How to Replace Turn Signal Combination Lever 1999-2006 Chevrolet Silverado 1500
Vložit
- čas přidán 7. 09. 2024
- Buy Now!
New Turn Signal Combination Lever from 1AAuto.com 1aau.to/ib/1AZC...
This video shows you how to install a new turn signal combination lever from TRQ on your 1999-2006 Chevrolet Silverado 1500.
This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Pocket Screwdriver
• 8mm Wrench 1aau.to/oib/1AX...
• 4mm Socket
• 7mm Socket 1aau.to/obgC/1A...
• Side Cutters
• E6 Inverted Torx Socket
• T25 Torx Driver 1aau.to/oEv/1AX...
• T25 Torx Socket 1aau.to/oEv/1AX...
• Ratchet 1aau.to/obFS/1A...
• Electrical Tape
• Gloves 1aau.to/oaha/1A...
• Safety Glasses 1aau.to/o96/1AX...
• Wire Ties
• Pick 1aau.to/oRx/1AX...
• Utility Knife 1aau.to/ofQ/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for the detailed explanation of how to get to that plug!!! There are a lot of short videos that don’t cover how to actually reach that plug. someone has been behind the dash on my truck before (it’s 2001 and i have only had it 5 years), as most of the screws you showed are gone, as well as the plastic hooks at the bottom on the steering wheel cover.
+@nmartin5551 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thank you. Just replaced mine. Wasn’t too bad thanks to your video
I did not understand why the original black electrical tape had to be cut back to separate the wiring harness to apparently reconfigure the wire orientation? Is it because the wire plugs in in different places in the new multi switch compared to the old one? It was not really explained why the wires needed to be separated out like that and reposition on the wire harness? Someone tell me what I missed please?. Otherwise I understood the rest.
Thanks for sharing this video 👍🏼
Awesome
I got a new multi function switch installed but its still not working only my wipers will work
Any way of just bypassing the flasher light switch? Cut wires or something? My red hazard light button broke. So it won't stop flashing. If I take the fuse out the brake lights won't work. I try to just hold the button down yet it's VERY easy to make the lights go crazy while holding it down with finger etc. =( great video btw!
I have a 2001 Silverado and I’m want to add cruise control. I bought the combination lever with cruise control. Which wire/color is the cruise control wire? Thanks
Thanks for the help
My 05 GMC Has a upper steering shaft adjustment on top of this switch, didn't see it on this one. Anyway if yours has it Don't over tighten it Just take the play out. Just snug it up. worked for me
9:56
No Eric today!?