TAMIYA CR-01 TOYOTA LAND CRUISER 40 CUSTOM SHORT WHEEL BASE
Vložit
- čas přidán 13. 09. 2013
- This is my TAMIYA CR-01 TOYOTA LAND CRUISER 40.
modified the wheel base shorter to 260mm from 285mm stock.
the shortened arm shaft is from aluminum pipe.
and other ...( refer to last of this video )
Other modifications
the spring is shorter type from "tamiya CR-01 Barrel Spring Set( short ) 54085"
and black painting it.
the steering shaft covered it by aluminum pipe( 5mm : hole 3mm) for privent bend when hit , and painted it.
tyre and wheel is 1.55 type from RC4wd.
this gunmetal colord alminum bumper stay form "KM-Racing"( probably chinese maker?? )
painted body color from surface side for matting color.
put lenz stickers for more realistic texture.
and other Tamiya option parts.
motor : 35T Brush Tamiya CR Tuned.
battery:7.2V NiMH.
camera : HDR XR520V , GoProHERO2.
撮影場所 奥多摩海沢園地、市原笠森 - Auta a dopravní prostředky
Thank you very much!!
I'm very glad about this many nice comments!
Great Video! Very nice locations, perfect camera angles! And also you did a great job in modifying the CR-01! Thumbs up!
WOW....everything about the whole video is PURE AWESOME!!
Simple, elegant, detailed, awesome scenery, day and night scene and nice accessories.
Thank you very much for nice commenting!!
im glad you to say so.
Thank you very much for your many nice words!!
I am very happy to have you say that.
This time, I intended to make CR-01 look like a scale model style more.
best regards!
昔先輩に「川渡りに行くぞ!!」って言われて乗せられた車がこんな感じの40だったな。素晴らしい作品ありがとうございました
WOW! Pro-Work, definitely!
What a wonderful video with a perfect picture composition and underlying music.
AND then, the Cruiser: Just awesome!
What a nice choice of everything: paint scheme (love it!), lower axles, cargo details, driver ...
Also from my side, all thumbs up !
Thanks for sharing & best regards!
Thank you very much!!
I had a hard and fun work to this modifications.
Thank you very much for your many nice words!!
Every day found a new video from you, is a good day! 10 thumbs up from me! Absolutely stunning video! Music and images fits perfect, and the camera work is excellent! And the mods on the CR-01 are brilliant! Best looking CR-01! Thank you for sharing this! Best regards from Switzerland!
Wow! First you built a wonderfully realistic-looking truck, then you went out an shot a beautiful video! I liked the shots of the surroundings and the clear evidence of lots of thought having gone into camera positioning etc. Thumbs up : )
Nice work - Great looking CR01 - Wheelbase is a much better fit now. Interior design is simple and looks great !, well done.
Thank you very much!!
I am happy about your comments.
Cool, love the night shots at the end :)
It was absolutely worth the hard work!
Looks great!
Great vid awesome mods!
Nice proportion.... Great film.. Producer class!!
Thank you very much!!
Nice job ! I like the song very much too.
Thank you so much sir! that' a big help. Thank you for sharing! please post more videos of your truck.
Thank you very much!!
Around waterfall is in "Okutama" forest.
You probably know too.
thanks a lot sir! I started working on my CRO1. I'll do my best to make it look good, just like yours. Thank you!
Thank you very much!! for watching my videos.
Thumbs up! Amazing as always my friend.
Wow Great vid an an AWESOME truck
Thank you for watching my video!!
ありがとうございます!!
いえいえ、Bajaエンジンやこの40といい、こうして接点が見つかることが嬉しく思います。
やはり実車のメカにも携わっていた方でしたか!刺激的なお仕事をされていたんですねぇ。
Thank you so much!!
Thank you very much!!
Thank you!! my friend!!
コメントありがとうございます!
へぇ、それいいですね。私は実車は乗ったこともなくて想像の中だけです。(^_^;)
楽しんでもらえたようで良かったです。
ありがとうございます!
CR-01を少しでもスケール風にしたらどうかなと思ってやってみました。
Perfect!
Hi!
I added a URL in description that is photographs to explain about custom link.
amazing work man :D
Many Thanks!! (^___^)
Thank you very much for Big thumbUP from you!!
I am thinking to make roll bar from brass tube for open body LandCruiser in reference to your LandCruiser making video.
It's time to buy Gas Torch...I have not used it ever.
Another excellent video :)
Just Me Thank you!!
Thank you very much!!
Please wait for a while for preparing to explain to you....
Thank you for watching my video!!
Other modifications is a little. Just now added about others in description.
Yes, the battery is in original position.
Yes, Wheels and tyres is 1.55.
Thank you very much !!
Oh! yes... I am going to watch your video ....
Nice ランクル
自分の好きなイジリ方ですよ。
Nice movies & Good idea!!
