this. Probably this weekend
Yeah BUT, there are lots of restrictions/obstacles in my yard therefore I’ll need more engineering before attempting.
Thanks for many good ideas.
NIce job! Looks like you can even backup with the roller attached!
I hope that you put the video out soon on how the lawn looked using this striper. Great video.
Ya I'm gonna be making a video for next week and how all my DIY tools work...I used my striper last weekend and it works awesome...stayed tuned and thanks for the comment.
Hey Gary, check out the community tab on my youTube page, I just put up a pic of my lawn after using the striping kit.
@@TheLawnDaddy Looks great. Thanks!
The background music kills the video. Sounds like someone is watching TV in the other room.
Awesome!! Lets Go Buffalo!!!
SO what Happens if you dont want to Unbolt the Lawn Roller to put the Catcher On, Now Way I doing that to Pull a Catcher on and Off.
Awesome video Sir! Let’s go Bills!
I want to build one of these but I think my problem is when I have to cut along the fence but worst case I have to use the weed eater for that.
What we won't do to have a nice lawn!!
Great video man!! You earned a new subscriber.... Keep up the great work!
Go Bills! ( unless they play the Eagles ; ) ...
Is it me or is your roller wider than your wheel base? I like the design though.
It might be slightly bigger, the end caps prob made it a lil wider.
Good design. I need to go look at my EGO and see if there's any way that would work on it. Thanks for sharing.
Clever..............great job.
I would use 1/4-3/8" pea gravel or sand. This is genius idea!!
Thx
@ trevor5534....How would you keep the sand from coming out the holes where the threaded pipe goes through?
I used silicone
@@markoakley4343 I built one and used small gravel. Worked great! No leaking out.
@@trevor-bd4kt yes I can see it working with gravel, but you had mentioned sand, and I would think that would eventually leak out, even with silicone I would think that would wear away rather quickly also....So gravel is probably the best bet..
Best DIY kit Ive seen. Thanks!
I noticed you didn’t show turning the lawnmower .
Watch my video 5 diy lawn tools you can build, it shows me using it.
Will the grass caughter still fit on the mower
I think it does yes.
the shimmy at 9:06 lol. awsome video, i will try this out.
Thx, ive got a more recent video of the kit in action.
Just made one of these....go bills
JA17
Let’s see the end product your strip’s? I like it because you can go backwards thanks for sharing 😊
Thx, I build this in the winter so couldn't use it in this video, check out my 5 lawn tools you can build video...I show it in action there.
I saw the video looking good did not understand why it was on a different video? You have your reason do not need to know thank for the tip.
thanks for the vid, will be building this soon. Can you include a video of what your lawn looked like after using it?
I am making a video as we speak, should be out in a few days. Check out my community tab on my channel, I just posted a pic using it today.
Oh snap, 716 in the house!!! I subscribed on the helmet aline, lets go Buffalo
Awesome, I'm not from Buffalo though, I'm from Canada but I'm a 41 yr old Bills fan for life.
Wow!! Now that's pretty cool!!
Heck yeah that is badass ...I'm building one.
Watch my video called 4 Tools you can build to see it in action. Thx for watching.
How many inches are the L brackets
Not sure the exact length, they were a pretty standard L bracket at home depot. I ended up cutting them after I installed them.
Results would be kinda important.
I built this in February during the winter...I posted a video called 5 lawn tools you can build, I show the results in that video.
Great info,,,Go Bills!
Very creative, definitely taking idea
instead of gravel or sand to add weight , i use feathers
Nice, bet those stripes stand out like your humorous comment...your gonna need a lot of feathers bud.
I love this video it was very helpful
Nice Post; Thanks That pipe could be filled too...
Love this idea nice work. I have the same old model toro recycler like you have. If you find your rear wheel plastic cogs are stripped, look to find a aftermarket all metal to metal mesh cog and pinon gear. Made my hand me down mower drive the new. I also wanted to ask how is this having to pivot? 50% of my mowing requires to pivot off a wall and it's annoying... Wondering how this modification would handle the abuse and if it would get in the way. Cheers from the Chicago suburbs.
