So You Own A…STIHL FS 40 C Trimmer

#STIHL #Trimmer #FS40C #CarlsMowerAndSaw
So you were looking for a light, maneuverable, easy-to-start curved shaft trimmer, and you landed on the STIHL FS 40 C. Congratulations!
We want to help you make sure you get the most out of your new trimmer for years to come, so we’re walking through the basics of fueling, starting it up, changing the air filter, and, of course, reloading the trimmer head.
Have questions? Drop a comment, give us a call at 360-384-0799 or email [e-mail].
Don’t forget when you have the choice, support your local power equipment dealer. They go above and beyond to make sure you’re the priority.
------------------
◼️ SUBSCRIBE to Carl's Mower & Saw 👉 tinyurl.com/9uywpvjv
After many years in the industry, Carl Levien decided it was time to go out on his own. The day came, April 1, 1990, when Carl and Beth Levien officially opened Carl’s Mower & Saw. With a clear goal to provide a higher level of service to Whatcom County, they opened their doors and started building a loyal following of customers. They discovered customers were refreshed by the quality of service available to them. Over the past 30 years we have continued to refine our services and provide the top equipment in the industry.
📞 360-384-0799 / 📧 [e-mail]
Have questions? Drop a comment!
------------------
For more handy tips, follow our socials...
◼️ INSTAGRAM: tinyurl.com/mhjcr8md
◼️ FACEBOOK: tinyurl.com/unaenncp
------------------
◼️ WANT MORE TIPS? SEE OUR BLOG: tinyurl.com/9abjks9r

[@IamJSims]

Very well articulated and organized. Thank you and good job good sir.
I wasn't entirely sure if the line had to be cut in half and fed in each side like my last Craftsman trimmer. Liking this one a lot already.

[@carlsmowerandsaw]

You are welcome. Thanks for the positive feedback and for subscribing to our channel

[@garethtcollins]

That was just what i needed. Well presented, thank you

[@carlsmowerandsaw]

Glad it was helpful!

[@mikedawson1734]

What a fantastic detailed review - one of the best, many thanks!

[@carlsmowerandsaw]

Glad you liked it! And thanks for supporting our channel.

[@BKD1966]

Good Info. Thanks

[@carlsmowerandsaw]

Glad it was helpful!

[@QUERCUS5555]

Really helpful, thanks Josh.

[@carlsmowerandsaw]

Glad it was helpful!

[@lpdb1995]

Is there a trick to pulling thing out I got a used one and can't reload it to save my f'ing life.....

[@carlsmowerandsaw]

Should go pretty easy unless there is a bunch of buildup of debris, which does happen from time to time. Loosen the center cap the knob itself, then twist the middle part counterclockwise sometimes that’s all you have to do to get that to pop loose

[@betsylopez6587]

Great video! Question, is it possible to use the edger attachment on this model?

[@carlsmowerandsaw]

Unfortunately not

[@bonniemoyers2577]

The line keeps getting tangled inside for me, what am I doing wrong?

[@carlsmowerandsaw]

Old line, poor quality line, or not tapping enough. More taps are better than less.

[@jaysonnetemeyer8177]

Does the fs40c string the same

[@carlsmowerandsaw]

Depends on head that is installed. More than likely yes.

[@chucklong7402]

Can u use 40;1 ready mix fuel in it?

[@carlsmowerandsaw]

@@chucklong7402 you can but why would you?

[@patriotdarktolight1780]

speed feed head for FS40 ?

[@carlsmowerandsaw]

Nope, that is not an option to put on a speed feed.

[@QUERCUS5555]

Really helpful, thanks Josh!