Proto25 | Tiny King of the Hill | Sub250 Micro Long Range Ripper | Premium 2.5" FPV Drone Frame
Vložit
- čas přidán 1. 07. 2024
- SHOP PROTO25 www.protofpv.com
www.protofpv.com/product-page...
GOGGLE DVR
• GOGGLE DVR - Tiny King...
OTHER VIDEOS:
Why Proto25 | Build Video
• How to Build PROTO25 |...
Proto25 Mountain Ripping Promo Cinematic
• PROTO25 | Micro Long R...
Proto25 Urban Jungle Exploration Promo Cinematic
• PROTO25 | Micro Urban ...
Proto25 Cinematic and Freestyle Review by DopeyFPV
• Proto25 Maiden Day | F...
Proto25 Freestyle at Zombieland by DopeyFPV
• PROTO25 rips where a 5...
Proto25 Review by JonFloFPV
• Why I Really Like this...
How to Mod All Antenna on Goggles Integra
• HOW TO MOD ALL ANTENNA...
CUSTOMER BUILDS:
www.protofpv.com/portfolio-co...
Special thanks to all my subscribers, Sponsors, and ProtoFPV customers and pilots!
Also @kibbycabbit & @JonFloFPV for being my best FPV buddies.
Without you guys none of this would be possible!
#drone #fpv #fpvdrone #fpvaddiction #longrange #cinematic #flying #jazz - Zábava
Lighting a joint and watching the fly over is a vibe tbh
lol!! 😂
I’m so jealous of the terrain you get to fly. Flat and boring around here, I need to start traveling with m P25… and my Pg5!
Yes! To get here it’s about a 2 hr drive, and there’s a bit of a rugged road. Best to have an suv. . I’m sure you can find some nice cliff sides!
So nice to see such a small quad doing this.
Amazing 🤩
For sure man! Thank you for watching!!
Amazing !! 👍👍👌
that. was. AWESOME!!!
Hahahah yay!!
tiny quad with big battery looks funny. awesome flight i like the sounds and music
Haha thanks man! yeah its silly for sure and I love it. it can also take smaller batteries to look normal and it freestyles very well with smaller batteries
That sound of running water 😂
No wonder I had the urge to pee so many times editing this video!
i guess i need one now!!
Looking forward to it!!
The greatest frame designer !
Ahhaa too nice man. No way!! Hahahaha
I 2nd that favor
Very Nice Patrick!
Thank you John!
Man that Lil thing rips Long range 😮😮☺️☺️share osd too
Yes! Osd is actually in the description. There’s a link.
@@PattyFlipz very nice bro
thats pretty rad dude! lets again sometime!!!
For sure man!!
Good stuff. Love micro LR builds. Rx antenna in front on a LR is better than the back
Thanks for the tip!
what an amazing video kudos to that drone and great flight
Thank you! 🙏
So Amazing and Wow!
👍 thank you! It’s a lot of fun
Beautiful place Nice pilot 🎉
PATRICK I FINALLY GOT A FACE WITH THE VOICE I LOVE YOU BRO!!! Which one is kibby?! Your frames are amazing. Guys you have to get one or 4. We live in and amazing time of history to enjoy these things that the earth had never seen.
Thanks man!! I show my ugly ass mug from time to time in previous videos but it’s so ugly you really don’t wanna see it. Kibby is the guy in the middle, or sometimes holding the iPad in the video. Cheers Seth!!
Very Nice! 🙂
Thanks John!!
Good work as usual!!
Thanks Greg! Hope you are well and enjoying the sun!!
Great video, I enjoy the P25!
Awesome! Glad you are enjoying yours! How’s the 6000kv motors?
Very very nice Micro LR.
Thank you! I did this on Sunday. I wanna go back!! 😂
Great project! Why 2.5" vs 3.5"? JUst curious. With the LiOn pack you're way over 250g anyway. I do love the look and performance.
Great question! Being above sub250g, a 3.5” can be made more efficient, lift more, fit more stuff! but I truly truly value compactness, lightness, it means a lot to me to carry light and still capable of having useable footage and flying far enough with the smallest stature you can get away with! I think the 2.5” strikes this balance but who knows. I will dare myself to go smaller in the future…Smaller quads are less intimidating visually to others and animals alike. It’s that delicate balance I’m trying to play and it’s cute. The p25 with 4s lion battery is its most extreme form... Other dedicated customers have made it work with 1300mah+ 4s lipos and remained sub250 with at least 10 minute flight times!! which is similar to the length of my flight here (except lion battery gives you more time just in case) p25 with lion battery etc. will probably not work with a naked GoPro action camera on top. It will just be terrible and overloaded maybe. 😂 that’s where bigger frames come in. P25 is not for everyone for sure, I’ll admit that. 👍 but it’s perfect for users who use the o3 au as primary or an ultralight action camera like a go2/3. P25 comes with small battery strap and medium battery strap for all sizes of 4s batteries. Ok I wrote too much 😂
Very cool. Wish I could commission you to build one for me.