Pivoting is ok, standard turning around is smooth but up against landscaping bricks is less smooth...striper works great though, I actually took the flap right off and used the flap holes and bolted L brackets right to the frame...much stronger now.
How does this effect turning around? Would you want something to lift it up on the turn?
There is a little resistance when turning around but not as much as you would think.
L brackets… how tight did you tighten The screw for the L bracket? Looks like the L bracket swivels .. wouldn’t The screw loosen up and fall out?
Another great how to video 👍
I made just like this... awesome result... if you have any place I can send you picture and a short video... cheers..
Awesome, glad it worked out well for ya. If you go on my channel and click on the about tab, you can click on the Instagram link and direct message me.
Love your stripping build my hubby built me one the other day working ok just not heavy enough. Showing him this video. Would show a picture but not sure how on here
Did you use a 3" pipe or a 4" pipe? Once I filled mine with gravel, I also poured sand into it to make it heavier...noticable difference.
@@TheLawnDaddy He used a heavy gas pipe inside a pvc pipe with a threaded rod. My pvc pipe is only 3 in I think. I showed him this video think he is going to make me one.
I enjoyed!
Nice work man.
Can i use bag with this tool ?
Thank you! I’ll have to give it a try!
Check out my video 5 Lawn tools you can build to see it in action...it works awesome.
Awesome video man. I am doing this. Great work!!
Nice post thank you. Go bills 👍
I took two bricks 🧱 wedged under deck and lay on the flap
Can you still put your bagger on to bag the grass while striping it?
Doesn't look like it.
No, there won't be enough room
What 4 inch pvc pipe did you use cause I bought some 4 inch end caps and didn’t fit. It’ was PVC S&D Cap, 4 in.
I went to home depot or Lowes and bought what they had, not sure why the end caps you bought didn't fit.
What size is the L bracket you used?
It's a standard size, I bought it at home depot.
TY for the great, inexpensive lawn roller video. Sub'd. Peace out...:)
Bills Mafia appreciate your help
What happens when you mow close to a fence? The Roller is wider than the deck
You get it as close as you can, I have a video showing it in use...its called "5 Lawn Tools YOU can build".
GO BILLS
Can you show the results from this project please?
I built this roller is the late winter so I couldn't show the results in this video...but I did show the roller in action in my video "5 lawn tools you can build" check it out and I hope you find it useful.
@@TheLawnDaddy thanks- if I would have read a little more I would have noticed that in the comments…. Thanks!
So if you remove the rear flap, do you get more discharge of debris?
No not really, always gonna get a little bit.
GO BILLS.
Nice job, I like it. 👍
Video starts at 4:17
Thx for watching man, love you took time out of your day to comment that the video starts at 4:17...watch time is watch time bro! This video was so fun to make.
Let's go, Buffalo !
Heck ya
do you have to readjust the striper every time you adjust the height you're cutting at
Good question, no you don't have to adjust the striper. The brackets have soom play plus the diameter of the striper is big enough to compensate for the height adjustment.
Good job!
go bills!
How about showing a before and after or show a store bought version and what you made so we can visualize the difference between the two
That would make too much sense,
You want a store bought version than buy 1 yourself, my video was to show the average home owner how to build one themselves at a very affordable price.
If you guys wanna stop complaining, i build the roller at the end of winter so couldnt show it work. You can watch the roller work in the video 5 tools you can build.
Won't the pvc pipe get scuffed on the sidewalk between grass?
Go Bills!!!
Heck ya...BILLSMAFIA
Thanks for the tips!
Love it
Could something like these be attached to a riding mower?
Im sure they could, just need to mount differently.
Great idea AMIGO!!! Regards from México 🇲🇽
Wouldn't the end caps being higher than the pipe cause problems? Do you have a video of using this so we can see how it works?
No, I didn't show it in the video but I glued the end caps on so the whole.thing rolls together. I show it being used in my video called 5 Lawn Tools you can build.
This DIY striper looks very familiar 🤔
Better than your he can back up
AADD and not a finished video without showing it working.
I show it working in my video 5 Lawn Tools you can build.
LETS GO BUFFALO
#BillsMafia