Thanks! (^◡^)
My comment is the same as @Matteomeier! absolutley excellent video (and model)!
Lovly vid
そうでしたか・・こんど私も試してみます。
ok sir, thanks in advance.
Thank you very much for watching!!
Very nice looks good
Thanks for nice commenting!!
コメントありがとうございます!
あなの動画観させていただきます。
This is a Tamiya commercial? Thats art work in RC video!
Thank you!! This is only for my hobby. (^__^)
Thank you very much!!
when night filming, i fell down to the behind. ( *o*;)
いろいろと質問ばかりでスミマセン!ありがとうございます。低速トルクがなくてかなぁ?っと思ってました。
That length is 20mm.
It is 6mm Adjuster from Tamiya spare parts ( maybe...#50953) that I bought.
however, It is same as from stock.
このハンドルは、たまたま買って持ってた、タミヤのオプションパーツの「 タミヤ オフロードカー ドライバー人形 」に付属していたハンドルを使用しました。軸はプラ丸棒を挿しています。
はじめはプラ丸棒を曲げて作ろうかとも思いましたがまんまるいのは難しそうでやめました。
Really good-looking CR-01! What about other mechanical modifications? The battery is in the original position? Are those wheels 1.55?
どういたしまして。
RC4WDのホイールはピンタイプと六角ハブタイプがあるようですが、私は六角ハブタイプを買いました。
CR-01、CC-01ともに問題無く付きました。
ハブ穴の深さはタミヤと同じ5mmです。
この動画のホイールは1.55インチで直径45mm、タイヤをつけたときのホイール幅が22mmです。
CC01にCRチューンモーター付けたらフロントのスパー?あたりから異音しました。ノーマルでは異音しませんでした。
お久しぶりです。この間は色々と教えていただき ありがとうございました。 モーターは540で充分ですね。 アップはやり方が・・・ 最近は友達のCR01と遊んでます。ちなみにRC4WDのホイールは普通に付きますか?
Hi sir! nice CR-O1. I'm also planning to build my truck to make it look scale. just want to ask, what is the size/diameter of the aluminum you used on your custom link? and what is length to fit in the wheel base of the cro1? Thank you sir! you're truck is awesome. I like it!
岩場で走らせて 15分ぐらいすると動きが止まるのはESCがダメなんですか?あと、ある程度走らせて負担がかかると動きが少し止まります。使用してるのはサンワのセットのESCです。
Gostei, muito bom!
Boa tarde, Obrigado por ver!! de Japão.
いやぁ、やはり洗脳動画ですなぁ〜笑
念願叶ってワイルドウイリーを先週購入して付属のギア18Tを23Tにして爆走させてるんですが、超楽しいですね!
今度はCR01のようなクローリング出来るような車が欲しいなと思ってるんですが、次の給料日ですな…笑
買うとしたら、もちろんランクルです!このような落ち着きなあるカラーリングにしたいですなぁ〜
どうぞ洗脳されて下さい(^__^;) 同志が増えるのはうれしいです。
新車購入おめでとうございます!ピニオン23T付けられるんですか?加工されたとか?
このランクルは艶消しにしたかったので外側からスプレーしました。
BuoyEngine スクエアという会社から発売されているワイルドウイリー2用ハイスピードギアセット(23T)というのを秋葉原のラジコン店で1,000円で購入して付属のギアと交換しました!全部で3つのギアが入ってて、加工無しで取り付けられるようになってます。23Tの他に25T用もあります! トルクチューンモーターを積んでいるんですが、このギアのおかげで恐ろしいほど速くなりました(^o^)
現在ワイルドウイリーのボディを俺流塗装中です(笑)
ああ!そういえば以前それらしいものを秋葉原で見たような・・・
無加工は魅力的ですね~
Nice car and video! I like a lot the the color scheme of the car: could you please tell me the references of the paint you used and of the accessories?
Thx
Thank you !!ありがとう
This is the same as body which you would gave previous comment to my video.
CC一01 買いましたよ。40ランクルです。
やっぱ1.55もいい感じですね。パーツはどこで買ってるんですか? 深すのも大変です。
そうなんですか。ホイール幅も5センチぐらいあります?
Hi again sir, can send me the length of your rod end? because Im planning to use to stock rod end of my CRO1. Thank you so much sir!
店頭では難しいので、ネットで買いました。「yss crawlers」です。「楽天スポーツホビー」もあります。
でもいつも売り切れますけど。他は私もよく知りません。
Sir, did your mods and my cr01 looks great! Only problem is, it doesn't seem to run smoothly due to the shortened rear propeller shaft. How did you lower your kit? As thats seems to be the only fix
Thanks!
my shortened propeller shaft is from stock parts. only I cut it by saw.
the lowered chassis is by short spring set for CR-01 from tamiya parts.
Am I answering your question correctly?
BuoyEngine i see. Are these the barrel springs? Do you have a link or product code for the springs?
