BUILDING drawers for your CANOPY | The Charger Drawer you NEED
Vložit
- čas přidán 20. 05. 2023
- In this video we’ll be making a charger drawer from scratch which forms a part of a drawer set for my canopy fitout. The drawer set will be constructed from aluminium and is also going to contain a regular drawer and a fridge/freezer. This video will take you through the cutting, the folding, the welding, the assembly and finally the overall design.
Drawer Handles: lcs4x4.com.au/shop/canopy-acc...
More frequent updates on Instagram: @designedandbuiltofficial
Channel Sponsors:
- Kincrome
- barratheworld.com
- Raceworks
- www.lcs4x4.com.au
Get I Believe In A Thing Called Love by The Darkness and over 1M + mainstream tracks here go.lickd.co/Music
License ID: wr1XWv5yVRz - Auta a dopravní prostředky
That latch handle on the slides is awesome. I will need to remember that. The whole setup is awesome.
Gday, I think this is a top setup, the charger draw with the cable tray is brilliant, I wish I could use cad better and be able to design like this, me and fusion are slowly become like each other, great job as always mate, cheers
A lot of thought goes into these designs and it really shines through in the end product. Love seeing the build progress and look forward to the revised editions and final product!
Thank you :)
If you don’t need the full deep in the charger draw you could make a pull out table that goes underneath it. It would only reduce the depth by about 50mm and it would give you heaps more work area.
Great idea Andrew. V2 perhaps!
One of the best design , construction , assembly 4x4 vids on you tube , one of the worst soundtrack songs I have ever heard 😂🤙
Cheers Rodney, haha not copping that. It’s an absolute cracker of a track. If I put on Beethoven to please you then I would have 100 comments saying it was the worst!
Love your design and construction videos, always learning from you, the post construction reviews are honest
Cheers Brian!
Totally agree love your honesty refreshing that you show your mistakes as well as the things you got right 👍
So keen for this 🤘
Great job! Thanks for the content, cheers
Excellent job.
Good wrap up at the end. Good to hear that even the pro’s make mistakes
Well done Richard, it's all a learning curve mate. Seeya Rob
That is freakin unbelievable man, well done!! Makes me want to up my inventor skills again!
Thanks Fionn, get stuck into it!
tidy work .
Good luck
Jim
Would be good to see abit more on the 3d design
Like a cad tutorial
Mint 👌👏
Love the rig ! All the content vids are getting much better. Cheers from Canada😊
Thank you!
Hot damn. Neat mate
Hi Richard, love the video and clear description of how you built your drawers, just an idea for version 2.0 you could put a 15mm fold in in the top edge of the drawers to remove the need for pinch weld and also ad strength to stop the potential Bowing of the drawers sides. Keen to see the kitchen setup in the next vid
Thank your definitely an option yep! Would be interested to trial it out and see which is better for use.
Nice work mate, for someone self taught with Ali TIG you're killin it. Stripper disc is a good step for prep, then acetone, Acetone, ACETONE! good wipe with a lint free cloth and let it evaporate, then go for gold!
Thanks mate!!
Great work as usual, looks awesome mate. Looking forward to the kitchen setup
Thank you!
Not sure if you've mentioned it before and I've missed it, but what drone do you have? The footage it shoots looks great
Was using a Mavic pro 1 for the cape trip but have recently upgraded to the mini 3 and haven’t looked back!
Cheers mate
Definitely would look at a slide out table under that charging draw it looked like there was enough room to still fit all the gear plus the table
Absolutely, great idea!
nice to see the time laps camera is not turning and shaking around now.😁 Great JOB and super welding work !
Cheers Laurent!
What cad do u use and is it for free 👍👍❤️❤️🍺🍺 love the build
What a tune! Throwback
Hi love your work great job! What CAD program do you use for designing?
Thought you'd consider the rear Tyre and Jerry can hangover. Might create extra weight since your adding draws and things into the canopy.
Nowhere else to put them!
Hi mate awesome canopy build what cad software do you use
Sweet as
top work mate, have even more respect for you and the build now after starting to learn cad. out of interest, do you run a foot pedal on your tig?
Thanks Brady! I learnt with a foot pedal but can weld without it now. I still weld most aluminium with it if it’s on my weld table, if it’s hard to get to I just run the hand control!
Now that you’re 10months post build I would love an update. I’m looking at doing something similar but wondering how you have solved the movement/risk of damage while underway. Also if you have made provision for cooling. I know my drone gets pretty warm while charging.
Hey mate, no dramas after 10 months! Working like a charm. Not much I would change apart from possibly making it a little more organised in there.
Never ceases to amaze me how much gear a person that owns cameras professes to need compared to photographers and videographers
Haha 🤷🏻♂️
Awesome work mate very clean. Where are the 12v points from if you dont mind me asking.
Thank you! EBay!
Well done on your design, what is the foam that is used in tool draws for placement of tools. Could that be used to position your devices?
Cheers Greg and absolutely. Foam or 3d print are both great options.
What 3d scanner do you use or recommend please
Hey mate what software do you design in ?
Having been a chippy for 20 plus years and having had so many tool box layouts. Its not intiy you use them forna while that you learn what you like and don't like. But looks like you have put a heap of thought into these. And your at least not working with 18mm ply and a skillsaw😂