Do you have a build video
Yes! It’s How to Build PROTO25 | Micro LR Ripper | Sub250g FPV Frame
czcams.com/video/nCcXu46YoOg/video.html
I tried these straps with my 3.5” using 720mah 4S and I kept ejecting batteries. Maybe I didn’t print them right. Idk, but after I had to go searching for the second battery as it got dark, I haven’t tried again.
I find I had to pull it pretty hard and had to be combined with a sticky battery pad to make it super stuck. But once it’s locked in, it’s been decent. But I haven’t crashed it that hard yet tho lol
@@JonFloFPV yeah, I can see for cruising these would work well. But I was ripping and had some decent, typical freestyle crashes. Maybe I hit the roof or hit a tree while flying in the front yard… nothing crazy like I was in a crazy bando with lots of rafters or anything
@JuicySmullietFPV yeah make sure you use sticky lipo grip, like tessegrip and if you think you pulled it hard, pull two extra notches more. Also they go on a specific way. The buckle has to be aligned to the side of the lipo, it cannot lay flat on top of the lipo. Not sure if you watched my protostrap video but the tutorial is there. Thanks for trying it though!!
Love this man! What VTX antenna are you running on the o3 air unit?
Hey man! It’s a flyfish Rc antenna for the o3 au. It’s got dual ufl coming out the post. You can find it on their website. Just search o3 antenna in the search bar
i have some questions maybe you can answer? can i add patch antennas to a dji integra goggles? and how much is that build cost just the drone? thanks
Hi, yes! But you have to follow this video I made: czcams.com/video/tviKmcDja5M/video.htmlsi=DBUoS1EEG7l3IkVy - how much to build the drone... Hmmm... I think it depends which systems you use and what parts you get, but assuming you are using a DJI O3 AU, and good parts, I guess it will be somewhere around $500 ~ $550 USD
@@PattyFlipz 550 usd thats fucking cheap! yeah i have a emax babyhawk 03 and i love it. but i want long range and whats out there from geprc and iflight im not interested. but this was amazing. are you gonna be selling the whole drone BNF? or just the frame etc? i want this drone with ELRS long ass antenna like you have. but i dont wanna mod my integra i just watch the video you made of it. if i have this drone with dji and long antenna for both elrs and dji antenna you think i can kinda do something like you did in that great video you made.
@Bobby2Hotty83 thanks man! Happy to hear this one appeals to you. At the moment I only sell frames so customers would need to gather parts on their own to build it. If you are from the US, I am working with a dealer AddictiveRC. We are working towards where he can be a one stop shop for Protofpv frames and matching electronics and shipped from the USA. Thanks for the interest!!
Do you still make the 2" frame? I'm really enjoying my proto25. Flys awesome. But I really want to test my patience with something a but small
Awesome!! No I don’t make the 2” anymore. Reason is It’s not that much lighter than p25, only more compact by 1” in all sides, and doesn’t fly with as much authority and less efficient using 4s. It’s only lighter like 3-5g. So I’m thinking how to make it special like a 2s lipo or 3s l-ion lipo with nano gps with different geometry… but I haven’t figured it out yet!
@PattyFlipz yeah I definitely understand. That's actually what I'm after as well. The proto 25 is perfect for the Air unit.
Have you considered the resizing with a Naked 03 or any other VTX? Definitely shave off weight and probably offer better balance
@PattyFlipz yea that would be nice, you don't see very many micro quads with gps (if any). But I see why power would be a factor
For p25? I have a naked o3 mount you can download and print in the downloads section of my page. You can find it in the p25 “extras” folder . The only thing with naked o3 is the possibility of overheating if searching for sats.. so at the moment I stick with the metal cases and the weight. Or you can do semi naked. Keep the tin looking caps on to dissipate heat. That might work too.
could you share the LiPo Strap STL? Would love to test this!
Oh i have a protostrap video with links. Just look it up on CZcams. Remember to tighten it real good the way i show you in the video. It only works a particular way and also highly recommend to use grippy sticky lipo pad
what happened to proto7??? do you ever plan to rebuild it?
I stopped working on proto7… but I haven’t given up. I have a new design called Proto78 ;) but I’m nowhere near done though. 😂
@@PattyFlipz ok
Where is the non-stabilized footage? I built a 4s 2" quad that weighs about 165g all up... and has crossfire and Vista inside. It's more of an acro 2 inch built like a 5 inch, that flies like a 5 inch.
Cool man! Props to ya! Oh yeah I heard about that quad before. Someone said p25 reminded them of it. Yeah here’s the GOGGLE DVR - Tiny King of the Hill | Sub250 Micro Long Range Ripper | Premium 2.5" FPV Drone Frame
czcams.com/video/50S_fbji4kI/video.html
@@PattyFlipz I bet ya didn't hear about it lol. I stripped down a transec beetle, shaved 27g of weight, put the lipo on top, and re-built it like a normal-shaped quad. It's the latest video I uploaded.
@@MysteryD Cool man! Oh for sure I didn't hear about your custom build :D Sounds awesome! :D