Yes, that springs are from TAMIYA barrel springs set ( short ) No.54085.
I painted it with Black.
BuoyEngine awesome! Thank you!
bom vídeo. tenho uma questão eu tenho um axial scx10 e gostava de saber se daria para aumentar ate aos 300mm ou se daria para por mais. obrigado
filipacampos19683 Obrigado ver meu animação ありがとう!(^__^)desculpa não fui capaz de traduzi-loportuguês japanese. (~__~)
そうでしたかっ! 撮影してアップすると楽しいですよーー
i Like!!!!!
Good sir. need help on my Cr01. im having a hard time with the wheelbase to fit the Landcruiser 40 Body. what is the length of your Rear Links? Thank you
svt rocker I have some pictures about my landcruiser and uploaded one. refer to my google plus page. you can see about infomation of wheelbase and other. BuoyEngine
Nice Car (Y)
+DazMonkey Rc Thanks !! (^u^)
Passt die Karo vielleicht auch auf ein Axial SCX 10 ?
hi there! can you send me a photo of the parte you modified??? rgds
Hi, thanks for watching!! (^◡^)
this chassis already not exist here. but found some photos in PC.
just now. I upload some photos on shared folder and put a link of one on "description" of this video. would you watch that one.
What paint brand, color did you use for the body?
This color is from TAMIYA color splay.I put if from surface for matt. first rayer is "Black"( PS-5 ), and next is "Wooden deck tan" ( TS-68 ).
ola como vc fez para que ela ficasse baixa?
sorry,, I could not translate your words to Japanese.
ハンドルは自作ですか? もしそうなら何で作ってますか?
Thank you!! ( ^__^ )
どうなんでしょ?結構みなさんターン数高いモーター付けてますよね。自分のだけダメだったのか!35Tは手で回しても重い感じがしました。
情報ありがとうございます。でもどうしてでしょうねぇ。ピニオン16だとトルクが強すぎなのかな。
my friend..how did you eleminate the torque twist while shortened the wheelbase?
especially, I have not been measuring for it. ( is your questions means to the chassis rolling when moment to accelerating ? )
yeah it is sir...when you accelarate the front right of the chassis will come up and the rear left side of it will dropping..
what linkage did are you using by the way?
I am using 6mm adjuster and 5mm diameter aluminum pipe.
I have uploading some photos on shared site about this modifications.
probably you can see this.
↓↓↓
drive.google.com/folderview?id=0B6ej4PDm_2VJcXotS0NhXzlTMk0&usp=sharing
Oh, by the way , It is maybe ... unrelated with this rolling problem ...
I did measures to prevent the suspensions wobble.
there is big wobble at Link mount, then I bound it by clamping band.
(you can see this in my photos)
+BuoyEngine thanks mate.... so your still using the cantilever...i remove mine...hehe..ill try to do your thing this weekend... many thanks again sir...
ケイタイでは見れないですか?
いいですね、 私もハイリフトトンドラとlandroverのcc01をもっています。 私のトンドラは非常に改造されています。モータを前に移動し、車の中にseatsとdashboardをつけました。お時間あればみてみてください。 よろしくお願いします
そちらのフリートークの方にコメントしました。
フリートークってどこで見るか分からないです・・・
Great car and video my friend - looks like the brother of my CR-01 Landcruiser ! ;-) I think we had exactly the same idea. I really like the Interior that you built. If you like, take a look at my video too...
何の変化あなたは、Q crの滞在の低速に作ったのですか?
I still not get it... ( ^__^; )
↓ this link is details of my modifications.
drive.google.com/open?id=0B6ej4PDm_2VJcXotS0NhXzlTMk0
ピニオン20にしたら異音しなくなりましたよ。
iPhoneでは見られますがケイタイはわかりません。
------------
私もサンワのを使っていたとき止まることがありました。でも水が入って死んでしまったので理由はわかりませんでした。私のは2時間に1回くらいか、全く止まらない日もありました。 7.2V NiMHでした。
------------
タイヤとホイールサイズを教えて下さい
1.55インチです。
ホイール、RC4WD Stamped Steel 1.55
タイヤ、RC4WD Mickey Thompson 1.55
@@BuoyEngine 有難うございます 頑張って挑戦します
ウインドウ右上の自分の名前をクリックして「マイチャンネル」をクリック、
そして中央付近の「フリートーク」をクリック。
どのようにして撮っておられるのか、興味が尽きません。
カメラ用の一脚の先端にカメラを取り付けてこれを右手で持ってラジコンを追いかけてます。ラジコンは左手だけで操作しています。
二種類のカメラを使ってます。SonyのハンディーカムとGoPro hero2です。
車載カメラの場合はGoProをラジコンに取り付けています。
czcams.com/video/tcgWqAlJJqI/video.html の始めの方に使っているカメラを映してます。
Thank you very much!!